This reverts commit c37b2087b4.
In c37b20887, when re-binlogging a GTID event on a replica,
it will overwrite the thread_id from the primary to be the
value of the slave applier (SQL thread or parallel worker).
This should be the value of the original thread_id on the
master connection though, to both help track temporary
tables, and be consistent with Query_log_event.
Reverting the commit to re-target 11.5, so we can re-test
with the corrected thread_id.
This patch augments Gtid_log_event with the user thread-id.
In particular that compensates for the loss of this info in
Rows_log_events.
Gtid_log_event::thread_id gets visible in mysqlbinlog output like
#231025 16:21:45 server id 1 end_log_pos 537 CRC32 0x1cf1d963 GTID 0-1-2 ddl thread_id=10
as 64 bit unsigned integer.
While the size of Gtid event has grown by 8-9 bytes
replication from OLD <-> NEW is not affected by it.
This work was started by the late Sujatha Sivakumar.
Brandon Nesterenko took it over, reviewed initial patches and extended
the work.
Reviewed-by: <andrei.elkin@mariadb.com>
Commit a923d6f49c disabled numeric setting
of character_set_* variables with non-default values:
MariaDB [(none)]> set character_set_client=224;
ERROR 1115 (42000): Unknown character set: '224'
However the corresponding binlog functionality still write numeric
values for log event, and this will break binlog replay if the value is
not default. Now make the server use 'String' type for
'character_set_client' when generating binlog events
Before:
/*!\C utf8mb4 *//*!*/;
SET @@session.character_set_client=224,@@session.collation_connection=224,@@session.collation_server=33/*!*/;
After:
/*!\C utf8mb4 *//*!*/;
SET @@session.character_set_client=utf8mb4,@@session.collation_connection=33,@@session.collation_server=8/*!*/;
Note: prior to the previous commit, setting with '224' or '45' or
'utf8mb4' have the same effect, as they all set the parameter to
'utf8mb4'.
All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer Amazon Web
Services, Inc.
There are a few different cases to consider
Logging of CREATE TABLE and CREATE TABLE ... LIKE
- If REPLACE is used and there was an existing table, DDL log the drop of
the table.
- If discovery of table is to be done
- DDL LOG create table
else
- DDL log create table (with engine type)
- create the table
- If table was created
- Log entry to binary log with xid
- Mark DDL log completed
Crash recovery:
- If query was in binary log do nothing and exit
- If discoverted table
- Delete the .frm file
-else
- Drop created table and frm file
- If table was dropped, write a DROP TABLE statement in binary log
CREATE TABLE ... SELECT required a little more work as when one is using
statement logging the query is written to the binary log before commit is
done.
This was fixed by adding a DROP TABLE to the binary log during crash
recovery if the ddl log entry was not closed. In this case the binary log
will contain:
CREATE TABLE xxx ... SELECT ....
DROP TABLE xxx;
Other things:
- Added debug_crash_here() functionality to Aria to be able to test
crash in create table between the creation of the .MAI and the .MAD files.
This allows one to run the test suite even if any of the following
options are changed:
- character-set-server
- collation-server
- join-cache-level
- log-basename
- max-allowed-packet
- optimizer-switch
- query-cache-size and query-cache-type
- skip-name-resolve
- table-definition-cache
- table-open-cache
- Some innodb options
etc
Changes:
- Don't print out the value of system variables as one can't depend on
them to being constants.
- Don't set global variables to 'default' as the default may not
be the same as the test was started with if there was an additional
option file. Instead save original value and reset it at end of test.
- Test that depends on the latin1 character set should include
default_charset.inc or set the character set to latin1
- Test that depends on the original optimizer switch, should include
default_optimizer_switch.inc
- Test that depends on the value of a specific system variable should
set it in the test (like optimizer_use_condition_selectivity)
- Split subselect3.test into subselect3.test and subselect3.inc to
make it easier to set and reset system variables.
- Added .opt files for test that required specfic options that could
be changed by external configuration files.
- Fixed result files in rockdsb & tokudb that had not been updated for
a while.
The problem was the Gtid_list event which is logged to the binlog in
10.0 and is not understood by the 5.5 server.
This event is supposed to be replaced with a dummy event for 5.5
servers. But the very first event logged in the very first binlog
has an empty list of GTID, which makes the event too short to be
replacable with an empty event.
The fix is to pad the empty Gtid_list event to be big enough to
be replacable by a dummy event.
Adjust full test suite to work with GTID.
Huge patch, mainly due to having to update .result file for all SHOW BINLOG
EVENTS and mysqlbinlog outputs, where the new GTID events pop up.
Everything was painstakingly checked to be still correct and valid .result
file updates.
main.mysqlbinlog_row_innodb are skipped by mtr
=== Problem ===
The following tests are wrongly placed in main suite and as a
result these are not run with proper binlog format combinations.
Some are always skipped by mtr.
1) mysqlbinlog_row_myisam
2) mysqlbinlog_row_innodb
3) mysqlbinlog_row.test
4) mysqlbinlog_row_trans.test
5) mysqlbinlog-cp932
6) mysqlbinlog2
7) mysqlbinlog_base64
=== Background ===
mtr runs the tests placed in main suite with binlog format=stmt.
Those that need to be tested against binlog format=row or mixed
or more than one binlog format and require only one mysql server
are placed in binlog suite. mtr runs tests in binlog suite with
all three binlog formats(stmt,row and mixed).
=== Fix ===
1) Moved the test listed in problem section above to binlog suite.
2) Added prefix "binlog_" to the name of each test case moved.
Renamed the coresponding result files and option files accordingly.
mysql-test/extra/binlog_tests/mysqlbinlog_row_engine.inc:
include file for mysqlbinlog_row_myisam.test and
mysqlbinlog_row_myisam.test which are being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog-cp932.result:
result file for mysqlbinlog-cp932.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog2.result:
result file for mysqlbinlog2.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_base64.result:
result file for mysqlbinlog_base64.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row.result:
result file for mysqlbinlog_row.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row_innodb.result:
result file for mysqlbinlog_row_innodb.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row_myisam.result:
result file for mysqlbinlog_row_myisam.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row_trans.result:
result file for mysqlbinlog_row_trans.test which is being moved to
binlog suite.
mysql-test/suite/binlog/t/binlog_mysqlbinlog-cp932-master.opt:
option file for mysqlbinlog-cp932.test which is being moved to
binlog suite.
mysql-test/suite/binlog/t/binlog_mysqlbinlog-cp932.test:
the test requires binlog format=stmt or mixed. Since, it was placed in
main suite earlier, it was only run with binlog format=stmt, and hence
this test was never run with binlog format=mixed.
mysql-test/suite/binlog/t/binlog_mysqlbinlog2.test:
the test requires binlog format=stmt or mixed. Since, it was placed in
main suite earlier, it was only run with binlog format=stmt, and hence
this test was never run with binlog format=mixed.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_base64.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row_innodb.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row_myisam.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row_trans.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
