When replicated events are from Master unaware of MariaDB GTID their handling by
the Parallel slave misses Seconds_Behind_Master updating.
In the bug condition the Show-Slave-Status' field remains unchanged.
Because in such case event execution is sequential the bug
is fixed with deploying the same logics as in the explicit single-threaded mode
with is to set
Relay_log_event::last_master_timestamp
member early at the end of event reading from the relay log.
main.derived_cond_pushdown: Move all 10.3 tests to the end,
trim trailing white space, and add an "End of 10.3 tests" marker.
Add --sorted_result to tests where the ordering is not deterministic.
main.win_percentile: Add --sorted_result to tests where the
ordering is no longer deterministic.
set both `password` and `authentication_string` columns in `mysql`.`user`
table for now.
Suppress the "password was ignored" warning if the password is
the same as the authentication string
Support SET PASSWORD for authentication plugins.
Authentication plugin API is extended with two optional methods:
* hash_password() is used to compute a password hash (or digest)
from the plain-text password. This digest will be stored in mysql.user
table
* preprocess_hash() is used to convert this digest into some memory
representation that can be later used to authenticate a user.
Build-in plugins convert the hash from hexadecimal or base64 to binary,
to avoid doing it on every authentication attempt.
Note a change in behavior: when loading privileges (on startup or on
FLUSH PRIVILEGES) an account with an unknown plugin was loaded with a
warning (e.g. "Plugin 'foo' is not loaded"). But such an account could
not be used for authentication until the plugin is installed. Now an
account like that will not be loaded at all (with a warning, still).
Indeed, without plugin's preprocess_hash() method the server cannot know
how to load an account. Thus, if a new authentication plugin is
installed run-time, one might need FLUSH PRIVILEGES to activate all
existing accounts that were using this new plugin.
Don't distinguish between a "password hash" and "authentication string"
anymore. Now both are stored in mysql.user.authentication_string, both
are handled identically internally. A "password hash" is just how some
particular plugins interpret authentication string.
Set mysql.user.plugin even if there is no password. The server will use
mysql_native_password plugin in these cases, let's make it expicit.
Remove LEX_USER::pwhash.
consistently) on Replication Slave
lower_case_table_names 0 -> 1 replication works, it's safe as long as
mixed case names mapping to the lower case ones is one-to-one
If a mtr test runs multiple servers and only some of them get
restarted on whatever reason with new command-line parameters,
then subsequent mtr test may fail, because no cleanup is performed.
Replication and Galera test suites are affected.
In the mtr script, there is a server_need_restart function
that decides whether we need to start a new mysqld process before
the new (next) test. If the mysqld parameters were changed in the
previous test - not necessarily the parameters of the primary mysqld
server, maybe even the secondary server parameters - this function
decides to start a new mysqld process. But since it does not remove
the old (changed) parameters, the new process starts with the
parameters changed by the *previous* test.
To correct this error, we must delete the modified process
parameters after checking that they have been changed during
the previous test.
This patch also simplifies and makes more stable the
galera_drop_database test, during debugging of which this
problem was detected.
https://jira.mariadb.org/browse/MDEV-17421
This would happen especially in optimistic parallel replication, where there
is a good chance that a transaction will be rolled back (due to conflicts)
after it has executed record_gtid(). If the transaction did any deletions of
old rows as part of record_gtid(), those deletions will be undone as well.
And the code did not properly ensure that the deletions would be re-tried.
This patch makes record_gtid() remember the list of deletions done as part
of a transaction. Then in rpl_slave_state::update() when the changes have
been committed, we discard the list. However, in case of error and rollback,
in cleanup_context() we will instead put the list back into
rpl_global_gtid_slave_state so that the deletions will be re-tried later.
Probably fixes part of the cause of MDEV-12147 as well.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Make all system tables in mysql directory of type
engine=Aria
Privilege tables are using transactional=1
Statistical tables are using transactional=0, to allow them
to be quickly updated with low overhead.
Help tables are also using transactional=0 as these are only
updated at init time.
Other changes:
- Aria store engine is now a required engine
- Update comment for Aria tables to reflect their new usage
- Fixed that _ma_reset_trn_for_table() removes unlocked table
from transaction table list. This was needed to allow one
to lock and unlock system tables separately from other
tables, for example when reading a procedure from mysql.proc
- Don't give a warning when using transactional=1 for engines
that is using transactions. This is both logical and also
to avoid warnings/errors when doing an alter of a privilege
table to InnoDB.
- Don't abort on warnings from ALTER TABLE for changes that
would be accepted by CREATE TABLE.
- New created Aria transactional tables are marked as not movable
(as they include create_rename_lsn).
- bootstrap.test was changed to kill orignal server, as one
can't anymore have two servers started at same time on same
data directory and data files.
- Disable maria.small_blocksize as one can't anymore change
aria block size after system tables are created.
- Speed up creation of help tables by using lock tables.
- wsrep_sst_resync now also copies Aria redo logs.
with spatial index
So the issue is since it is spatial index , at the time of searching index
for key (Rows_log_event::find_row) we use wrong field image we use
Field::itRAW while we should be using Field::itMBR
When the semisync slave is being stopped with STOP SLAVE just after
the master was shut down it attempts to reconnect with the master
anyway per a semisync routine. Instead of an expected error the
io-thread segfauls in mysql_real_connect() execution at
!mysql->options.extension->async_context
check trying to reach the extension's member while mysql->options.extension is
actually and correctly NULL.
Apparently not-NULL check for mysql->options.extension was missed and
it's deployed by the patch to fix this issue.
As a bonus it also tackles an assert
Thread 0x7f16c72148c0 (LWP 24639) 0x00007f16c53b3bf2 in __GI___assert_fail (assertion=0x55a686117558 "global_status_var.global_memory_used == 0", file=0x55a6861171e8 "/home/andrei/MDB/WTs/10.3-clean/sql/mysqld.cc", line=2201, function=0x55a68611fa80 <mysqld_exit(int)::__PRETTY_FUNCTION__> "void mysqld_exit(int)") at assert.c:101
in a new test of the patch. The reason of the assert was insufficient cleanup
in Repl_semi_sync_slave::kill_connection() which has a branch where a MYSQL instance
was left out unfred.
Actually if we use "set password for " command this changes the checksum
of mysql.user table
-localhost root Y Y Y Y Y Y Y Y YY Y Y Y Y Y Y Y Y Y Y Y $
Y Y Y Y Y Y Y 0 00 0 N N 0.000000
+localhost root Y Y Y Y Y Y Y Y YY Y Y Y Y Y Y Y Y Y Y Y Y
Y Y Y Y Y Y Y 0 00 0 mysql_native_password N N 0.000000
In short we replace '' with mysql_native_password
which make checksum to be different, and hence check test case fails.
So we use UPDATE mysql.user command.
as a separate source for data
Actually MDEV-15867 and MDEV-16192 are same, Slave adds "or replace" to create
table stmt. So create table t1 is create or replace on slave. So this bug
is not because of replication, We can get this bug on general server if we
manually add or replace to create query.
Problem:- So if we try to create table t1 (same name as of temp table t1 ) via
CREATE or replace TABLE t AS SELECT * FROM t;
Since in this query we are creating table from select * from t1 , we call
unique_table function to see whether if source and destination table are same.
But there is one issue unique_table does not account if source table is tmp table
in this case source and destination table can be same.
Solution:- We will change find_dup_table to not to look for temp table if
CHECK_DUP_SKIP_TEMP_TABLE flag is on.
