Restrict vcol_cleanup_expr() in close_thread_tables() to only simple
locked tables mode. Prelocked is cleaned up like normal statement: in
close_thread_table().
The new statistics is enabled by adding the "engine", "innodb" or "full"
option to --log-slow-verbosity
Example output:
# Pages_accessed: 184 Pages_read: 95 Pages_updated: 0 Old_rows_read: 1
# Pages_read_time: 17.0204 Engine_time: 248.1297
Page_read_time is time doing physical reads inside a storage engine.
(Writes cannot be tracked as these are usually done in the background).
Engine_time is the time spent inside the storage engine for the full
duration of the read/write/update calls. It uses the same code as
'analyze statement' for calculating the time spent.
The engine statistics is done with a generic interface that should be
easy for any engine to use. It can also easily be extended to provide
even more statistics.
Currently only InnoDB has counters for Pages_% and Undo_% status.
Engine_time works for all engines.
Implementation details:
class ha_handler_stats holds all engine stats. This class is included
in handler and THD classes.
While a query is running, all statistics is updated in the handler. In
close_thread_tables() the statistics is added to the THD.
handler::handler_stats is a pointer to where statistics should be
collected. This is set to point to handler::active_handler_stats if
stats are requested. If not, it is set to 0.
handler_stats has also an element, 'active' that is 1 if stats are
requested. This is to allow engines to avoid doing any 'if's while
updating the statistics.
Cloned or partition tables have the pointer set to the base table if
status are requested.
There is a small performance impact when using --log-slow-verbosity=engine:
- All engine calls in 'select' will be timed.
- IO calls for InnoDB reads will be timed.
- Incrementation of counters are done on local variables and accesses
are inline, so these should have very little impact.
- Statistics has to be reset for each statement for the THD and each
used handler. This is only 40 bytes, which should be neglectable.
- For partition tables we have to loop over all partitions to update
the handler_status as part of table_init(). Can be optimized in the
future to only do this is log-slow-verbosity changes. For this to work
we have to update handler_status for all opened partitions and
also for all partitions opened in the future.
Other things:
- Added options 'engine' and 'full' to log-slow-verbosity.
- Some of the new files in the test suite comes from Percona server, which
has similar status information.
- buf_page_optimistic_get(): Do not increment any counter, since we are
only validating a pointer, not performing any buf_pool.page_hash lookup.
- Added THD argument to save_explain_data_intern().
- Switched arguments for save_explain_.*_data() to have
always THD first (generates better code as other functions also have THD
first).
MDEV-30668 Set function aggregated in outer select used in view definition
This patch fixes two bugs concerning views whose specifications contain
subqueries with set functions aggregated in outer selects.
Due to the first bug those such views that have implicit grouping were
considered as mergeable. This led to wrong result sets for selects from
these views.
Due to the second bug the aggregation select was determined incorrectly and
this led to bogus error messages.
The patch added several test cases for these two bugs and for four other
duplicate bugs.
The patch also enables view-protocol for many other test cases.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
- Avoid passing real field cache as a parameter when we check for duplicates.
- Correct cache cleanup (cached field number also have to be reset).
- Name resolution cache simple test added.
This patch is the result of running
run-clang-tidy -fix -header-filter=.* -checks='-*,modernize-use-equals-default' .
Code style changes have been done on top. The result of this change
leads to the following improvements:
1. Binary size reduction.
* For a -DBUILD_CONFIG=mysql_release build, the binary size is reduced by
~400kb.
* A raw -DCMAKE_BUILD_TYPE=Release reduces the binary size by ~1.4kb.
2. Compiler can better understand the intent of the code, thus it leads
to more optimization possibilities. Additionally it enabled detecting
unused variables that had an empty default constructor but not marked
so explicitly.
Particular change required following this patch in sql/opt_range.cc
result_keys, an unused template class Bitmap now correctly issues
unused variable warnings.
Setting Bitmap template class constructor to default allows the compiler
to identify that there are no side-effects when instantiating the class.
Previously the compiler could not issue the warning as it assumed Bitmap
class (being a template) would not be performing a NO-OP for its default
constructor. This prevented the "unused variable warning".
The cause of regression was handling for ROWNUM() function.
For queries like
SELECT ROWNUM() FROM ... ORDER BY ...
ROWNUM() should be computed before the ORDER BY.
The computation was moved to be before the ORDER BY for any entries in
the select list that had RAND_TABLE_BIT set.
This had a negative impact on queries in form:
SELECT sp_func() FROM t1 ORDER BY ... LIMIT n
where sp_func() is NOT declared as DETERMINISTIC (and so has
RAND_TABLE_BIT set).
The fix is to require evaluation for sorting only for the ROWNUM()
function. Functions that just have RAND_TABLE_BIT() can be computed
after ORDER BY ... LIMIT is applied.
(think about a possible index that satisfies the ORDER BY clause. In
that case, the the rows would be read in the needed order and we would
stop after reading LIMIT rows, achieving the same effect).
Specifically:
Revert "MDEV-29664 Assertion `!n_mysql_tables_in_use' failed in innobase_close_connection"
This reverts commit ba875e9396.
Revert "MDEV-29620 Assertion `next_insert_id == 0' failed in handler::ha_external_lock"
This reverts commit aa08a7442a.
Revert "MDEV-29628 Memory leak after CREATE OR REPLACE with foreign key"
This reverts commit c579d66ba6.
Revert "MDEV-29609 create_not_windows test fails with different result"
This reverts commit cb583b2f1b.
Revert "MDEV-29544 SIGSEGV in HA_CREATE_INFO::finalize_locked_tables"
This reverts commit dcd66c3814.
Revert "MDEV-28933 CREATE OR REPLACE fails to recreate same constraint name"
This reverts commit cf6c517632.
Revert "MDEV-28933 Moved RENAME_CONSTRAINT_IDS to include/sql_funcs.h"
This reverts commit f1e1c1335b.
Revert "MDEV-28956 Locking is broken if CREATE OR REPLACE fails under LOCK TABLES"
This reverts commit a228ec80e3.
Revert "MDEV-25292 gcol.gcol_bugfixes --ps fix"
This reverts commit 24fff8267d.
Revert "MDEV-25292 Disable atomic replace for slave-generated or-replace"
This reverts commit 2af15914cb.
Revert "MDEV-25292 backup_log improved"
This reverts commit 34398a20b5.
Revert "MDEV-25292 Atomic CREATE OR REPLACE TABLE"
This reverts commit 93c8252f02.
Revert "MDEV-25292 Table_name class for (db, table_name, alias)"
This reverts commit d145dda9c7.
Revert "MDEV-25292 ha_table_exists() cleanup and improvement"
This reverts commit 409b8a86de.
Revert "MDEV-25292 Cleanups"
This reverts commit 595dad83ad.
Revert "MDEV-25292 Refactoring: moved select_field_count into Alter_info."
This reverts commit f02af1d229.
don't set vers_write=false if one vers column was used explicitly,
instead do vers_update_fields() for columns that do not have explicit
value. So, if row_start has the value and row_end not, row_end will
get max by default.
* clarify the help text for --system-versioning-insert-history
* move the vers_write=false check from Item_field::fix_fields()
next to other vers field checks in find_field_in_table()
* move row_start validation from handler::write_row() next to
vers_update_fields()
* make secure_timestamp check to happen in one place only,
extract it into a function is_set_timestamp_vorbidden().
* overwriting vers fields is an error, just like setting @@timestamp
* don't run vers_insert_history() for every row
1. system_versioning_insert_history session variable allows
pseudocolumns ROW_START and ROW_END be specified in INSERT,
INSERT..SELECT and LOAD DATA.
2. Cleaned up select_insert::send_data() from setting vers_write as
this parameter is now set on TABLE initialization.
4. Replication of system_versioning_insert_history via option_bits in
OPTIONS_WRITTEN_TO_BIN_LOG.
Underlying causes of all bugs mentioned below are same. This patch fixes
all of them:
1) MDEV-25028: ASAN use-after-poison in
base_list_iterator::next or Assertion `sl->join == 0' upon
INSERT .. RETURNING via PS
2) MDEV-25187: Assertion `inited == NONE || table->open_by_handler'
failed or Direct leak in init_dynamic_array2 upon INSERT .. RETURNING
and memory leak in init_dynamic_array2
3) MDEV-28740: crash in INSERT RETURNING subquery in prepared statements
4) MDEV-27165: crash in base_list_iterator::next
5) MDEV-29686: Assertion `slave == 0' failed in
st_select_lex_node::attach_single
Analysis:
consider this statement:
INSERT(1)...SELECT(2)...(SELECT(3)...) RETURNING (SELECT(4)...)
When RETURNING is encountered, add_slave() changes how selects are linked.
It makes the builtin_select(1) slave of SELECT(2). This causes
losing of already existing slave(3) (which is nested select of SELECT of
INSERT...SELECT). When really, builtin_select (1) shouldn't be slave to
SELECT(2) because it is not nested within it. Also, push_select() to use
correct context also changed how select are linked.
During reinit_stmt_before_use(), we expect the selects to
be cleaned-up and have join=0. Since these selects are not linked correctly,
clean-up doesn't happen correctly so join is not NULL. Hence the crash.
Fix:
IF we are parsing RETURNING, make is_parsing_returning= true for
current select. get rid of add_slave(). In place of push_select(), used
push_context() to have correct context (the context of builtin_select)
to resolve items in item_list. And add these items to item_list of
builtin_select.
The problem is that if table definition cache (TDC) is full of real tables
which are in tables cache, view definition can not stay there so will be
removed by its own underlying tables.
In situation above old mechanism of detection matching definition in PS
and current version always require reprepare and so prevent executing
the PS.
One work around is to increase TDC, other - improve version check for
views/triggers (which is done here). Now in suspicious cases we check:
- timestamp (microseconds) of the view to be sure that version really
have changed;
- time (microseconds) of creation of a trigger related to time
(microseconds) of statement preparation.
- Added missing information about database of corresponding table for various types of commands
- Update some typos
- Reviewed by: <vicentiu@mariadb.org>
Atomic CREATE OR REPLACE allows to keep an old table intact if the
command fails or during the crash. That is done through creating
a table with a temporary name and filling it with the data
(for CREATE OR REPLACE .. SELECT), then renaming the original table
to another temporary (backup) name and renaming the replacement table
to original table. The backup table is kept until the last chance of
failure and if that happens, the replacement table is thrown off and
backup recovered. When the command is complete and logged the backup
table is deleted.
Atomic replace algorithm
Two DDL chains are used for CREATE OR REPLACE:
ddl_log_state_create (C) and ddl_log_state_rm (D).
1. (C) Log CREATE_TABLE_ACTION of TMP table (drops TMP table);
2. Create new table as TMP;
3. Do everything with TMP (like insert data);
finalize_atomic_replace():
4. Link chains: (D) is executed only if (C) is closed;
5. (D) Log DROP_ACTION of BACKUP;
6. (C) Log RENAME_TABLE_ACTION from ORIG to BACKUP (replays BACKUP -> ORIG);
7. Rename ORIG to BACKUP;
8. (C) Log CREATE_TABLE_ACTION of ORIG (drops ORIG);
9. Rename TMP to ORIG;
finalize_ddl() in case of success:
10. Close (C);
11. Replay (D): BACKUP is dropped.
finalize_ddl() in case of error:
10. Close (D);
11. Replay (C):
1) ORIG is dropped (only after finalize_atomic_replace());
2) BACKUP renamed to ORIG (only after finalize_atomic_replace());
3) drop TMP.
If crash happens (C) or (D) is replayed in reverse order. (C) is
replayed if crash happens before it is closed, otherwise (D) is
replayed.
Temporary table for CREATE OR REPLACE
Before dropping "old" table, CREATE OR REPLACE creates "tmp" table.
ddl_log_state_create holds the drop of the "tmp" table. When
everything is OK (data is inserted, "tmp" is ready) ddl_log_state_rm
is written to replace "old" with "tmp". Until ddl_log_state_create
is closed ddl_log_state_rm is not executed.
After the binlogging is done ddl_log_state_create is closed. At that
point ddl_log_state_rm is executed and "tmp" is replaced with
"old". That is: final rename is done by the DDL log.
With that important role of DDL log for CREATE OR REPLACE operation
replay of ddl_log_state_rm must fail at the first hit error and
print the error message if possible. F.ex. foreign key error is
discovered at this phase: InnoDB rejects to drop the "old" table and
returns corresponding foreign key error code.
Additional notes
- CREATE TABLE without REPLACE is not affected by this commit.
- Engines having HTON_EXPENSIVE_RENAME flag set are not affected by
this commit.
- CREATE TABLE .. SELECT XID usage is fixed and now there is no need
to log DROP TABLE via DDL_CREATE_TABLE_PHASE_LOG (see comments in
do_postlock()). XID is now correctly updated so it disables
DDL_LOG_DROP_TABLE_ACTION. Note that binary log is flushed at the
final stage when the table is ready. So if we have XID in the
binary log we don't need to drop the table.
- Three variations of CREATE OR REPLACE handled:
1. CREATE OR REPLACE TABLE t1 (..);
2. CREATE OR REPLACE TABLE t1 LIKE t2;
3. CREATE OR REPLACE TABLE t1 SELECT ..;
- Test case uses 6 combinations for engines (aria, aria_notrans,
myisam, ib, lock_tables, expensive_rename) and 2 combinations for
binlog types (row, stmt). Combinations help to check differences
between the results. Error failures are tested for the above three
variations.
- expensive_rename tests CREATE OR REPLACE without atomic
replace. The effect should be the same as with the old behaviour
before this commit.
- Triggers mechanism is unaffected by this change. This is tested in
create_replace.test.
- LOCK TABLES is affected. Lock restoration must be done after "rm"
chain is replayed.
- Moved ddl_log_complete() from send_eof() to finalize_ddl(). This
checkpoint was not executed before for normal CREATE TABLE but is
executed now.
- CREATE TABLE will now rollback also if writing to the binary
logging failed. See rpl_gtid_strict.test
Rename and drop via DDL log
We replay ddl_log_state_rm to drop the old table and rename the
temporary table. In that case we must throw the correct error
message if ddl_log_revert() fails (f.ex. on FK error).
If table is deleted earlier and not via DDL log and the crash
happened, the create chain is not closed. Linked drop chain is not
executed and the new table is not installed. But the old table is
already deleted.
ddl_log.cc changes
Now we can place action before DDL_LOG_DROP_INIT_ACTION and it will
be replayed after DDL_LOG_DROP_TABLE_ACTION.
report_error parameter for ddl_log_revert() allows to fail at first
error and print the error message if possible.
ddl_log_execute_action() now can print error message.
Since we now can handle errors from ddl_log_execute_action() (in
case of non-recovery execution) unconditional setting "error= TRUE"
is wrong (it was wrong anyway because it was overwritten at the end
of the function).
On XID usage
Like with all other atomic DDL operations XID is used to avoid
inconsistency between master and slave in the case of a crash after
binary log is written and before ddl_log_state_create is closed. On
recovery XIDs are taken from binary log and corresponding DDL log
events get disabled. That is done by
ddl_log_close_binlogged_events().
On linking two chains together
Chains are executed in the ascending order of entry_pos of execute
entries. But entry_pos assignment order is undefined: it may assign
bigger number for the first chain and then smaller number for the
second chain. So the execution order in that case will be reverse:
second chain will be executed first.
To avoid that we link one chain to another. While the base chain
(ddl_log_state_create) is active the secondary chain
(ddl_log_state_rm) is not executed. That is: only one chain can be
executed in two linked chains.
The interface ddl_log_link_chains() was done in "MDEV-22166
ddl_log_write_execute_entry() extension".
More on CREATE OR REPLACE .. SELECT
We use create_and_open_tmp_table() like in ALTER TABLE to create
temporary TABLE object (tmp_table is (NON_)TRANSACTIONAL_TMP_TABLE).
After we created such TABLE object we use create_info->tmp_table()
instead of table->s->tmp_table when we need to check for
parser-requested tmp-table.
External locking is required for temporary table created by
create_and_open_tmp_table(). F.ex. that disables logging for Aria
transactional tables and without that (when no mysql_lock_tables()
is done) it cannot work correctly.
For making external lock the patch requires Aria table to work in
non-transactional mode. That is usually done by
ha_enable_transaction(false). But we cannot disable transaction
completely because: 1. binlog rollback removes pending row events
(binlog_remove_pending_rows_event()). The row events are added
during CREATE .. SELECT data insertion phase. 2. replication slave
highly depends on transaction and cannot work without it.
So we put temporary Aria table into non-transactional mode with
"thd->transaction->on hack". See comment for on_save variable.
Note that Aria table has internal_table mode. But we cannot use it
because:
if (!internal_table)
{
mysql_mutex_lock(&THR_LOCK_myisam);
old_info= test_if_reopen(name_buff);
}
For internal_table test_if_reopen() is not called and we get a new
MARIA_SHARE for each file handler. In that case duplicate errors are
missed because insert and lookup in CREATE .. SELECT is done via two
different handlers (see create_lookup_handler()).
For temporary table before dropping TABLE_SHARE by
drop_temporary_table() we must do ha_reset(). ha_reset() releases
storage share. Without that the share is kept and the second CREATE
OR REPLACE .. SELECT fails with:
HA_ERR_TABLE_EXIST (156): MyISAM table '#sql-create-b5377-4-t2' is
in use (most likely by a MERGE table). Try FLUSH TABLES.
HA_EXTRA_PREPARE_FOR_DROP also removes MYISAM_SHARE, but that is
not needed as ha_reset() does the job.
ha_reset() is usually done by
mark_tmp_table_as_free_for_reuse(). But we don't need that mechanism
for our temporary table.
Atomic_info in HA_CREATE_INFO
Many functions in CREATE TABLE pass the same parameters. These
parameters are part of table creation info and should be in
HA_CREATE_INFO (or whatever). Passing parameters via single
structure is much easier for adding new data and
refactoring.
InnoDB changes (revised by Marko Mäkelä)
row_rename_table_for_mysql(): Specify the treatment of FOREIGN KEY
constraints in a 4-valued enum parameter. In cases where FOREIGN KEY
constraints cannot exist (partitioned tables, or internal tables of
FULLTEXT INDEX), we can use the mode RENAME_IGNORE_FK.
The mod RENAME_REBUILD is for any DDL operation that rebuilds the
table inside InnoDB, such as TRUNCATE and native ALTER TABLE
(or OPTIMIZE TABLE). The mode RENAME_ALTER_COPY is used solely
during non-native ALTER TABLE in ha_innobase::rename_table().
Normal ha_innobase::rename_table() will use the mode RENAME_FK.
CREATE OR REPLACE will rename the old table (if one exists) along
with its FOREIGN KEY constraints into a temporary name. The replacement
table will be initially created with another temporary name.
Unlike in ALTER TABLE, all FOREIGN KEY constraints must be renamed
and not inherited as part of these operations, using the mode RENAME_FK.
dict_get_referenced_table(): Let the callers convert names when needed.
create_table_info_t::create_foreign_keys(): CREATE OR REPLACE creates
the replacement table with a temporary name table, so for
self-references foreign->referenced_table will be a table with
temporary name and charset conversion must be skipped for it.
Reviewed by:
Michael Widenius <monty@mariadb.org>
1. For INSERT..SELECT statements: don't include table/view the data
is inserted into in the list of leaf tables
2. Remove duplicated and dead code related to table_count
DBUG_ASSERT(0) was added by MDEV-17554 (auto-create history
partitions) as an experimental measure. Testing has shown this
conditional branch of can_recover_from_failed_open() can be possible
due to MDL deadlock.
The fix replaces DBUG_ASSERT with more specific one for
!OT_ADD_HISTORY_PARTITION.
Test case was synchronized to reproduce deadlock always and commented
with execution path of MDL locking for Good (no deadlock) and Bad
(deadlock). The logging was done with the help of preceding patch for
debug MDL tracing.
The issue was that flush_tables() didn't take a MDL lock on cached
TABLE_SHARE before calling open_table() to do a HA_EXTRA_FLUSH call.
Most engines seams to have no issue with it, but apparantly this conflicts
with InnoDB in 10.6 when using TRUNCATE
Fixed by taking a MDL lock before trying to open the table in
flush_tables().
There is no test case as it hard to repeat the scheduling that causes
the error. I did run the test case in MDEV-28897 to verify
that the bug is fixed.
