The tests innodb.import_tablespace_race, innodn.restart, and innodb.innodb-wl5522 move
the tablespace file between the data directory and the tmp directory specified by
global environment variables. However this is risky because it's not unusual that the
set tmp directory (often under /tmp) is mounted on another disk partition or device,
and 'move_file' command may fail with "Errcode: 18 'Invalid cross-device link.'"
For innodb.import_tablespace_race and innodb.innodb-wl5522, moving files
across directories is not necessary. Modify the tests so they rename
files under the same directory. For innodb.restart, instead of moving
between datadir and MYSQL_TMPDIR, move the files under MYSQLTEST_VARDIR.
All new code of the whole pull request, including one or several files that
are either new files or modified ones, are contributed under the BSD-new license.
I am contributing on behalf of my employer Amazon Web Services, Inc.
Before commit 6112853cda in MySQL 4.1.1
introduced the parameter innodb_file_per_table, all InnoDB data was
written to the InnoDB system tablespace (often named ibdata1).
A serious design problem is that once the system tablespace has grown to
some size, it cannot shrink even if the data inside it has been deleted.
There are also other design problems, such as the server hang MDEV-29930
that should only be possible when using innodb_file_per_table=0 and
innodb_undo_tablespaces=0 (storing both tables and undo logs in the
InnoDB system tablespace).
The parameter innodb_change_buffering was deprecated
in commit b5852ffbee.
Starting with commit baf276e6d4
(MDEV-19229) the number of innodb_undo_tablespaces can be increased,
so that the undo logs can be moved out of the system tablespace
of an existing installation.
If all these things (tables, undo logs, and the change buffer) are
removed from the InnoDB system tablespace, the only variable-size
data structure inside it is the InnoDB data dictionary.
DDL operations on .ibd files was optimized in
commit 86dc7b4d4c (MDEV-24626).
That should have removed any thinkable performance advantage of
using innodb_file_per_table=0.
Since there should be no benefit of setting innodb_file_per_table=0,
the parameter should be deprecated. Starting with MySQL 5.6 and
MariaDB Server 10.0, the default value is innodb_file_per_table=1.
It's misleading to compare and write to user number of columns and fields.
Thus, it would be better to remove that check and let use see a subsequent
error message about missing or mispaced column.
row_import::match_schema(): remove misleading check
This essentially reverts commit 4e89ec6692
and only disables InnoDB persistent statistics for tests where it is
desirable. By design, InnoDB persistent statistics will not be updated
except by ANALYZE TABLE or by STATS_AUTO_RECALC.
The internal transactions that update persistent InnoDB statistics
in background tasks (with innodb_stats_auto_recalc=ON) may cause
nondeterministic query plans or interfere with some tests that deal
with other InnoDB internals, such as the purge of transaction history.
Remove CREATE/DROP database.
Remove some unnecessary suppressions, replacements, and
SQL statements.
Populate tables via have_sequence.inc to avoid the creation of
explicit InnoDB record locks in INSERT...SELECT. This will remove
some gaps in AUTO_INCREMENT values.
This allows one to run the test suite even if any of the following
options are changed:
- character-set-server
- collation-server
- join-cache-level
- log-basename
- max-allowed-packet
- optimizer-switch
- query-cache-size and query-cache-type
- skip-name-resolve
- table-definition-cache
- table-open-cache
- Some innodb options
etc
Changes:
- Don't print out the value of system variables as one can't depend on
them to being constants.
- Don't set global variables to 'default' as the default may not
be the same as the test was started with if there was an additional
option file. Instead save original value and reset it at end of test.
- Test that depends on the latin1 character set should include
default_charset.inc or set the character set to latin1
- Test that depends on the original optimizer switch, should include
default_optimizer_switch.inc
- Test that depends on the value of a specific system variable should
set it in the test (like optimizer_use_condition_selectivity)
- Split subselect3.test into subselect3.test and subselect3.inc to
make it easier to set and reset system variables.
- Added .opt files for test that required specfic options that could
be changed by external configuration files.
- Fixed result files in rockdsb & tokudb that had not been updated for
a while.
Reason for the change was that ha_notify_table_changed() was done
after table open when .frm had been replaced, which caused failure
in engines that checks on open if .frm matches the engines table
definition.
Other changes:
- Remove not needed open/close call at end of inline alter table.
Some test that depended on the table beeing in the table cache after
ALTER TABLE had to be updated.
MariaDB data-at-rest encryption (innodb_encrypt_tables)
had repurposed the same unused data field that was repurposed
in MySQL 5.7 (and MariaDB 10.2) for the Split Sequence Number (SSN)
field of SPATIAL INDEX. Because of this, MariaDB was unable to
support encryption on SPATIAL INDEX pages.
Furthermore, InnoDB page checksums skipped some bytes, and there
are multiple variations and checksum algorithms. By default,
InnoDB accepts all variations of all algorithms that ever existed.
This unnecessarily weakens the page checksums.
We hereby introduce two more innodb_checksum_algorithm variants
(full_crc32, strict_full_crc32) that are special in a way:
When either setting is active, newly created data files will
carry a flag (fil_space_t::full_crc32()) that indicates that
all pages of the file will use a full CRC-32C checksum over the
entire page contents (excluding the bytes where the checksum
is stored, at the very end of the page). Such files will always
use that checksum, no matter what the parameter
innodb_checksum_algorithm is assigned to.
For old files, the old checksum algorithms will continue to be
used. The value strict_full_crc32 will be equivalent to strict_crc32
and the value full_crc32 will be equivalent to crc32.
ROW_FORMAT=COMPRESSED tables will only use the old format.
These tables do not support new features, such as larger
innodb_page_size or instant ADD/DROP COLUMN. They may be
deprecated in the future. We do not want an unnecessary
file format change for them.
The new full_crc32() format also cleans up the MariaDB tablespace
flags. We will reserve flags to store the page_compressed
compression algorithm, and to store the compressed payload length,
so that checksum can be computed over the compressed (and
possibly encrypted) stream and can be validated without
decrypting or decompressing the page.
In the full_crc32 format, there no longer are separate before-encryption
and after-encryption checksums for pages. The single checksum is
computed on the page contents that is written to the file.
We do not make the new algorithm the default for two reasons.
First, MariaDB 10.4.2 was a beta release, and the default values
of parameters should not change after beta. Second, we did not
yet implement the full_crc32 format for page_compressed pages.
This will be fixed in MDEV-18644.
This is joint work with Marko Mäkelä.
This is motivated by Oracle MySQL Bug #27542720 SCHEMA MISMATCH
- TABLE FLAGS DON'T MATCH, BUT FLAGS ARE NUMBERS
but using a different approach.
row_import::match_schema(): In case of a mismatch, display the
ROW_FORMAT and optionally KEY_BLOCK_SIZE of the .cfg file.
Added --skip-test-db option to mysql_install_db. If specified, no test
database created and relevant grants issued.
Removed --skip-auth-anonymous-user option of mysql_install_db. Now it is
covered by --skip-test-db.
Dropped some Debian patches that did the same.
Removed unused make_win_bin_dist.1, make_win_bin_dist and
mysql_install_db.pl.in.
Alias the InnoDB ulint and lint data types to size_t and ssize_t,
which are the standard names for the machine-word-width data types.
Correspondingly, define ULINTPF as "%zu" and introduce ULINTPFx as "%zx".
In this way, better compiler warnings for type mismatch are possible.
Furthermore, use PRIu64 for that 64-bit format, and define
the feature macro __STDC_FORMAT_MACROS to enable it on Red Hat systems.
Fix some errors in error messages, and replace some error messages
with assertions.
Most notably, an IMPORT TABLESPACE error message in InnoDB was
displaying the number of columns instead of the mismatching flags.
This is a reduced version of an originally much larger patch.
We will keep the definition of the ulint, lint data types unchanged,
and we will not be replacing fprintf() calls with ib_logf().
On Windows, use the standard format strings instead of nonstandard
extensions.
This patch fixes some errors in format strings.
Most notably, an IMPORT TABLESPACE error message in InnoDB was
displaying the number of columns instead of the mismatching flags.
to tables in the system tablespace
This is a regression caused by MDEV-11585, which accidentally
changed Tablespace::is_undo_tablespace() in an incorrect way,
causing the InnoDB system tablespace to be reported as a dedicated
undo tablespace, for which the change buffer is not applicable.
Tablespace::is_undo_tablespace(): Remove. There were only 2
calls from the function buf_page_io_complete(). Replace those
calls as appropriate.
Also, merge changes to tablespace import/export tests from
MySQL 5.7, and clean up the tests a little further, allowing
them to be run with any innodb_page_size.
Remove duplicated error injection instrumentation for the
import/export tests. In MySQL 5.7, the error injection label
buf_page_is_corrupt_failure was renamed to
buf_page_import_corrupt_failure.
fil_space_extend_must_retry(): Correct a debug assertion
(tablespaces can be extended during IMPORT), and remove a
TODO comment about compressed temporary tables that was
already addressed in MDEV-11816.
dict_build_tablespace_for_table(): Correct a comment that
no longer holds after MDEV-11816, and assert that
ROW_FORMAT=COMPRESSED can only be used in .ibd files.
innodb_file_format=Barracuda is the default in MariaDB 10.2.
Do not set it, because the option will be removed in MariaDB 10.3.
Also, do not set innodb_file_per_table=1 because it is the default.
Note that MDEV-11828 should fix the test innodb.innodb-64k
already in 10.1.
Contains also
MDEV-10547: Test multi_update_innodb fails with InnoDB 5.7
The failure happened because 5.7 has changed the signature of
the bool handler::primary_key_is_clustered() const
virtual function ("const" was added). InnoDB was using the old
signature which caused the function not to be used.
MDEV-10550: Parallel replication lock waits/deadlock handling does not work with InnoDB 5.7
Fixed mutexing problem on lock_trx_handle_wait. Note that
rpl_parallel and rpl_optimistic_parallel tests still
fail.
MDEV-10156 : Group commit tests fail on 10.2 InnoDB (branch bb-10.2-jan)
Reason: incorrect merge
MDEV-10550: Parallel replication can't sync with master in InnoDB 5.7 (branch bb-10.2-jan)
Reason: incorrect merge
Syntax. Server support. Test cases.
InnoDB bugfixes:
* don't mess around with system sprintf's, always use my_error() for errors.
* don't use InnoDB internal error codes where OS error codes are expected.
* don't say "file not found", when it was.
