Compute binlog checksums (when enabled) already when writing events
into the statement or transaction caches, where before it was done
when the caches are copied to the real binlog file. This moves the
checksum computation outside of holding LOCK_log, improving
scalabitily.
At stmt/trx cache write time, the final end_log_pos values are not
known, so with this patch these will be set to 0. Events that are
written directly to the binlog file (not through stmt/trx cache) keep
the correct end_log_pos value. The GTID and COMMIT/XID events at the
start and end of event groups are written directly, so the zero
end_log_pos is only for events in the middle of event groups, which
do not negatively affect replication.
An option --binlog-legacy-event-pos, off by default, is provided to
disable this behavior to provide backwards compatibility with any
external applications that might rely on end_log_pos in events in the
middle of event groups.
Checksums cannot be pre-computed when binlog encryption is enabled, as
encryption relies on correct end_log_pos to provide part of the
nonce/IV.
Checksum pre-computation is also disabled for WSREP/Galera, as it uses
events differently in its write-sets and so on. Extending pre-computation of
checksums to Galera where it makes sense could be added in a future patch.
The current --binlog-checksum configuration is saved in
binlog_cache_data at transaction start and used to pre-compute
checksums in cache, if applicable. When the cache is later copied to
the binlog, a check is made if the saved value still matches the
configured global value; if so, the events are block-copied directly
into the binlog file. If --binlog-checksum was changed during the
transaction, events are re-written to the binlog file one-by-one and
the checksums recomputed/discarded as appropriate.
Reviewed-by: Monty <monty@mariadb.org>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Adjust full test suite to work with GTID.
Huge patch, mainly due to having to update .result file for all SHOW BINLOG
EVENTS and mysqlbinlog outputs, where the new GTID events pop up.
Everything was painstakingly checked to be still correct and valid .result
file updates.
Keep track of how many pending XIDs (transactions that are prepared in
storage engine and written into binlog, but not yet durably committed
on disk in the engine) there are in each binlog.
When the count of one binlog drops to zero, write a new binlog checkpoint
event, telling which is the oldest binlog with pending XIDs.
When doing XA recovery after a crash, check the last binlog checkpoint
event, and scan all binlog files from that point onwards for XIDs that
must be committed if found in prepared state inside engine.
Remove the code in binlog rotation that waits for all prepared XIDs to
be committed before writing a new binlog file (this is no longer necessary
when recovery can scan multiple binlog files).
- Changed output to be error "error-text" instead of error - error-text
extra/perror.c:
Move my_handler_errors.h into include
include/my_handler_errors.h:
Move my_handler_errors.h into include
mysql-test/r/errors.result:
Updated result
mysql-test/r/innodb_mysql_sync.result:
Updated result
mysql-test/r/myisam-system.result:
Updated result
mysql-test/r/myisampack.result:
Updated result
mysql-test/r/partition_innodb_plugin.result:
Updated result
mysql-test/r/ps_1general.result:
Updated result
mysql-test/r/trigger.result:
Updated result
mysql-test/r/type_bit.result:
Updated result
mysql-test/r/type_bit_innodb.result:
Updated result
mysql-test/r/type_blob.result:
Updated result
mysql-test/suite/archive/archive.result:
Updated result
mysql-test/suite/binlog/r/binlog_index.result:
Updated result
mysql-test/suite/binlog/r/binlog_ioerr.result:
Updated result
mysql-test/suite/csv/csv.result:
Updated result
mysql-test/suite/engines/iuds/r/type_bit_iuds.result:
Updated result
mysql-test/suite/federated/federated_bug_35333.result:
Updated result
mysql-test/suite/innodb/r/innodb-create-options.result:
Updated result
mysql-test/suite/innodb/r/innodb-index.result:
Updated result
mysql-test/suite/innodb/r/innodb-zip.result:
Updated result
mysql-test/suite/innodb/r/innodb.result:
Updated result
mysql-test/suite/innodb/r/innodb_bug13635833.result:
Updated result
mysql-test/suite/innodb/r/innodb_bug21704.result:
Updated result
mysql-test/suite/innodb/r/innodb_bug46000.result:
Updated result
mysql-test/suite/parts/r/partition_bit_innodb.result:
Updated result
mysql-test/suite/parts/r/partition_bit_myisam.result:
Updated result
mysql-test/suite/percona/percona_innodb_fake_changes.result:
Updated result
mysql-test/suite/perfschema/r/misc.result:
Updated result
mysql-test/suite/perfschema/r/privilege.result:
Updated result
mysql-test/suite/rpl/r/rpl_EE_err.result:
Updated result
mysql-test/suite/rpl/r/rpl_binlog_errors.result:
Updated result
mysql-test/suite/rpl/r/rpl_drop_db.result:
Updated result
sql/share/errmsg-utf8.txt:
Removed 'column' from error text that was used in different context
strings/my_vsnprintf.c:
Move my_handler_errors.h into include
Minor cleanups
Changed output of %M to be error "error-text" instead of error - error-text
unittest/mysys/my_vsnprintf-t.c:
Updated error text
- Adding %M my_sprintf() modifier that prints error number - system-error-text
- Modified mysys, mysql_client and SQL error messages to use %M instead of %d
- Added my_strerror()
Updated handler errors to 5.6 error numbers
Updated text for a few error messages (to match 5.6)
Increased length of command name in error output
extra/comp_err.c:
Added support for %M
include/my_base.h:
Updated handler errors to 5.6 error numbers
include/my_sys.h:
Added my_strerror()
libmysql/errmsg.c:
Updated error messages to use %M
mysql-test/r/errors.result:
Updated result as error message have changed
mysql-test/r/innodb_mysql_sync.result:
Updated result with text for errno
mysql-test/r/myisam-system.result:
Updated result with text for errno
mysql-test/r/myisam.result:
Updated result as error message have changed
mysql-test/r/myisampack.result:
Updated result with text for errno
mysql-test/r/mysql.result:
Updated result with text for errno
mysql-test/r/mysql_upgrade.result:
Updated result with text for errno
mysql-test/r/partition_datatype.result:
Updated result as error message have changed
mysql-test/r/partition_innodb_plugin.result:
Updated result with text for errno
mysql-test/r/ps_1general.result:
Updated result with text for errno
mysql-test/r/trigger.result:
Updated result with text for errno
mysql-test/r/type_bit.result:
Updated result as error message have changed
mysql-test/r/type_bit_innodb.result:
Updated result as error message have changed
mysql-test/r/type_blob.result:
Updated result as error message have changed
mysql-test/suite/archive/archive.result:
Updated result with text for errno
mysql-test/suite/binlog/r/binlog_index.result:
Updated result with text for errno
mysql-test/suite/binlog/r/binlog_ioerr.result:
Updated result with text for errno
mysql-test/suite/csv/csv.result:
Updated result with text for errno
mysql-test/suite/federated/federated_bug_35333.result:
Updated result with text for errno
mysql-test/suite/innodb/r/innodb-create-options.result:
Updated result with text for errno
mysql-test/suite/innodb/r/innodb-index.result:
Updated result with text for errno
mysql-test/suite/innodb/r/innodb-zip.result:
Updated result as error message have changed
mysql-test/suite/innodb/r/innodb.result:
Updated result with text for errno
mysql-test/suite/innodb/r/innodb_bug21704.result:
Updated result with text for errno
mysql-test/suite/innodb/r/innodb_bug46000.result:
Updated result with text for errno
mysql-test/suite/innodb/r/innodb_bug53591.result:
Updated result as error message have changed
mysql-test/suite/innodb/r/innodb_corrupt_bit.result:
New error numbers
mysql-test/suite/innodb/r/innodb_prefix_index_liftedlimit.result:
Updated result as error message have changed
mysql-test/suite/innodb/t/innodb-create-options.test:
Added regexp to avoid system error text
mysql-test/suite/innodb/t/innodb-zip.test:
Added regexp to avoid system error text
mysql-test/suite/maria/maria-recovery2.result:
Updated supression rule
mysql-test/suite/maria/maria-recovery2.test:
Updated supression rule
mysql-test/suite/maria/maria.result:
Updated result as error message have changed
mysql-test/suite/parts/r/partition_bit_innodb.result:
Updated result as error message have changed
mysql-test/suite/parts/r/partition_bit_myisam.result:
Updated result as error message have changed
mysql-test/suite/percona/percona_innodb_fake_changes.result:
Updated result with text for errno
mysql-test/suite/perfschema/r/dml_cond_instances.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_events_waits_current.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_events_waits_history.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_events_waits_history_long.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_ews_by_instance.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_ews_by_thread_by_event_name.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_ews_global_by_event_name.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_file_instances.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_file_summary_by_event_name.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_file_summary_by_instance.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_mutex_instances.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_performance_timers.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_rwlock_instances.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/dml_threads.result:
Updated result as error message have changed
mysql-test/suite/perfschema/r/misc.result:
Updated result with text for errno
mysql-test/suite/perfschema/r/privilege.result:
Updated result with text for errno
mysql-test/suite/rpl/r/rpl_EE_err.result:
Updated result with text for errno
mysql-test/suite/rpl/r/rpl_binlog_errors.result:
Updated result with text for errno
mysql-test/suite/rpl/r/rpl_drop_db.result:
Updated result with text for errno
mysys/errors.c:
Updated error messages to use %M
Changed all errors to use Errcode: consistenly
mysys/my_handler_errors.h:
Updated handler errors to 5.6 error numbers
sql/share/errmsg-utf8.txt:
Updated error messages to use %M
sql/sys_vars.cc:
Added error number to ER_EVENT_SET_VAR_ERROR
strings/my_vsnprintf.c:
Added %M my_sprintf() modifier that prints error number - system-error-text
Simplify code
Movied common code to function
Removed some casts that was not necessary when reading integer/unsigned int stored in longlong
Added my_strerror()
unittest/mysys/my_vsnprintf-t.c:
Added testing of %M
