MTR raises default wait_for_pos_timeout from 300 to 1500 when tests
are run with valgrind. The same needs to be done for other
replication-related waits.
The change should fix one of failures mentioned in MDEV-10653
(rpl.rpl_parallel fails in buildbot with timeout), the one
on the valgrind builder; but not all of them
encryption.innodb_scrub: Clean up. Make it also cover ROW_FORMAT=COMPRESSED,
removing the need for encryption.innodb_scrub_compressed.
Add a FIXME comment saying that we should create a secondary index, to
demonstrate that also undo log pages get scrubbed. Currently that is
not working!
Also clean up encryption.innodb_scrub_background, but keep it disabled,
because the background scrubbing does not work reliably.
Fix both tests so that if something is not scrubbed, the test will be
aborted, so that the data files will be preserved. Allow the tests to
run on Windows as well.
* some of these tests run just fine with InnoDB:
-> s/have_xtradb/have_innodb/
* sys_var tests did basic tests for xtradb only variables
-> remove them, they're useless anyway (sysvar_innodb does it better)
* multi_update had innodb specific tests
-> move to multi_update_innodb.test
MTR raises default wait_for_pos_timeout from 300 to 1500 when tests
are run with valgrind. The same needs to be done for other
replication-related waits
This change is a backport from 10.0 to 5.5 for:
1. The full patch for:
MDEV-4841 Wrong character set of ADDTIME() and DATE_ADD()
9adb6e991e
2. A small fragment of:
MDEV-5298 Illegal mix of collations on timestamp
03f6778d61
which overrides Item_temporal_hybrid_func::cmp_type(),
and adds a new line into cache_temporal_4265.result.
This should be functionally equivalent to WL#6204 in MySQL 8.0.0, with
the notable difference that the file format changes are limited to
repurposing a previously unused data field in B-tree pages.
For persistent InnoDB tables, write the last used AUTO_INCREMENT
value to the root page of the clustered index, in the previously
unused (0) PAGE_MAX_TRX_ID field, now aliased as PAGE_ROOT_AUTO_INC.
Unlike some other previously unused InnoDB data fields, this one was
actually always zero-initialized, at least since MySQL 3.23.49.
The writes to PAGE_ROOT_AUTO_INC are protected by SX or X latch on the
root page. The SX latch will allow concurrent read access to the root
page. (The field PAGE_ROOT_AUTO_INC will only be read on the
first-time call to ha_innobase::open() from the SQL layer. The
PAGE_ROOT_AUTO_INC can only be updated when executing SQL, so
read/write races are not possible.)
During INSERT, the PAGE_ROOT_AUTO_INC is updated by the low-level
function btr_cur_search_to_nth_level(), adding no extra page
access. [Adaptive hash index lookup will be disabled during INSERT.]
If some rare UPDATE modifies an AUTO_INCREMENT column, the
PAGE_ROOT_AUTO_INC will be adjusted in a separate mini-transaction in
ha_innobase::update_row().
When a page is reorganized, we have to preserve the PAGE_ROOT_AUTO_INC
field.
During ALTER TABLE, the initial AUTO_INCREMENT value will be copied
from the table. ALGORITHM=COPY and online log apply in LOCK=NONE will
update PAGE_ROOT_AUTO_INC in real time.
innodb_col_no(): Determine the dict_table_t::cols[] element index
corresponding to a Field of a non-virtual column.
(The MySQL 5.7 implementation of virtual columns breaks the 1:1
relationship between Field::field_index and dict_table_t::cols[].
Virtual columns are omitted from dict_table_t::cols[]. Therefore,
we must translate the field_index of AUTO_INCREMENT columns into
an index of dict_table_t::cols[].)
Upgrade from old data files:
By default, the AUTO_INCREMENT sequence in old data files would appear
to be reset, because PAGE_MAX_TRX_ID or PAGE_ROOT_AUTO_INC would contain
the value 0 in each clustered index page. In new data files,
PAGE_ROOT_AUTO_INC can only be 0 if the table is empty or does not contain
any AUTO_INCREMENT column.
For backward compatibility, we use the old method of
SELECT MAX(auto_increment_column) for initializing the sequence.
btr_read_autoinc(): Read the AUTO_INCREMENT sequence from a new-format
data file.
btr_read_autoinc_with_fallback(): A variant of btr_read_autoinc()
that will resort to reading MAX(auto_increment_column) for data files
that did not use AUTO_INCREMENT yet. It was manually tested that during
the execution of innodb.autoinc_persist the compatibility logic is
not activated (for new files, PAGE_ROOT_AUTO_INC is never 0 in nonempty
clustered index root pages).
initialize_auto_increment(): Replaces
ha_innobase::innobase_initialize_autoinc(). This initializes
the AUTO_INCREMENT metadata. Only called from ha_innobase::open().
ha_innobase::info_low(): Do not try to lazily initialize
dict_table_t::autoinc. It must already have been initialized by
ha_innobase::open() or ha_innobase::create().
Note: The adjustments to class ha_innopart were not tested, because
the source code (native InnoDB partitioning) is not being compiled.
* remove old 5.2+ InnoDB support for virtual columns
* enable corresponding parts of the innodb-5.7 sources
* copy corresponding test cases from 5.7
* copy detailed Alter_inplace_info::HA_ALTER_FLAGS flags from 5.7
- and more detailed detection of changes in fill_alter_inplace_info()
* more "innodb compatibility hooks" in sql_class.cc to
- create/destroy/reset a THD (used by background purge threads)
- find a prelocked table by name
- open a table (from a background purge thread)
* different from 5.7:
- new service thread "thd_destructor_proxy" to make sure all THDs are
destroyed at the correct point in time during the server shutdown
- proper opening/closing of tables for vcol evaluations in
+ FK checks (use already opened prelocked tables)
+ purge threads (open the table, MDLock it, add it to tdc, close
when not needed)
- cache open tables in vc_templ
- avoid unnecessary allocations, reuse table->record[0] and table->s->default_values
- not needed in 5.7, because it overcalculates:
+ tell the server to calculate vcols for an on-going inline ADD INDEX
+ calculate vcols for correct error messages
* update other engines (mroonga/tokudb) accordingly
cannot use TABLE:merge_keys for that, because Field::part_of_key
was designed to mark fields for KEY_READ, so a field is not a
"part of key", if only prefix of the field is.
- created binlog_encryption test suite and added it to the default list
- moved some tests from rpl, binlog and multisource suites to extra
so that they could be re-used in different suites
- made minor changes in include files
A number of tests used to fail due to just not being able to
access MyRocks' I_S plugins:
cons_snapshot_repeatable_read
-drop_table3
-index_file_map
-index_key_block_size
-issue100_delete
-truncate_table3
for InnoDB tables"
Don't use thr_lock.c locks for InnoDB tables. Below is list of changes that
were needed to implement this:
- HANDLER OPEN acquireis MDL_SHARED_READ instead of MDL_SHARED
- HANDLER READ calls external_lock() even if SE is not going to be locked by
THR_LOCK
- InnoDB lock wait timeouts are now honored which are much shorter by default
than server lock wait timeouts (1 year vs 50 seconds)
- with @@autocommit= 1 LOCK TABLES disables autocommit implicitely, though
user still sees @@autocommt= 1
- the above starts implicit transaction
- transactions started by LOCK TABLES are now rolled back on disconnect
(previously everything was committed due to autocommit)
- transactions started by LOCK TABLES are now rolled back by ROLLBACK
(previously everything was committed due to autocommit)
- it is now impossible to change BINLOG_FORMAT under LOCK TABLES (at least
to statement) due to running transaction
- LOCK TABLES WRITE is additionally handled by MDL
- ...in contrast LOCK TABLES READ protection against DML is pure InnoDB
- combining transactional and non-transactional tables under LOCK TABLES
may cause rolled back changes in transactional table and "committed"
changes in non-transactional table
- user may disable innodb_table_locks, which will cause LOCK TABLES to be
noop basically
Removed tests for BUG#45143 and BUG#55930 which cover InnoDB + THR_LOCK. To
operate properly these tests require code flow to go through THR_LOCK debug
sync points, which is not the case after this patch. These tests are removed
by WL#6671 as well. An alternative is to port them to different storage engine.
- Add include/have_rocksdb.inc (TODO: is there any way to have this
file somewhere under storage/rocksdb/mysql-test ?)
- Make rocksdb.test require have_partition.inc because it uses
partitioned tables
Merge feature into 10.2 from feature branch.
Delayed replication adds an option
CHANGE MASTER TO master_delay=<seconds>
Replication will then delay applying events with that many
seconds. This creates a replication slave that reflects the state of
the master some time in the past.
Feature is ported from MySQL source tree.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Problem:
When using the delayed slave feature, and the SQL thread is delaying,
and the user issues STOP SLAVE, the event we wait for was executed.
It should not be executed.
Fix:
Check the return value from the delay function,
slave.cc:slave_sleep(). If the return value is 1, it means the thread
has been stopped, in this case we don't execute the statement.
Also, refactored the test case for delayed slave a little: added the
test script include/rpl_assert.inc, which asserts that a condition holds
and prints a message if not. Made rpl_delayed_slave.test use this. The
advantage is that the test file is much easier to read and maintain,
because it is clear what is an assertion and what is not, and also the
expected result can be found in the test file, you don't have to compare
it to the result file.
Manually merged into MariaDB from MySQL commit
fd2b210383358fe7697f201e19ac9779879ba72a
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Initial merge of delayed replication from MySQL git.
The code from the initial push into MySQL is merged, and the
associated test case passes. A number of tasks are still pending:
1. Check full test suite run for any regressions or .result file updates.
2. Extend the feature to also work for parallel replication.
3. There are some todo-comments about future refactoring left from
MySQL, these should be located and merged on top.
4. There are some later related MySQL commits, these should be checked
and merged. These include:
e134b9362ba0b750d6ac1b444780019622d14aa5
b38f0f7857c073edfcc0a64675b7f7ede04be00f
fd2b210383358fe7697f201e19ac9779879ba72a
afc397376ec50e96b2918ee64e48baf4dda0d37d
5. The testcase from MySQL relies heavily on sleep and timing for
testing, and seems likely to sporadically fail on heavily loaded test
servers in buildbot or distro build farms.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
This is similar to MysQL Worklog 3253, but with
a different implementation. The disk format and
SQL syntax is identical with MySQL 5.7.
Fetures supported:
- "Any" ammount of any trigger
- Supports FOLLOWS and PRECEDES to be
able to put triggers in a certain execution order.
Implementation details:
- Class Trigger added to hold information about a trigger.
Before this trigger information was stored in a set of lists in
Table_triggers_list and in Table_triggers_list::bodies
- Each Trigger has a next field that poinst to the next Trigger with the
same action and time.
- When accessing a trigger, we now always access all linked triggers
- The list are now only used to load and save trigger files.
- MySQL trigger test case (trigger_wl3253) added and we execute these
identically.
- Even more gracefully handling of wrong trigger files than before. This
is useful if a trigger file uses functions or syntax not provided by
the server.
- Each trigger now has a "Created" field that shows when the trigger was
created, with 2 decimals.
Other comments:
- Many of the changes in test files was done because of the new "Created"
field in the trigger file. This shows up in SHOW ... TRIGGER and when
using information_schema.trigger.
- Don't check if all memory is released if on uses --gdb; This is needed
to be able to get a list from safemalloc of not freed memory while
debugging.
- Added option to trim_whitespace() to know how many prefix characters
was skipped.
- Changed a few ulonglong sql_mode to sql_mode_t, to find some wrong usage
of sql_mode.
MDEV-10850 Wrong result for WHERE .. (f2=TO_BASE64('test') OR f2=TO_BASE64('TEST'))
Problem N1: MDEV-10425
Item_func_{md5|sha|sha2}::fix_length_and_dec() changed args[0]->collation
to force binary comparison in args[0]->eq().
It was done to treat e.g. MD5('a') and MD5('A') as different values.
It is wrong for a Item_func_xxx to modify its arguments.
Item_func_conv_charset did not expect that and crashed on assert.
Problem N2: MDEV-10850
Item_func_to_base64, Item_func_password, Item_func_hex are also case sensitive
hash functions, but they did not compare their arguments as binary.
Solution:
- Removing the code changing args[0]->collation
- Introducing Item_str_ascii_checksum_func as a common parent
for Item_func_{md5|sha|sha2|password|hex|to_base64}
and overriding its eq() method to compare arguments binary.
* remove new InnoDB-specific ER_ and HA_ERR_ codes
* renamed few old ER_ and HA_ERR_ error messages to be less MyISAM-specific
* remove duplicate enum definitions (durability_properties, icp_result)
* move new mysql-test include files to their owner suite
* rename xtradb.rdiff files to *-disabled
* remove mistakenly committed helper perl module
* remove long obsolete handler::ha_statistic_increment() method
* restore the standard C xid_t structure to not have setters and getters
* remove xid_t::reset that was cleaning too much
* move MySQL-5.7 ER_ codes where they belong
* fir innodb to include service_wsrep.h not internal wsrep headers
* update tests and results
Contains also:
MDEV-10549 mysqld: sql/handler.cc:2692: int handler::ha_index_first(uchar*): Assertion `table_share->tmp_table != NO_TMP_TABLE || m_lock_type != 2' failed. (branch bb-10.2-jan)
Unlike MySQL, InnoDB still uses THR_LOCK in MariaDB
MDEV-10548 Some of the debug sync waits do not work with InnoDB 5.7 (branch bb-10.2-jan)
enable tests that were fixed in MDEV-10549
MDEV-10548 Some of the debug sync waits do not work with InnoDB 5.7 (branch bb-10.2-jan)
fix main.innodb_mysql_sync - re-enable online alter for partitioned innodb tables
Contains also
MDEV-10547: Test multi_update_innodb fails with InnoDB 5.7
The failure happened because 5.7 has changed the signature of
the bool handler::primary_key_is_clustered() const
virtual function ("const" was added). InnoDB was using the old
signature which caused the function not to be used.
MDEV-10550: Parallel replication lock waits/deadlock handling does not work with InnoDB 5.7
Fixed mutexing problem on lock_trx_handle_wait. Note that
rpl_parallel and rpl_optimistic_parallel tests still
fail.
MDEV-10156 : Group commit tests fail on 10.2 InnoDB (branch bb-10.2-jan)
Reason: incorrect merge
MDEV-10550: Parallel replication can't sync with master in InnoDB 5.7 (branch bb-10.2-jan)
Reason: incorrect merge
