Reason:
======
undo_space_dblwr test case fails if the first page of undo
tablespace is not flushed before restart the server. While
restarting the server, InnoDB fails to detect the first
page of undo tablespace from doublewrite buffer.
Fix:
===
Use "ib_log_checkpoint_avoid_hard" debug sync point
to avoid checkpoint and make sure to flush the
dirtied page before killing the server.
innodb_make_page_dirty(): Fails to set
srv_fil_make_page_dirty_debug variable.
Improve the performance of slave connect using B+-Tree indexes on each binlog
file. The index allows fast lookup of a GTID position to the corresponding
offset in the binlog file, as well as lookup of a position to find the
corresponding GTID position.
This eliminates a costly sequential scan of the starting binlog file
to find the GTID starting position when a slave connects. This is
especially costly if the binlog file is not cached in memory (IO
cost), or if it is encrypted or a lot of slaves connect simultaneously
(CPU cost).
The size of the index files is generally less than 1% of the binlog data, so
not expected to be an issue.
Most of the work writing the index is done as a background task, in
the binlog background thread. This minimises the performance impact on
transaction commit. A simple global mutex is used to protect index
reads and (background) index writes; this is fine as slave connect is
a relatively infrequent operation.
Here are the user-visible options and status variables. The feature is on by
default and is expected to need no tuning or configuration for most users.
binlog_gtid_index
On by default. Can be used to disable the indexes for testing purposes.
binlog_gtid_index_page_size (default 4096)
Page size to use for the binlog GTID index. This is the size of the nodes
in the B+-tree used internally in the index. A very small page-size (64 is
the minimum) will be less efficient, but can be used to stress the
BTree-code during testing.
binlog_gtid_index_span_min (default 65536)
Control sparseness of the binlog GTID index. If set to N, at most one
index record will be added for every N bytes of binlog file written.
This can be used to reduce the number of records in the index, at
the cost only of having to scan a few more events in the binlog file
before finding the target position
Two status variables are available to monitor the use of the GTID indexes:
Binlog_gtid_index_hit
Binlog_gtid_index_miss
The "hit" status increments for each successful lookup in a GTID index.
The "miss" increments when a lookup is not possible. This indicates that the
index file is missing (eg. binlog written by old server version
without GTID index support), or corrupt.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Most things where wrong in the test suite.
The one thing that was a bug was that table_map_id was in some places
defined as ulong and in other places as ulonglong. On Linux 64 bit this
is not a problem as ulong == ulonglong, but on windows this caused failures.
Fixed by ensuring that all instances of table_map_id are ulonglong.
optimizer-adjust_secondary_key_costs is added to provide 2 small
adjustments to the 10.x optimizer cost model. This can be used in the
case where the optimizer wrongly uses a secondary key instead of a
clustered primary key.
The reason behind this change is that MariaDB 10.x does not take into
account that for engines like InnoDB, that scanning a primary key can be
up to 7x faster than scanning a secondary key + read the row data trough
the primary key.
The different values for optimizer_adjust_secondary_key_costs are:
optimizer_adjust_secondary_key_costs=0
- No changes to current model
optimizer_adjust_secondary_key_costs=1
- Ensure that the cost of of secondary indexes has a cost of at
least 5x times the cost of a clustered primary key (if one exists).
This disables part of the worst_seek optimization described below.
optimizer_adjust_secondary_key_costs=2
- Disable "worst_seek optimization" and adjust filter cost slightly
(add cost of 1 if filter is used).
The idea behind 'worst_seek optimization' is that we limit the
cost for all non clustered ref access to the least of:
- best-rows-by-range (or all rows in no range found) / 10
- scan-time-table (roughly number of file blocks to scan table) * 3
In addition we also do not try to use rowid_filter if number of rows
estimated for 'ref' access is less than the worst_seek limitation.
The idea is that worst_seek is trying to take into account that if
we do a lot of accesses through a key, this is likely to be cached.
However it only does this for secondary keys, and not for clustered
keys or index only reads.
The effect of the worst_seek are:
- In some cases 'ref' will have a much lower cost than range or using
a clustered key.
- Some possible rowid filters for secondary keys will be ignored.
When implementing optimizer_adjust_secondary_key_costs=2, I noticed
that there is a slightly different costs for how ref+filter and
range+filter are calculated. This caused a lot of range and
range+filter to change to ref+filter, which is not good as
range+filter provides the optimizer a better estimate of how many
accepted rows there will be in the result set.
Adding a extra small cost (1 seek) when using filter mitigated the
above problems in almost all cases.
This patch should not be applied to MariaDB 11.0 as worst_seeks is
removed in 11.0 and the cost calculation for clustered keys, secondary
keys, index scan and filter is more exact.
Test case changes for --optimizer-adjust_secondary_key_costs=1
(Fix secondary key costs to be 5x of primary key):
- stat_tables_innodb:
- Complex change (probably ok as number of rows are really small)
- ref over 1 row changed to range over 10 rows with join buffer
- ref over 5 rows changed to eq_ref
- secondary ref over 1 row changed to ref of primary key over 4 rows
- Change of key to use longer key with index pushdown (a little
bit worse but not significant).
- Change to use secondary (1 row) -> primary (4 rows)
- rowid_filter_innodb:
- index_merge (2 rows) & ref (1) -> all (23 rows) -> primary eq_ref.
Test case changes for --optimizer-adjust_secondary_key_costs=2
(remove of worst_seeks & adjust filter cost):
- stat_tables_innodb:
- Join order change (probably ok as number of rows are really small)
- ref (5 rows) & ref(1 row) changed to range (10 rows & join buffer)
& eq_ref.
- selectivity_innodb:
- ref -> ref|filter (ok)
- rowid_filter_innodb:
- ref -> ref|filter (ok)
- range|filter (64 rows) changed to ref|filter (128 rows).
ok as ref|filter outputs wrong number of rows in explain.
- range, range_mrr_icp:
-ref (500 rows -> ALL (1000 rows) (ok)
- select_pkeycache, select, select_jcl6:
- ref|filter (2 rows) -> ref (2 rows) (ok)
- selectivity:
- ref -> ref_filter (ok)
- range:
- Change of 'filtered' but no stat or plan change (ok)
- selectivity:
- ref -> ref+filter (ok)
- Change of filtered but no plan change (ok)
- join_nested_jcl6:
- range -> ref|filter (ok as only 2 rows)
- subselect3, subselect3_jcl6:
- ref_or_null (4 rows) -> ALL (10 rows) (ok)
- Index_subquery (4 rows) -> ALL (10 rows) (ok)
- partition_mrr_myisam, partition_mrr_aria and partition_mrr_innodb:
- Uses ALL instead of REF for a key value that is the same for > 50%
of rows. (good)
order_by_innodb:
- range (200 rows) -> ref (20 rows)+filesort (ok)
- subselect_sj2_mat:
- One test changed. One ALL removed and replaced with eq_ref. Likely
to be better.
- join_cache:
- Changed ref over 60% of the rows to use hash join (ok)
- opt_tvc:
- Changed to use eq_ref instead of ref with plan change (probably ok)
- opt_trace:
- No worst/max seeks clipping (good).
- Almost double range_scan_time and index_scan_time (ok).
- rowid_filter:
- ref -> ref|filtered (ok)
- range|filter (77 rows) changed to ref|filter (151 rows). Proably
ok as ref|filter outputs wrong number of rows in explain.
Reviewer: Sergei Petrunia <sergey@mariadb.com>
rpl_semi_sync_slave_enabled_consistent.test and the first part of
the commit message comes from Brandon Nesterenko.
A test to show how to induce the "Read semi-sync reply magic number
error" message on a primary. In short, if semi-sync is turned on
during the hand-shake process between a primary and replica, but
later a user negates the rpl_semi_sync_slave_enabled variable while
the replica's IO thread is running; if the io thread exits, the
replica can skip a necessary call to kill_connection() in
repl_semisync_slave.slave_stop() due to its reliance on a global
variable. Then, the replica will send a COM_QUIT packet to the
primary on an active semi-sync connection, causing the magic number
error.
The test in this patch exits the IO thread by forcing an error;
though note a call to STOP SLAVE could also do this, but it ends up
needing more synchronization. That is, the STOP SLAVE command also
tries to kill the VIO of the replica, which makes a race with the IO
thread to try and send the COM_QUIT before this happens (which would
need more debug_sync to get around). See THD::awake_no_mutex for
details as to the killing of the replica’s vio.
Notes:
- The MariaDB documentation does not make it clear that when one
enables semi-sync replication it does not matter if one enables
it first in the master or slave. Any order works.
Changes done:
- The rpl_semi_sync_slave_enabled variable is now a default value for
when semisync is started. The variable does not anymore affect
semisync if it is already running. This fixes the original reported
bug. Internally we now use repl_semisync_slave.get_slave_enabled()
instead of rpl_semi_sync_slave_enabled. To check if semisync is
active on should check the @@rpl_semi_sync_slave_status variable (as
before).
- The semisync protocol conflicts in the way that the original
MySQL/MariaDB client-server protocol was designed (client-server
send and reply packets are strictly ordered and includes a packet
number to allow one to check if a packet is lost). When using
semi-sync the master and slave can send packets at 'any time', so
packet numbering does not work. The 'solution' has been that each
communication starts with packet number 1, but in some cases there
is still a chance that the packet number check can fail. Fixed by
adding a flag (pkt_nr_can_be_reset) in the NET struct that one can
use to signal that packet number checking should not be done. This
is flag is set when semi-sync is used.
- Added Master_info::semi_sync_reply_enabled to allow one to configure
some slaves with semisync and other other slaves without semisync.
Removed global variable semi_sync_need_reply that would not work
with multi-master.
- Repl_semi_sync_master::report_reply_packet() can now recognize
the COM_QUIT packet from semisync slave and not give a
"Read semi-sync reply magic number error" error for this case.
The slave will be removed from the Ack listener.
- On Windows, don't stop semisync Ack listener just because one
slave connection is using socket_id > FD_SETSIZE.
- Removed busy loop in Ack_receiver::run() by using
"Self-pipe trick" to signal new slave and stop Ack_receiver.
- Changed some Repl_semi_sync_slave functions that always returns 0
from int to void.
- Added Repl_semi_sync_slave::slave_reconnect().
- Removed dummy_function Repl_semi_sync_slave::reset_slave().
- Removed some duplicate semisync notes from the error log.
- Add test of "if (get_slave_enabled() && semi_sync_need_reply)"
before calling Repl_semi_sync_slave::slave_reply().
(Speeds up the code as we can skip all initializations).
- If epl_semisync_slave.slave_reply() fails, we disable semisync
for that connection.
- We do not call semisync.switch_off() if there are no active slaves.
Instead we check in Repl_semi_sync_master::commit_trx() if there are
no active threads. This simplices the code.
- Changed assert() to DBUG_ASSERT() to ensure that the DBUG log is
flushed in case of asserts.
- Removed the internal rpl_semi_sync_slave_status as it is not needed
anymore. The @@rpl_semi_sync_slave_status status variable is now
mapped to rpl_semi_sync_enabled.
- Removed rpl_semi_sync_slave_enabled as it is not needed anymore.
Repl_semi_sync_slave::get_slave_enabled() contains the active status.
- Added checking that we do not add a slave twice with
Ack_receiver::add_slave(). This could happen with old code.
- Removed Repl_semi_sync_master::check_and_switch() as it is not
needed anymore.
- Ensure that when we call Ack_receiver::remove_slave() that the slave
is removed from the listener before function returns.
- Call listener.listen_on_sockets() outside of mutex for better
performance and less contested mutex.
- Ensure that listening is ignoring newly added slaves when checking for
responses.
- Fixed the master ack_receiver listener is not killed if there are no
connected slaves (and thus stop semisync handling of future
connections). This could happen if all slaves sockets where would be
marked as unreliable.
- Added unlink() to base_ilist_iterator and remove() to
I_List_iterator. This enables us to remove 'dead' slaves in
Ack_recever::run().
- kill_zombie_dump_threads() now does killing of dump threads properly.
- It can now kill several threads (should be impossible but could
happen if IO slaves reconnects very fast).
- We now wait until the dump thread is done before starting the
dump.
- Added an error if kill_zombie_dump_threads() fails.
- Set thd->variables.server_id before calling
kill_zombie_dump_threads(). This simplies the code.
- Added a lot of comments both in code and tests.
- Removed DBUG_EVALUATE_IF "failed_slave_start" as it is not used.
Test changes:
- rpl.rpl_session_var2 added which runs rpl.rpl_session_var test with
semisync enabled.
- Some timings changed slight with startup of slave which caused
rpl_binlog_dump_slave_gtid_state_info.text to fail as it checked the
error log file before the slave had started properly. Fixed by
adding wait_for_pattern_in_file.inc that allows waiting for the
pattern to appear in the log file.
- Tests have been updated so that we first set
rpl_semi_sync_master_enabled on the master and then set
rpl_semi_sync_slave_enabled on the slaves (this is according to how
the MariaDB documentation document how to setup semi-sync).
- Error text "Master server does not have semi-sync enabled" has been
replaced with "Master server does not support semi-sync" for the
case when the master supports semi-sync but semi-sync is not
enabled.
Other things:
- Some trivial cleanups in Repl_semi_sync_master::update_sync_header().
- We should in 11.3 changed the default value for
rpl-semi-sync-master-wait-no-slave from TRUE to FALSE as the TRUE
does not make much sense as default. The main difference with using
FALSE is that we do not wait for semisync Ack if there are no slave
threads. In the case of TRUE we wait once, which did not bring any
notable benefits except slower startup of master configured for
using semisync.
Co-author: Brandon Nesterenko <brandon.nesterenko@mariadb.com>
This solves the problem reported in MDEV-32960 where a new
slave may not be registered in time and the master disables
semi sync because of that.
Fix old_mode flags conflict between OLD_MODE_NO_NULL_COLLATION_IDS
and OLD_MODE_LOCK_ALTER_TABLE_COPY.
Both flags used to be 1 << 6, now OLD_MODE_LOCK_ALTER_TABLE_COPY changed
to be 1 << 7
Connector/NET does not expect collation IDs returned by "show collations"
to be NULL, runs into an exception.
The fix is to determine connector/net using its connection attributes,
then make sure "show collations" does not output NULL IDs.
The patch introduces new old_mode NO_NULL_COLLATION_IDs, that is
automatically set, once MySQL Connector/NET connection is determined.
A test was added, that uses MySql.Data from powershell - only works
if MySql.Data is installed into GAC (i.e with C/NET MSI package)
This patch provides a new mode FULL_NODUP to binlog_row_image system
variable. With FULL_NODUP mode, all columns are included in before
image, but only updated columns are included in after image for UPDATE.
While all columns are included in the after image for INSERT.
FULL_NODUP is for replacing FULL mode. It includes all data of
the before and after image as FULL mode, but it uses less storage
especially in the case that only a few columns are updated.
Note: It will binlog full before and after image for all modes if the
table has no primary key. FULL_NODUP follows the behavior.
This allows to simplify net_real_read() and net_real_write() a bit.
Removed some superfluous #ifdef/ifndef MYSQL_SERVER from net_serv.cc
The code always runs in server, either normal or embedded.
Dead code for switching socket between blocking and non-blocking modes,
is also removed.
Removed pthread_kill() with alarm signal that woke up main thread on
server shutdown. Used shutdown(2) on polling sockets instead, to the same
effect.
Removed yet another superstitious pthread_kill(), that ran on non-Windows
in terminate_slave_thread().
Compute binlog checksums (when enabled) already when writing events
into the statement or transaction caches, where before it was done
when the caches are copied to the real binlog file. This moves the
checksum computation outside of holding LOCK_log, improving
scalabitily.
At stmt/trx cache write time, the final end_log_pos values are not
known, so with this patch these will be set to 0. Events that are
written directly to the binlog file (not through stmt/trx cache) keep
the correct end_log_pos value. The GTID and COMMIT/XID events at the
start and end of event groups are written directly, so the zero
end_log_pos is only for events in the middle of event groups, which
do not negatively affect replication.
An option --binlog-legacy-event-pos, off by default, is provided to
disable this behavior to provide backwards compatibility with any
external applications that might rely on end_log_pos in events in the
middle of event groups.
Checksums cannot be pre-computed when binlog encryption is enabled, as
encryption relies on correct end_log_pos to provide part of the
nonce/IV.
Checksum pre-computation is also disabled for WSREP/Galera, as it uses
events differently in its write-sets and so on. Extending pre-computation of
checksums to Galera where it makes sense could be added in a future patch.
The current --binlog-checksum configuration is saved in
binlog_cache_data at transaction start and used to pre-compute
checksums in cache, if applicable. When the cache is later copied to
the binlog, a check is made if the saved value still matches the
configured global value; if so, the events are block-copied directly
into the binlog file. If --binlog-checksum was changed during the
transaction, events are re-written to the binlog file one-by-one and
the checksums recomputed/discarded as appropriate.
Reviewed-by: Monty <monty@mariadb.org>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
- Introduced the variable "innodb_truncate_temporary_tablespace_now"
to shrink the temporary tablespace.
Steps for shrinking the temporary tablespace:
1) Find the last used extent in temporary tablespace
by iterating through the BITMAP in extent descriptor pages
2) If the last used extent is lesser than user specified size
then set desired target size to user specified size
3) Store the page contents of "to be modified" extent
descriptor pages, latches the "to be modified" extent
descriptor pages and check for buffer pool memory availability
4) Update the FSP_SIZE and FSP_FREE_LIMIT in header page
5) Remove the "to be truncated" pages from FSP_FREE and
FSP_FREE_FRAG list
6) Reset the bitmap in the last descriptor pages for the
"to be truncated" pages.
7) Clear the freed range in temporary tablespace which
are to be truncated.
8) Evict the "to be truncated" temporary tablespace pages
from LRU list.
9) In case of multiple files, calculate the truncated last
file size and do truncation in last file
10) Commit the mini-transaction for shrinking the tablespace
