Updates for innobase

Removed a ' that casued 'make paper' to fail


Docs/manual.texi:
  Updated myisamchk section;  Removed a ' that casued 'make paper' to fail
sql/handler.cc:
  Updates for innobase
sql/mysqld.cc:
  Updates for innobase
sql/sql_parse.cc:
  Fixed possible overrun if the mysqld server name is too big
sql/sql_select.cc:
  Updates for innobase

Docs/manual.texi

@@ -30719,6 +30719,10 @@ of real fatal errors) as @code{myisamchk}.  On the other hand,
 flushing tables.
 @xref{OPTIMIZE TABLE, , @code{OPTIMIZE TABLE}}.
 
+Even that the repair in @code{myisamchk} is quite secure, it's always a
+good idea to make a backup BEFORE doing a repair (or anything that could
+make a lot of changes to a table)
+
 @menu
 * myisamchk syntax::            @code{myisamchk} invocation syntax
 * myisamchk memory::            @code{myisamchk} memory usage
@@ -30739,7 +30743,7 @@ described below.  (You can also get a list of options by invoking
 table.  To get more information or to tell @code{myisamchk} to take corrective
 action, specify options as described below and in the following sections.
 
-@code{tbl_name} is the database table you want to check.  If you run
+@code{tbl_name} is the database table you want to check/repair.  If you run
 @code{myisamchk} somewhere other than in the database directory, you must
 specify the path to the file, because @code{myisamchk} has no idea where your
 database is located.  Actually, @code{myisamchk} doesn't care whether or not
@@ -30775,18 +30779,19 @@ shell> myisamchk /path/to/datadir/*/*.MYI
 The recommended way to quickly check all tables is:
 
 @example
-myisamchk --fast --silent /path/to/datadir/*/*.MYI
+myisamchk --silent --fast /path/to/datadir/*/*.MYI
 isamchk --silent /path/to/datadir/*/*.ISM
 @end example
 
-@code{myisamchk} supports the following options.
+If you want to check all tables and repair all tables that are corrupted,
+you can use the following line:
 
-@menu
+@example
-* myisamchk general options::   
+myisamchk --silent --force --fast --update-state -O key_buffer=64M -O sort_buffer=64M -O read_buffer=1M -O write_buffer=1M /path/to/datadir/*/*.MYI
-* myisamchk check options::     
+isamchk --silent --force -O key_buffer=64M -O sort_buffer=64M -O read_buffer=1M -O write_buffer=1M /path/to/datadir/*/*.ISM
-* myisamchk repair options::    
+@end example
-* myisamchk other options::     
+
-@end menu
+The above assumes that you have more than 64 M free.
 
 Note that if you get an error like:
 
@@ -30804,11 +30809,20 @@ tables while you are running @code{myisamchk}.  In @strong{MySQL} Version 3.23
 the easiest way to avoid this problem is to use @code{CHECK TABLE}
 instead of @code{myisamchk} to check tables.
 
+@menu
+* myisamchk general options::   
+* myisamchk check options::     
+* myisamchk repair options::    
+* myisamchk other options::     
+@end menu
+
 @cindex options, @code{myisamchk}
 @cindex @code{myisamchk}, options
 @node myisamchk general options, myisamchk check options, myisamchk syntax, myisamchk syntax
 @subsubsection General Options for @code{myisamchk}
 
+@code{myisamchk} supports the following options.
+
 @table @code
 @item -# or --debug=debug_options
 Output debug log. The @code{debug_options} string often is
@@ -33535,26 +33549,29 @@ Here are some reasons the @code{Can't connect to local MySQL server}
 error might occur:
 
 @itemize @bullet
-@item @code{mysqld} is not running.
+@item
-@item You are running on a system that uses MIT-pthreads.
+@code{mysqld} is not running.
-If you are running on a system that doesn't have native threads, @code{mysqld}
+@item
-uses the MIT-pthreads package.
+You are running on a system that uses MIT-pthreads.
-@xref{Which OS}.
+If you are running on a system that doesn't have native threads,
-However, MIT-pthreads doesn't support Unix sockets, so on such a system you
+@code{mysqld} uses the MIT-pthreads package.  @xref{Which OS}.  However,
-must always specify the hostname explicitly when connecting to the server.
+all MIT-pthreads versions doesn't support Unix sockets. On a system
-Try using this command to check the connection to the server:
+without sockets support you must always specify the hostname explicitly
+when connecting to the server. Try using this command to check the
+connection to the server:
 @example
 shell> mysqladmin -h `hostname` version
 @end example
-@item Someone has removed the Unix socket that @code{mysqld} uses (default
+@item
-@file{/tmp/mysqld.sock}).  You might have a @code{cron} job that removes the
+Someone has removed the Unix socket that @code{mysqld} uses (default
-@strong{MySQL} socket (for example, a job that removes old files from the @file{/tmp}
+@file{/tmp/mysqld.sock}).  You might have a @code{cron} job that removes
-directory).  You can always run @code{mysqladmin version} and
+the @strong{MySQL} socket (for example, a job that removes old files
-check that the socket @code{mysqladmin} is trying to use really exists.
+from the @file{/tmp} directory).  You can always run @code{mysqladmin
-The fix in this case is to change the @code{cron} job to not remove
+version} and check that the socket @code{mysqladmin} is trying to use
-@file{mysqld.sock} or to place the socket somewhere else. You can specify
+really exists.  The fix in this case is to change the @code{cron} job to
-a different socket location at @strong{MySQL} configuration time with this
+not remove @file{mysqld.sock} or to place the socket somewhere else. You
-command:
+can specify a different socket location at @strong{MySQL} configuration
+time with this command:
 @example
 shell> ./configure --with-unix-socket-path=/path/to/socket
 @end example
@@ -33562,7 +33579,8 @@ You can also start @code{safe_mysqld} with the
 @code{--socket=/path/to/socket} option and set the environment variable
 @code{MYSQL_UNIX_PORT} to the socket pathname before starting your
 @strong{MySQL} clients.
-@item You have started the @code{mysqld} server with
+@item
+You have started the @code{mysqld} server with
 the @code{--socket=/path/to/socket} option.  If you change the socket
 pathname for the server, you must also notify the @strong{MySQL} clients
 about the new path. You can do this by setting the environment variable
@@ -33577,6 +33595,11 @@ You are using Linux and one thread has died (core dumped).  In this case
 you must kill the other @code{mysqld} threads (for example, with the
 @code{mysql_zap} script before you can start a new @strong{MySQL}
 server.  @xref{Crashing}.
+@item
+You may not have read and write privilege to either the directory that holds
+the socket file or privilege to the socket file itself. In this case you
+have to either change the privilege for the directory / file or restart
+@code{mysqld} so that it uses a directory that you can access.
 @end itemize
 
 If you get the error message @code{Can't connect to MySQL server on
@@ -33871,12 +33894,12 @@ You can check which tables you have in the current database with
 
 @cindex multibyte character sets
 @node Cannot initialize character set,  , Cannot find table, Common errors
-@subsection @code{Can't initialize character set 'xxx'} error.
+@subsection @code{Can@'t initialize character set xxx} error.
 
 If you get an error like:
 
 @example
-MySQL Connection Failed: Can't initialize character set xx
+MySQL Connection Failed: Can't initialize character set xxx
 @end example
 
 This means one of the following things:

sql/handler.cc

@@ -178,7 +178,7 @@ void ha_close_connection(THD* thd)
 {
 #ifdef HAVE_INNOBASE_DB
   if (!innobase_skip)
-    innobase_close_connection(THD* thd);
+    innobase_close_connection(thd);
 #endif
 }
 
@@ -236,7 +236,6 @@ int ha_commit_trans(THD *thd, THD_TRANS* trans)
       my_error(ER_ERROR_DURING_COMMIT, MYF(0), error);
       error=1;
     }
-    trans->innobase_tid=0;
   }
 #endif
   if (error && trans == &thd->transaction.all && mysql_bin_log.is_open())
@@ -263,12 +262,11 @@ int ha_rollback_trans(THD *thd, THD_TRANS *trans)
 #ifdef HAVE_INNOBASE_DB
   if (trans->innobase_tid)
   {
-    if ((error=innobase_rollback(thd)))
+    if ((error=innobase_rollback(thd, trans->innobase_tid)))
     {
       my_error(ER_ERROR_DURING_ROLLBACK, MYF(0), error);
       error=1;
     }
-    trans->innobase_tid=0;
   }
 #endif
 #ifdef USING_TRANSACTIONS

sql/mysqld.cc

@@ -2576,7 +2576,7 @@ CHANGEABLE_VAR changeable_vars[] = {
   {"innobase_mirrored_log_groups",
    (long*) &innobase_mirrored_log_groups, 1, 1, 10, 0, 1},
   {"innobase_log_files_in_group",
-     (long*) &innobase_mirrored_log_groups, 2, 2, 100, 0, 1},
+     (long*) &innobase_log_files_in_group, 2, 2, 100, 0, 1},
   {"innobase_log_file_size",
      (long*) &innobase_log_file_size, 5*1024*1024L, 1*1024*1024L,
      ~0L, 0, 1024*1024L},
@@ -2591,6 +2591,9 @@ CHANGEABLE_VAR changeable_vars[] = {
      ~0L, 0, 1024},
   {"innobase_file_io_threads",
      (long*) &innobase_file_io_threads, 9, 4, 64, 0, 1},
+  {"innobase_lock_wait_timeout",
+     (long*) &innobase_lock_wait_timeout, 1024 * 1024 * 1024, 1,
+						1024 * 1024 * 1024, 0, 1},
 #endif
   { "interactive_timeout",     (long*) &net_interactive_timeout,
       NET_WAIT_TIMEOUT, 1, 31*24*60*60, 0, 1 },
@@ -3463,13 +3466,13 @@ static void get_options(int argc,char **argv)
     case OPT_GEMINI_SKIP:
 #ifdef HAVE_GEMINI_DB
       gemini_skip=1;
-      have_gemini_db=SHOW_OPTION_DISABLED;  
+      have_gemini=SHOW_OPTION_DISABLED;  
 #endif
       break;
     case OPT_INNOBASE_SKIP:
 #ifdef HAVE_INNOBASE_DB
       innobase_skip=1;
-      have_innobase_db=SHOW_HAVE_DISABLED;
+      have_innobase=SHOW_OPTION_DISABLED;
 #endif
       break;
 #ifdef HAVE_INNOBASE_DB

sql/sql_parse.cc

@@ -209,7 +209,8 @@ check_connections(THD *thd)
   /* nasty, but any other way? */
   uint pkt_len = 0;
   {
-    char buff[60],*end;
+    /* buff[] needs to big enough to hold the server_version variable */
+    char buff[SERVER_VERSION_LENGTH + SCRAMBLE_LENGTH+32],*end;
     int client_flags = CLIENT_LONG_FLAG | CLIENT_CONNECT_WITH_DB |
 	               CLIENT_TRANSACTIONS;
     LINT_INIT(pkt_len);

sql/sql_select.cc

@@ -475,6 +475,26 @@ mysql_select(THD *thd,TABLE_LIST *tables,List<Item> &fields,COND *conds,
 
   make_join_readinfo(&join,
 		     (select_options & SELECT_DESCRIBE) | SELECT_USE_CACHE);
+
+  /* Need to tell Innobase that to play it safe, it should fetch all
+     columns of the tables: this is because MySQL
+     may build row pointers for the rows, and for all columns of the primary
+     key the field->query_id has not necessarily been set to thd->query_id
+     by MySQL. */
+
+#ifdef HAVE_INNOBASE_DB
+  if (need_tmp || select_distinct || group || order)
+  {
+    for (uint i_h = join.const_tables; i_h < join.tables; i_h++)
+    {
+      JOIN_TAB*   tab_h = join.join_tab + i_h;
+      TABLE*	  table_h = tab_h->table;
+      if (table_h->db_type == DB_TYPE_INNOBASE)
+	table_h->file->extra(HA_EXTRA_RESTORE_POS);
+    }
+  }
+#endif
+
   DBUG_EXECUTE("info",TEST_join(&join););
   /*
     Because filesort always does a full table scan or a quick range scan