Merge

Docs/manual.texi:
  SCCS merged

Docs/manual.texi

@@ -19854,6 +19854,28 @@ still get strange errors from a table when @strong{MySQL} tries to
 update a row or find a row by key (this is VERY unlikely to happen if a
 normal check has succeeded!).
 
+Some things reported by check table, can't be corrected automaticly:
+
+@itemize @bullet
+@item
+@code{Found row where the auto_increment column has the value 0}.
+
+This means that you have in the table a row where the
+@code{auto_increment} index column contains the value 0.
+(It's possible to create a row where the auto_increment column is 0 by
+explicitely setting the column to 0 with an @code{UPDATE} statement)
+
+This isn't an error in itself, but could cause trouble if you decide to
+dump the table and restore it or do an @code{ALTER TABLE} on the
+table. In this case the auto_increment column will change value,
+according to the rules of auto_increment columns, which could cause
+problems like a duplicate key error.
+
+To get rid of the warning, just execute an @code{UPDATE} statement
+to set the column to some other value than 0.
+@end itemize
+
+
 @findex BACKUP TABLE
 @node BACKUP TABLE, RESTORE TABLE, CHECK TABLE, Reference
 @section @code{BACKUP TABLE} Syntax
@@ -21453,7 +21475,8 @@ If you have specified the update log file or a binary log file without
 an extension, the extension number of the log file will be incremented
 by one relative to the previous file.  If you have used an extension in
 the file name, @strong{MySQL} will close and reopen the update log file.
-@xref{Update log}.
+@xref{Update log}. This is the same thing as sending the @code{SIGHUP}
+signal to the @code{mysqld} server.
 
 @item @code{PRIVILEGES} @tab Reloads the privileges from the grant tables in
 the @code{mysql} database.
@@ -21464,13 +21487,16 @@ the @code{mysql} database.
 
 @item @code{TABLES WITH READ LOCK} @tab Closes all open tables and locks all tables for all databases with a read until one executes @code{UNLOCK TABLES}. This is very convenient way to get backups if you have a file system, like Veritas,that can take snapshots in time.
 
-@item @code{STATUS} @tab Resets most status variables to zero.
+@item @code{STATUS} @tab Resets most status variables to zero. This is something one should only use when debugging a query.
 @end multitable
 
 You can also access each of the commands shown above with the @code{mysqladmin}
 utility, using the @code{flush-hosts}, @code{flush-logs}, @code{reload},
 or @code{flush-tables} commands.
 
+Take also a look at the @code{RESET} command used with
+replication. @xref{Replication SQL}.
+
 @cindex @code{mysqladmin}
 @findex KILL
 @node KILL, SHOW, FLUSH, Reference
@@ -29252,14 +29278,14 @@ The following table has the options you can use for the @strong{MASTER}:
 @item @strong{Option} @tab @strong{Description}
 @item @code{log-bin=filename} @tab
 Write to a binary update log to the specified location. Note that if you
-give it a parameter with an extension
+give it a parameter with an extension (for example,
-(for example, @code{log-bin=/mysql/logs/replication.log} ) versions up to 3.23.24
+@code{log-bin=/mysql/logs/replication.log} ) versions up to 3.23.24 will
-will not work right during replication if you do @code{FLUSH LOGS} . The
+not work right during replication if you do @code{FLUSH LOGS} . The
-problem is fixed in Version 3.23.25. If you are using this kind of log name,
+problem is fixed in Version 3.23.25. If you are using this kind of log
-@code{FLUSH LOGS} will be ignored on binlog. To clear the log, run
+name, @code{FLUSH LOGS} will be ignored on binlog. To clear the log, run
 @code{FLUSH MASTER}, and do not forget to run @code{FLUSH SLAVE} on all
-slaves. In Version 3.23.26 and in later versions you should use @code{RESET MASTER}
+slaves. In Version 3.23.26 and in later versions you should use
-and @code{RESET SLAVE}
+@code{RESET MASTER} and @code{RESET SLAVE}
 
 @item @code{log-bin-index=filename} @tab
 Because the user could issue the @code{FLUSH LOGS} command, we need to
@@ -45688,6 +45714,14 @@ not yet 100% confident in this code.
 @appendixsubsec Changes in release 3.23.40
 @itemize @bullet
 @item
+Fixed that @code{DELETE FROM table_name ... LIMIT 0} and
+@code{UPDATE FROM table_name ... LIMIT 0} doesn't delete/update anything.
+@item
+@code{CHECK TABLE} now checks if an auto_increment column contains the value 0.
+@item
+Sending a @code{SIGHUP} to @code{mysqld} will now only flush the logs,
+not reset the replication.
+@item
 Fixed parser to allow floats of type @code{1.0e1} (no sign after @code{e}).
 @item
 Option @code{--force} to @code{myisamchk} now also updates states.
@@ -51131,6 +51165,9 @@ efficiently, we need to add an API to allow binding of variables.
 Make it possible to specify @code{long_query_time} with a granularity
 in microseconds.
 @item
+Add a configurable prompt to the @code{mysql} command line client, with
+options like database in use, time and date...
+@item
 Add range checking to @code{MERGE} tables.
 @item
 Link the @code{myisampack} code into the server.

configure.in

@@ -629,7 +629,10 @@ struct request_info *req;
         AC_MSG_RESULT(yes)
         AC_DEFINE(LIBWRAP)
         AC_DEFINE(HAVE_LIBWRAP)
-        WRAPLIBS="-L$with_libwrap/lib -lwrap",
+	if test "$with_libwrap" != "yes"; then
+	    WRAPLIBS="-L${with_libwrap}/lib"
+	fi
+	WRAPLIBS="${WRAPLIBS} -lwrap",
         AC_MSG_RESULT(no)
         CPPFLAGS=${_cppflags} LDFLAGS=${_ldflags}),
       CPPFLAGS=${_cppflags} LDFLAGS=${_ldflags})
@@ -798,6 +801,11 @@ case $SYSTEM_TYPE in
     echo "Adding fix for interrupted reads"
     CXXFLAGS="$CXXFLAGS -DMYSQLD_NET_RETRY_COUNT=1000000"
     ;;
+  *netbsd*)
+    echo "Adding flag -Dunix"
+    CFLAGS="$CFLAGS -Dunix"
+    CXXFLAGS="$CXXFLAGS -Dunix"
+    ;;
   *bsdi*)
     echo "Adding fix for BSDI"
     CFLAGS="$CFLAGS -D__BSD__ -DHAVE_BROKEN_REALPATH"
@@ -2043,15 +2051,15 @@ EOF
     AC_DEFINE(HAVE_mit_thread)
     MT_INCLUDES="-I\$(top_srcdir)/mit-pthreads/include"
     AC_SUBST(MT_INCLUDES)
-    MT_LD_ADD="-L \$(top_srcdir)/mit-pthreads/obj/ -lpthread"
+    MT_LD_ADD="\$(top_srcdir)/mit-pthreads/obj/libpthread.a"
     AC_SUBST(MT_LD_ADD)
-    LIBS="$MT_LD_ADD $LIBS"
     echo ""
     echo "Configuring MIT Pthreads"
     # We will never install so installation paths are not needed.
     (cd mit-pthreads; sh ./configure)
     echo "End of MIT Pthreads configuration"
     echo ""
+    LIBS="$MT_LD_ADD $LIBS"
   fi
 fi
 AC_SUBST(sql_server_dirs)

mit-pthreads/gen/ctime.c

@@ -177,7 +177,7 @@ time_t			altzone = 0;
 
 static int detzcode(const char * codep)
 {
-	long result;
+	int result;
 	int	i;
 
 	result = 0;

mit-pthreads/machdep/netbsd-1.1/__signal.h

@@ -1,5 +1,7 @@
 #include <sys/signal.h>
 
+__BEGIN_DECLS
+
 #if NSIG <= 32
 #define	__SIGEMPTYSET		0
 #define	__SIGFILLSET		0xffffffff
@@ -8,6 +10,9 @@
 #define	__SIGISMEMBER(s, n)	((*(s) & (1 << ((n) - 1))) != 0)
 
 #else	/* XXX Netbsd >= 1.3H */
+
+int	sigaction __P_((int, const struct sigaction *, struct sigaction *)) __RENAME(__sigaction14);
+
 #define	__SIGEMPTYSET		{ 0, 0, 0, 0}
 #define	__SIGFILLSET		{ 0xffffffff, 0xffffffff, \
 				  0xffffffff, 0xffffffff }
@@ -18,3 +23,5 @@
 #define	__SIGISMEMBER(s, n)	(((s)->__bits[__SIGWORD(n)] & __SIGMASK(n)) != 0)
 
 #endif
+
+__END_DECLS

mit-pthreads/stdio/strerror.c

@@ -36,13 +36,18 @@ static char sccsid[] = "@(#)strerror.c	5.6 (Berkeley) 5/4/91";
 #endif /* LIBC_SCCS and not lint */
 
 #include <string.h>
+#if defined(__NetBSD__)
+#include <errno.h>
+#endif
 
 char *
 strerror(num)
 	int num;
 {
+#if !defined(__NetBSD__)
 	extern int sys_nerr;
 	extern char *sys_errlist[];
+#endif
 #define	UPREFIX	"Unknown error: "
 	static char ebuf[40] = UPREFIX;		/* 64-bit number + slop */
 	register unsigned int errnum;
@@ -51,7 +56,7 @@ strerror(num)
 
 	errnum = num;				/* convert to unsigned */
 	if (errnum < sys_nerr)
-		return(sys_errlist[errnum]);
+		return((char *)sys_errlist[errnum]);
 
 	/* Do this by hand, so we don't include stdio(3). */
 	t = tmp;

myisam/mi_check.c

@@ -432,9 +432,9 @@ int chk_key(MI_CHECK *param, register MI_INFO *info)
     }
     else
       full_text_keys++;
-    /* Check that auto_increment key is bigger than max key value */
     if ((uint) share->base.auto_key -1 == key)
     {
+      /* Check that auto_increment key is bigger than max key value */
       ulonglong save_auto_value=info->s->state.auto_increment;
       info->s->state.auto_increment=0;
       info->lastinx=key;
@@ -454,6 +454,20 @@ int chk_key(MI_CHECK *param, register MI_INFO *info)
       }
       else
 	info->s->state.auto_increment=save_auto_value;
+
+      /* Check that there isn't a row with auto_increment = 0 in the table */
+      mi_extra(info,HA_EXTRA_KEYREAD);
+      bzero(info->lastkey,keyinfo->seg->length);
+      if (!mi_rkey(info, info->rec_buff, key, info->lastkey,
+		   keyinfo->seg->length, HA_READ_KEY_EXACT))
+      {
+	/* Don't count this as a real warning, as myisamchk can't correct it */
+	uint save=param->warning_printed;
+	mi_check_print_warning(param,
+			       "Found row where the auto_increment column has the value 0");
+	param->warning_printed=save;
+      }
+      mi_extra(info,HA_EXTRA_NO_KEYREAD);
     }
 
     length=(my_off_t) isam_key_length(info,keyinfo)*keys + param->key_blocks*2;

myisam/myisamchk.c

@@ -201,7 +201,7 @@ static struct option long_options[] =
 
 static void print_version(void)
 {
-  printf("%s  Ver 1.47 for %s at %s\n",my_progname,SYSTEM_TYPE,
+  printf("%s  Ver 1.48 for %s at %s\n",my_progname,SYSTEM_TYPE,
 	 MACHINE_TYPE);
 }
 

mysql-test/r/auto_increment.result

@@ -55,3 +55,8 @@ ordid	ord
 2	sdj
 3	sdj
 1	zzz
+a
+0
+Table	Op	Msg_type	Msg_text
+test.t1	check	warning	Found row where the auto_increment column has the value 0
+test.t1	check	status	OK

mysql-test/r/limit.result

@@ -20,3 +20,6 @@ a	b
 a	b
 2	2
 3	4
+i
+2
+1

mysql-test/t/auto_increment.test

@@ -64,3 +64,14 @@ create table t1 (ordid int(8) not null auto_increment, ord  varchar(50) not null
 insert into t1 values (NULL,'sdj'),(NULL,'sdj'),(NULL,"abc"),(NULL,'abc'),(NULL,'zzz'),(NULL,'sdj'),(NULL,'abc');
 select * from t1;
 drop table t1;
+
+#
+# Test of auto_increment columns when they are set to 0
+#
+
+create table t1 (a int not null primary key auto_increment);
+insert into t1 values (0);
+update t1 set a=0;
+select * from t1;
+check table t1;
+drop table t1;

mysql-test/t/limit.test

@@ -17,3 +17,14 @@ select * from t1;
 delete from t1 limit 1;
 select * from t1;
 drop table t1;
+
+create table t1 (i int);
+insert into t1 (i) values(1);
+insert into t1 (i) values(1);
+insert into t1 (i) values(1);
+delete from t1 limit 1;
+update t1 set i=2 limit 1;
+delete from t1 limit 0;
+update t1 set i=3 limit 0;
+select * from t1;
+drop table t1;

sql/Makefile.am

@@ -85,7 +85,7 @@ gen_lex_hash_SOURCES =	gen_lex_hash.cc
 gen_lex_hash_LDADD =	$(LDADD) $(CXXLDFLAGS)
 mysqlbinlog_SOURCES =   mysqlbinlog.cc mini_client.cc net_serv.cc \
 			mini_client_errors.c violite.c password.c
-mysqlbinlog_LDADD = $(LDADD) $(CXXLDFLAGS) $(mysqld_LDADD)
+mysqlbinlog_LDADD = $(LDADD) $(CXXLDFLAGS) # $(mysqld_LDADD)
 
 DEFS =			-DMYSQL_SERVER \
 			-DDEFAULT_MYSQL_HOME="\"$(MYSQLBASEdir)\"" \

sql/ha_gemini.cc

@@ -1,5 +1,5 @@
-/* Copyright (C) 2000 NuSphere Corporation
+/* Copyright (C) 2000 MySQL AB & NuSphere Corporation
-   
+
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
@@ -14,6 +14,7 @@
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA */
 
+/* This file is based on ha_berkeley.cc */
 
 #ifdef __GNUC__
 #pragma implementation				// gcc: Class implementation

sql/ha_gemini.h

@@ -1,4 +1,4 @@
-/* Copyright (C) 2000 NuSphere Corporation
+/* Copyright (C) 2000 MySQL AB & NuSphere Corporation
    
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by

sql/sql_delete.cc

@@ -170,12 +170,13 @@ int mysql_delete(THD *thd,TABLE_LIST *table_list,COND *conds,ha_rows limit,
   select=make_select(table,0,0,conds,&error);
   if (error)
     DBUG_RETURN(-1);
-  if (select && select->check_quick(test(thd->options & SQL_SAFE_UPDATES),
+  if ((select && select->check_quick(test(thd->options & SQL_SAFE_UPDATES),
-				    limit))
+				     limit)) || 
+      !limit)
   {
     delete select;
     send_ok(&thd->net,0L);
-    DBUG_RETURN(0);
+    DBUG_RETURN(0);				// Nothing to delete
   }
 
   /* If running in safe sql mode, don't allow updates without keys */

sql/sql_update.cc

@@ -110,7 +110,8 @@ int mysql_update(THD *thd,TABLE_LIST *table_list,List<Item> &fields,
   select=make_select(table,0,0,conds,&error);
   if (error ||
       (select && select->check_quick(test(thd->options & SQL_SAFE_UPDATES),
-				     limit)))
+				     limit)) ||
+      !limit)
   {
     delete select;
     table->time_stamp=save_time_stamp;		// Restore timestamp pointer