The parameters innodb_thread_concurrency and innodb_commit_concurrency
were useful years ago when both computing resources and the implementation
of some shared data structures were limited. MySQL 5.0 or 5.1 had trouble
scaling beyond 8 concurrent connections. Most of the scalability bottlenecks
have been removed since then, and the transactions per second delivered
by MariaDB Server 10.5 should not dramatically drop upon exceeding the
'optimal' number of connections.
Hence, enabling any concurrency throttling for InnoDB actually makes
things worse. We have seen many customers mistakenly setting this to a
small value like 16 or 64 and then complaining the server was slow.
Ignoring the parameters allows us to remove some normally unused code
and data structures, which could slightly improve performance.
innodb_thread_concurrency, innodb_commit_concurrency,
innodb_replication_delay, innodb_concurrency_tickets,
innodb_thread_sleep_delay, innodb_adaptive_max_sleep_delay:
Deprecate and ignore; hard-wire to 0.
The column INFORMATION_SCHEMA.INNODB_TRX.trx_concurrency_tickets
will always report 0.
Problem:- rpl_parallel2 was failing non-deterministically
Analysis:-
When FLUSH TABLES WITH READ LOCK is executed, it will allow all worker
threads to complete their ongoing transactions and then it will pause them.
At this state FTWRL will proceed to acquire global read lock. FTWRL first
blocks threads from starting new commits, then upgrades the lock to block
commit of existing transactions.
Step1:
FLUSH TABLES WITH READ LOCK - Blocks new commits
Step2:
* STOP SLAVE command enables 'force_abort=1' which unblocks workers,
they continue to execute events.
* T1: Waits in 'record_gtid' call to update 'gtid_slave_pos' table with
its current GTID, but it is blocked becuase of Step1.
* T2: Holds COMMIT lock and waits for T1 to commit.
Step3:
FLUSH TABLES WITH READ LOCK - Waiting to get BLOCK_COMMIT.
This results in deadlock. When STOP SLAVE command allows paused workers to
proceed, workers should skip the execution of all further events, similar
to 'conservative' parallel mode.
Solution:-
We will assign 1 to skip_event_group when we are aborted in do_ftwrl_wait.
rpl_parallel_entry->pause_sub_id is only reset when force_abort is off in
rpl_pause_after_ftwrl.
Call mark_columns_per_binlog_row_image before find_row() to set up table->vcol_set early,
so the virtual column value will be updated after record read (ha_rnd_pos/ha_index_next/etc)
by table->update_virtual_fields() call
Problem:
=======
rpl.rpl_slave_load_tmpdir_not_exist 'stmt' w3 [ fail ] Found warnings/errors
in server log file!
Test ended at 2017-09-27 20:34:55
[Warning] Master is configured to log replication events with checksum, but
will not send such events to slaves that cannot process them
^ Found warnings in /mnt/buildbot/build/mariadb-10.2.10/mysql-test/var/3/log/mysqld.1.err
ok
Analysis:
========
When slave tries to connect to master 'get_master_version_and_clock' function
is invoked to perform elaborated slave-master handshake. During this process
slave server queries master server, to know if it is checksum aware and at the
same time master is notified about its CRC-awareness. The master's side
instant value of @@global.binlog_checksum is stored in the dump thread's
uservar area as well as cached locally to become known in consensus by master
and slave.
Post hand-shake slave requests master for binlog dump. It sends
'COM_BINLOG_DUMP'. This command is sent to master by 'cli_advanced_command'
call. If there is some temporary network failure during this request_dump
call, 'end_server' is invoked to close the current connection between master
and slave. Upon connection close the dump thread on the master gets terminated
and it clears the 'uservar' data it got through master-slave handshake.
The 'COM_BINLOG_DUMP' command is sent once again without master-slave
handshake. Since the checksum data is not available with new dump thread a
warning gets reported.
Fix:
===
Upon network write error donot attempt reconnect, proceed to master-slave
handshake. This ensures that master is aware of slave's capability to use
checksums.
Problem:
========
During point in time recovery of binary log syntax error is reported for
BEGIN statement and recovery fails.
Analysis:
=========
In MariaDB 10.3 and later, setting the sql_mode system variable to Oracle
allows the server to understand a subset of Oracle's PL/SQL language. When
sql_mode=ORACLE is set, it switches the parser from the MariaDB parser to
Oracle compatible parser. With this change 'BEGIN' is not considered as
'START TRANSACTION'. Hence the syntax error is reported.
Fix:
===
At preset 'BEGIN' query is generated from 'Gtid_log_event::print'. The current
session specific 'sql_mode' information is not present as part of
'Gtid_log_event'. If it was available then, mysqlbinlog tool can make use of
'sql_mode == ORACLE' and can output "START TRANSACTION" in this particular
mode and for other sql_modes it will write "BEGIN" as part of output. Since it
is not available 'mysqlbinlog' tool will output all 'BEGIN' statements as
'START TRANSACTION' irrespective of 'sql_mode'.
The issue was:
T1, a parallel slave worker thread, is waiting for another worker thread to
commit. While waiting, it has the MDL_BACKUP_COMMIT lock.
T2, working for mariabackup, is doing BACKUP STAGE BLOCK_COMMIT and blocks
all commits.
This causes a deadlock as the thread T1 is waiting for can't commit.
Fixed by moving locking of MDL_BACKUP_COMMIT from ha_commit_trans() to
commit_one_phase_2()
Other things:
- Added a new argument to ha_comit_one_phase() to signal if the
transaction was a write transaction.
- Ensured that ha_maria::implicit_commit() is always called under
MDL_BACKUP_COMMIT. This code is not needed in 10.5
- Ensure that MDL_Request values 'type' and 'ticket' are always
initialized. This makes it easier to check the state of the MDL_Request.
- Moved thd->store_globals() earlier in handle_rpl_parallel_thread() as
thd->init_for_queries() could use a MDL that could crash if store_globals
where not called.
- Don't call ha_enable_transactions() in THD::init_for_queries() as this
is both slow (uses MDL locks) and not needed.
Problem:
========
rpl.rpl_slave_alias_replica test fails sporadically on build bot as shown
below.
rpl.rpl_slave_alias_replica 'innodb,stmt' w4 [ fail ]
+++ /usr/local/mariadb-10.5.4-linux-x86_64/mysql-test/suite/rpl/r/
rpl_slave_alias_replica.reject 2020-06-12 09:52:25.191267945 +0000
@@ -22,6 +22,7 @@
SHOW REPLICA HOSTS;
Server_id Host Port Master_id
2 127.0.0.1 SLAVE_PORT 1
+2 127.0.0.1 SLAVE_PORT 1
Analysis:
========
The SHOW REPLICA HOSTS command reports an additional row for the same server
occasionally. This happens because of zombie dump threads on the master.
Error log from master also confirms that "A slave with the same
server_uuid/server_id as this slave has connected to the master". Since SHOW
REPLICA HOSTS goes through the list of dump threads and reports the
corresponding hosts,the same host is reported twice.
Fix:
===
Instead of capturing the SHOW REPLICA HOSTS command in result file use
wait_show_condition.inc. This will ensure that SHOW REPLICA HOSTS command
fetches slave host details.
On FreeBSD, perl isn't in /usr/bin, its in /usr/local/bin or
elsewhere in the path.
Like storage/{maria/unittest/,}ma_test_* , we use /usr/bin/env to
find perl and run it.
Problem:
=======
The "Start binlog_dump" message hasn't been updated to include the slave's
requested GTID position:
20:05:05 139836760311552 [Note] Start binlog_dump to slave_server(2), pos(, 4)
For diagnostic purposes, it would be helpful if the GTID position were
included.
Fix:
===
Imporve "Start binlog_dump" print message to include "using_gtid" and
"GTID position" requested by slave.
Ex:
[Note] Start binlog_dump to slave_server(2), pos(, 4), using_gtid(1),
gtid('1-1-201,2-2-100')
[Note] Start binlog_dump to slave_server(3), pos('mariadb-bin.004142',
507988273), using_gtid(0), gtid('')
The immediate bug was caused by a failure to recognize a correct
position to stop the slave applier run in optimistic parallel mode.
There were the following set of issues that the analysis unveil.
1 incorrect estimate for the event binlog position passed to
is_until_satisfied
2 wait for workers to complete by the driver thread did not account non-group events
that could be left unprocessed and thus to mix up the last executed
binlog group's file and position:
the file remained old and the position related to the new rotated file
3 incorrect 'slave reached file:pos' by the parallel slave report in the error log
4 relay log UNTIL missed out the parallel slave branch in
is_until_satisfied.
The patch addresses all of them to simplify logics of log change
notification in either the master and relay-log until case.
P.1 is addressed with passing the event into is_until_satisfied()
for proper analisis by the function.
P.2 is fixed by changes in handle_queued_pos_update().
P.4 required removing relay-log change notification by workers.
Instead the driver thread updates the notion of the current relay-log
fully itself with aid of introduced
bool Relay_log_info::until_relay_log_names_defer.
An extra print out of the requested until file:pos is arranged
with --log-warning=3.
The immediate bug was caused by a failure to recognize a correct
position to stop the slave applier run in optimistic parallel mode.
There were the following set of issues that the analysis unveil.
1 incorrect estimate for the event binlog position passed to
is_until_satisfied
2 wait for workers to complete by the driver thread did not account non-group events
that could be left unprocessed and thus to mix up the last executed
binlog group's file and position:
the file remained old and the position related to the new rotated file
3 incorrect 'slave reached file:pos' by the parallel slave report in the error log
4 relay log UNTIL missed out the parallel slave branch in
is_until_satisfied.
The patch addresses all of them to simplify logics of log change
notification in either the master and relay-log until case.
P.1 is addressed with passing the event into is_until_satisfied()
for proper analisis by the function.
P.2 is fixed by changes in handle_queued_pos_update().
P.4 required removing relay-log change notification by workers.
Instead the driver thread updates the notion of the current relay-log
fully itself with aid of introduced
bool Relay_log_info::until_relay_log_names_defer.
An extra print out of the requested until file:pos is arranged
with --log-warning=3.
Analysis:
========
RESET MASTER TO # command deletes all binary log files listed in the index
file, resets the binary log index file to be empty, and creates a new binary
log with number #. When the user provided binary log number is greater than
the max allowed value '2147483647' server fails to generate a new binary log.
The RESET MASTER statement marks the binlog closure status as
'LOG_CLOSE_TO_BE_OPENED' and exits. Statements which follow RESET MASTER
try to write to binary log they find the log_state != LOG_CLOSED and
proceed to write to binary log cache and it results in crash.
Fix:
===
During MYSQL_BIN_LOG open, if generation of new binary log name fails then the
"log_state" needs to be marked as "LOG_CLOSED". With this further statements
will find binary log as closed and they will skip writing to the binary log.
This is a new test from upstream that did not expect the correct value
of the command slot of the Dump thread when the latter gets killed.
The test is made to expect "Killed" string as the command
in show-processlist as it is supposed to when a thread gets killed.
If the InnoDB buffer pool contains many pages for a table or index
that is being dropped or rebuilt, and if many of such pages are
pointed to by the adaptive hash index, dropping the adaptive hash index
may consume a lot of time.
The time-consuming operation of dropping the adaptive hash index entries
is being executed while the InnoDB data dictionary cache dict_sys is
exclusively locked.
It is not actually necessary to drop all adaptive hash index entries
at the time a table or index is being dropped or rebuilt. We can let
the LRU replacement policy of the buffer pool take care of this gradually.
For this to work, we must detach the dict_table_t and dict_index_t
objects from the main dict_sys cache, and once the last
adaptive hash index entry for the detached table is removed
(when the garbage page is evicted from the buffer pool) we can free
the dict_table_t and dict_index_t object.
Related to this, in MDEV-16283, we made ALTER TABLE...DISCARD TABLESPACE
skip both the buffer pool eviction and the drop of the adaptive hash index.
We shifted the burden to ALTER TABLE...IMPORT TABLESPACE or DROP TABLE.
We can remove the eviction from DROP TABLE. We must retain the eviction
in the ALTER TABLE...IMPORT TABLESPACE code path, so that in case the
discarded table is being re-imported with the same tablespace identifier,
the fresh data from the imported tablespace will replace any stale pages
in the buffer pool.
rpl.rpl_failed_drop_tbl_binlog: Remove the test. DROP TABLE can
no longer be interrupted inside InnoDB.
fseg_free_page(), fseg_free_step(), fseg_free_step_not_header(),
fseg_free_page_low(), fseg_free_extent(): Remove the parameter
that specifies whether the adaptive hash index should be dropped.
btr_search_lazy_free(): Lazily free an index when the last
reference to it is dropped from the adaptive hash index.
buf_pool_clear_hash_index(): Declare static, and move to the
same compilation unit with the bulk of the adaptive hash index
code.
dict_index_t::clone(), dict_index_t::clone_if_needed():
Clone an index that is being rebuilt while adaptive hash index
entries exist. The original index will be inserted into
dict_table_t::freed_indexes and dict_index_t::set_freed()
will be called.
dict_index_t::set_freed(), dict_index_t::freed(): Note that
or check whether the index has been freed. We will use the
impossible page number 1 to denote this condition.
dict_index_t::n_ahi_pages(): Replaces btr_search_info_get_ref_count().
dict_index_t::detach_columns(): Move the assignment n_fields=0
to ha_innobase_inplace_ctx::clear_added_indexes().
We must have access to the columns when freeing the
adaptive hash index. Note: dict_table_t::v_cols[] will remain
valid. If virtual columns are dropped or added, the table
definition will be reloaded in ha_innobase::commit_inplace_alter_table().
buf_page_mtr_lock(): Drop a stale adaptive hash index if needed.
We will also reduce the number of btr_get_search_latch() calls
and enclose some more code inside #ifdef BTR_CUR_HASH_ADAPT
in order to benefit cmake -DWITH_INNODB_AHI=OFF.
Also fixes:
MDEV-21487: Implement option for mysql_upgrade that allows root@localhost to be replaced
MDEV-21486: Implement option for mysql_install_db that allows root@localhost to be replaced
Add user mariadb.sys to be definer of user view
(and has right on underlying table global_priv for
required operation over global_priv
(SELECT,UPDATE,DELETE))
Also changed definer of gis functions in case of creation,
but they work with any definer so upgrade script do not try
to push this change.
