Fix typos in mysql-test/

mysql-test/include/check-testcase.inc

@@ -3,8 +3,8 @@
 # This test is executed twice for each test case. Before every
 # testcase it is run with mysqltest in record mode and will thus
 # produce an output file that can be compared to output from after the
-# tescase.  In that way, it is possible to check that a testcase does
+# testcase. In that way, it is possible to check that a testcase does
-# not have any unwanted side affects.
+# not have any unwanted side effects..
 
 --disable_query_log
 

mysql-test/include/common-tests.inc

@@ -1524,7 +1524,7 @@ INSERT INTO t4 (companynr, companyname) VALUES (00,'Unknown');
 --enable_query_log
 
 #
-# Test of stright join to force a full join.
+# Test of straight join to force a full join.
 #
 
 select STRAIGHT_JOIN t2.companynr,companyname from t4,t2 where t2.companynr=t4.companynr group by t2.companynr;
@@ -1592,7 +1592,7 @@ explain select distinct t2.companynr,t4.companynr from t2,t4 where t2.companynr=
 SET @@join_cache_level=@local_join_cache_level;
 
 #
-# Search using 'or' with the same referens group.
+# Search using 'or' with the same reference group.
 # An interval search will be done first with the first table and after that
 # the other table is referenced with a key with a 'test if key in use' for
 # each record

mysql-test/include/concurrent.inc

@@ -454,7 +454,7 @@ drop table t1;
       --echo ** Table will be unchanged and the select command will not be
       --echo ** blocked:
       select * from t1;
-      --echo ** Commit transacton on thread 2.
+      --echo ** Commit transaction on thread 2.
       commit;
 
   connection thread1;
@@ -500,7 +500,7 @@ drop table t1;
       send delete from t1 where tipo=2;
 # The sleep has not been replaced as all tried wait conditions leaded to sporadically
 # succeding update in the following thread. Also the used status variables '%lock%' and
-# 'innodb_deleted_rows' and infos in processlist where not sucessful.
+# 'innodb_deleted_rows' and infos in processlist were not successful.
       sleep 1;
 
   connection thread1;
@@ -555,7 +555,7 @@ drop table t1;
       send delete from t1 where tipo=2;
 # The sleep has not been replaced as all tried wait conditions leaded to sporadically
 # succeding update in the following thread. Also the used status variables '%lock%' and
-# 'innodb_deleted_rows' and infos in processlist where not sucessful.
+# 'innodb_deleted_rows' and infos in processlist were not successful.
       sleep 1;
  --disable_view_protocol
   connection thread1;

mysql-test/include/ctype_unescape.inc

@@ -39,7 +39,7 @@ if ($ctype_unescape_combinations == 'selected')
 --source include/bytes.inc
 #
 # Populate "selected_bytes" with bytes that have a special meaning.
-# We'll use "selected_bytes" to generate byte seqeunces,
+# We'll use "selected_bytes" to generate byte sequences,
 # instead of the full possible byte combinations, to reduce test time.
 #
 CREATE TABLE selected_bytes (a VARBINARY(10));

mysql-test/include/default_mysqld.cnf

@@ -96,7 +96,7 @@ loose-performance-schema-max-thread-instances=400
 loose-performance-schema-session-connect-attrs-size=2048
 loose-performance-schema-max-metadata-locks=10000
 
-# Enable everything, for maximun code exposure during testing
+# Enable everything, for maximum code exposure during testing
 
 loose-performance-schema-instrument='%=ON'
 

mysql-test/include/execute_with_statistics.inc

@@ -2,12 +2,12 @@
 #
 # SUMMARY
 #
-#    Explain and execute the select statment in $query.
+#    Explain and execute the select statement in $query.
 #    Then report 'Last_query_cost' estimate from the query
 #    optimizer and total number of 'Handler_read%' when the
 #    query was executed.
-#    Intended usage is to verify that there are not regressions
+#    Intended usage is to verify that there are no regressions
-#    in either calculated or actuall cost for $query.
+#    in either calculated or actual cost for $query.
 #
 # USAGE
 #

mysql-test/include/index_merge_ror.inc

@@ -199,7 +199,7 @@ select key1,key2,key3,key4,filler1 from t1 where key3=200 or (key1=100 and key2=
 explain select * from t1 where st_a=1 and st_b=1;
 explain select st_a,st_b from t1 where st_a=1 and st_b=1;
 
-# Check if "ingore index" syntax works
+# Check if "ignore index" syntax works
 explain select st_a from t1 ignore index (st_a) where st_a=1 and st_b=1;
 
 # Do many tests

mysql-test/include/mix2.inc

@@ -902,7 +902,7 @@ DROP TABLE t1,t2,t3;
 
 eval CREATE TABLE t1 (a int not null primary key, b int not null, unique (b)) engine=$engine_type;
 INSERT INTO t1 values (1,1),(2,2),(3,3),(4,4),(5,5),(6,6),(7,7),(8,8),(9,9);
-# We need the a < 1000 test here to quard against the halloween problems
+# We need the a < 1000 test here to guard against the halloween problems
 UPDATE t1 set a=a+100 where b between 2 and 3 and a < 1000;
 SELECT * from t1;
 drop table t1;
@@ -1035,7 +1035,7 @@ drop table t1;
 if ($test_foreign_keys)
 {
 #
-# Test dictionary handling with spaceand quoting
+# Test dictionary handling with space and quoting
 #
 
 eval CREATE TABLE t1 (`id 1` INT NOT NULL, PRIMARY KEY (`id 1`)) ENGINE=$engine_type;

mysql-test/include/plugin.defs

@@ -17,7 +17,7 @@
 # The PLUGVAR variable is not quoted, so you must remember to quote it
 # when using it in an INSTALL PLUGIN command.
 #
-# The envorinment variables can be used in tests. If adding a new plugin,
+# The environment variables can be used in tests. If adding a new plugin,
 # you are free to pick your variable name, but please keep it upper
 # case for consistency.
 #

mysql-test/include/sync_io_with_master.inc

@@ -2,7 +2,7 @@
 #
 # Waits until the slave IO thread on the current connection has been
 # synced up to the point saved by the last call to
-# include/save_master_pos.inc (i.e., until the IO thead has copied up
+# include/save_master_pos.inc (i.e., until the IO thread has been copied
 # to the saved position).  Does not wait for the SQL thread.
 #
 #

mysql-test/lib/My/Config.pm

@@ -301,7 +301,7 @@ sub new {
 
       # Check that the file exists relative to path of first config file
       if (! -f $include_file_name){
-	# Try to include file relativ to current dir
+	# Try to include file relative to current dir
 	$include_file_name= $1;
       }
       croak "The include file '$include_file_name' does not exist"

mysql-test/lib/My/ConfigFactory.pm

@@ -63,7 +63,7 @@ sub get_testdir {
   return $testdir;
 }
 
-# Retrive build directory (which is different from basedir in out-of-source build)
+# Retrieve build directory (which is different from basedir in out-of-source build)
 sub get_bindir {
   if (defined $ENV{MTR_BINDIR})
   {

mysql-test/lib/My/CoreDump.pm

@@ -352,7 +352,7 @@ sub _cdb {
   my $image_path= join(";", (keys %dirhash),".");
 
   # For better callstacks, setup _NT_SYMBOL_PATH to include
-  # OS symbols. Note : Dowloading symbols for the first time 
+  # OS symbols. Note : Downloading symbols for the first time
   # can take some minutes
   if (!$ENV{'_NT_SYMBOL_PATH'})
   {
@@ -382,7 +382,7 @@ sub _cdb {
   return unless $cdb_output;
   
   # Remove comments (lines starting with *), stack pointer and frame 
-  # pointer adresses and offsets to function to make output better readable
+  # pointer addresses and offsets to function to make output better readable
   $cdb_output=~ s/^\*.*\n//gm;   
   $cdb_output=~ s/^([\:0-9a-fA-F\`]+ )+//gm; 
   $cdb_output=~ s/^ChildEBP RetAddr//gm;

mysql-test/lib/My/Platform.pm

@@ -168,7 +168,7 @@ sub check_socket_path_length {
        Local => $testfile,
        Listen => 1,
       );
-    $truncated= 1; # Be negatvie
+    $truncated= 1; # Be negative
 
     die "Could not create UNIX domain socket: $!"
       unless defined $sock;

mysql-test/lib/My/SafeProcess.pm

@@ -196,7 +196,7 @@ sub new {
   my $proc= bless
     ({
       SAFE_PID  => $pid,
-      SAFE_WINPID  => $pid, # Inidicates this is always a real process
+      SAFE_WINPID  => $pid, # Indicates this is always a real process
       SAFE_NAME => $name,
       SAFE_SHUTDOWN => $shutdown,
       PARENT => $$,
@@ -539,7 +539,7 @@ sub wait_any_timeout {
 
   do {
     ::mtr_milli_sleep($millis);
-    # Slowly increse interval up to max. 1 second
+    # Slowly increase interval up to max. 1 second
     $millis++ if $millis < 1000;
     # Return a "fake" process for timeout
     if (::has_expired($timeout)) {

mysql-test/lib/My/SafeProcess/Base.pm

@@ -160,7 +160,7 @@ sub create_process {
       die "create_process failed: $^E";
     }
 
-    # Retore IO redirects
+    # Restore IO redirects
     open STDERR, '>&', $olderr
       or croak("unable to reestablish STDERR");
     open STDOUT, '>&', $oldout

mysql-test/lib/My/SafeProcess/safe_process.cc

@@ -201,7 +201,7 @@ extern "C" void handle_signal(int sig)
   signal(SIGINT,  SIG_IGN);
   signal(SIGHUP, SIG_IGN);
 
-  // Continune execution, allow the child to be started and
+  // Continue execution, allow the child to be started and
   // finally terminated by monitor loop
 }
 

mysql-test/lib/My/SafeProcess/safe_process_win.cc

@@ -310,10 +310,10 @@ int main(int argc, const char** argv )
     terminated when the last handle to it is closed(which is owned by
     this process).
 
-    If breakaway from job fails on some reason, fallback is to create a
+    If breakaway from job fails for some reason, fallback is to create a
     new process group. Process groups also allow to kill process and its 
-    descedants, subject to some restrictions (processes have to run within
+    descendants, subject to some restrictions (processes have to run within
-    the same console,and must not ignore CTRL_BREAK)
+    the same console, and must not ignore CTRL_BREAK)
   */
   DWORD create_flags[]= {CREATE_BREAKAWAY_FROM_JOB, CREATE_NEW_PROCESS_GROUP, 0};
   BOOL process_created= FALSE;

mysql-test/lib/My/SysInfo.pm

@@ -185,7 +185,7 @@ sub isvm {
 }
 
 
-# Prit the cpuinfo
+# Print the cpuinfo
 sub print_info {
   my ($self)= @_;
 

mysql-test/lib/mtr_cases.pm

@@ -84,7 +84,7 @@ sub init_pattern {
   return undef unless defined $from;
   if ( $from =~ /^[a-z0-9\.]*$/ ) {
     # Does not contain any regex (except . that we allow as
-    # separator betwen suite and testname), make the pattern match
+    # separator between suite and testname), make the pattern match
     # beginning of string
     $from= "^$from";
     mtr_verbose2("$what='$from'");
@@ -184,7 +184,7 @@ sub collect_test_cases ($$$$) {
       #
       # Collect the criteria for sorting, in order of importance.
       # Note that criteria are also used in mysql-test-run.pl to
-      # schedule tests to workers, and it preferres tests that have
+      # schedule tests to workers, and it prefers tests that have
       # *identical* criteria. That is, test name is *not* part of
       # the criteria, but it's part of the sorting function below.
       #
@@ -487,7 +487,7 @@ sub process_suite {
 					     $suitedir));
 
   #
-  # Read suite config files, unless it was done aleady
+  # Read suite config files, unless it was done already
   #
   unless (defined $suite->{name}) {
     $suite->{name} = $suitename;

mysql-test/lib/v1/mtr_cases.pl

@@ -115,9 +115,8 @@ sub collect_test_cases ($) {
     {
       my @criteria = ();
 
-      # Look for tests that muct be in run in a defined order
+      # Look for tests that must be run in an order defined by
-      # that is defined by test having the same name except for
+      # test having the same name except for the ending digit
-      # the ending digit
 
       # Put variables into hash
       my $test_name= $tinfo->{'name'};
@@ -180,7 +179,7 @@ sub collect_test_cases ($) {
 
 }
 
-# Valid extensions and their corresonding component id
+# Valid extensions and their corresponding component id
 my %exts = ( 'test' => 'mysqld',
 	     'imtest' => 'im'
 	   );
@@ -274,7 +273,7 @@ sub collect_one_suite($)
       #print "  tname:      $tname\n";
       #print "  extension:  $extension\n";
 
-      # Check cirrect suite if suitename is defined
+      # Check correct suite if suitename is defined
       next if (defined $sname and $suite ne $sname);
 
       my $component_id;

mysql-test/lib/v1/mtr_process.pl

@@ -386,10 +386,10 @@ sub mtr_kill_leftovers () {
   # We now have tried to terminate nice. We have waited for the listen
   # port to be free, but can't really tell if the mysqld process died
   # or not. We now try to find the process PID from the PID file, and
-  # send a kill to that process. Note that Perl let kill(0,@pids) be
+  # send a kill to that process. Note that Perl lets kill(0,@pids) be
-  # a way to just return the numer of processes the kernel can send
+  # a way to just return the number of processes the kernel can send
   # signals to. So this can be used (except on Cygwin) to determine
-  # if there are processes left running that we cound out might exists.
+  # if there are processes left running that we count out might exists.
   #
   # But still after all this work, all we know is that we have
   # the ports free.
@@ -618,7 +618,7 @@ sub mtr_check_stop_servers ($) {
 	if ($::glob_win32_perl and $srv->{'real_pid'})
 	{
 	  # Wait for the pseudo pid - if the real_pid was known
-	  # the pseudo pid has not been waited for yet, wai blocking
+	  # the pseudo pid has not been waited for yet, wait blocking
 	  # since it's "such a simple program"
 	  mtr_verbose("Wait for pseudo process $srv->{'pid'}");
 	  my $ret_pid= waitpid($srv->{'pid'}, 0);
@@ -844,8 +844,8 @@ sub mtr_record_dead_children () {
   my $process_died= 0;
   my $ret_pid;
 
-  # Wait without blockinng to see if any processes had died
+  # Wait without blocking to see if any processes had died
-  # -1 or 0 means there are no more procesess to wait for
+  # -1 or 0 means there are no more processes to wait for
   while ( ($ret_pid= waitpid(-1,&WNOHANG)) != 0 and $ret_pid != -1)
   {
     mtr_warning("mtr_record_dead_children: $ret_pid");

mysql-test/lib/v1/mtr_report.pl

@@ -347,7 +347,7 @@ sub mtr_report_stats ($) {
                 /Stored routine 'test'.'bug14233_3': invalid value in column mysql.proc/ or
 
                 # BUG#29839 - lowercase_table3.test: Cannot find table test/T1
-                #             from the internal data dictiona
+                #             from the internal data dictionary
                 /Cannot find table test\/BUG29839 from the internal data dictionary/ or
                 # BUG#32080 - Excessive warnings on Solaris: setrlimit could not
                 #             change the size of core files

mysql-test/lib/v1/mysql-test-run.pl

@@ -31,8 +31,8 @@
 #
 # Coding style directions for this perl script
 #
-#   - To make this Perl script easy to alter even for those that not
+#   - To make this Perl script easy to alter even for those that do not
-#     code Perl that often, keeep the coding style as close as possible to
+#     code Perl that often, keep the coding style as close as possible to
 #     the C/C++ MySQL coding standard.
 #
 #   - All lists of arguments to send to commands are Perl lists/arrays,
@@ -926,7 +926,7 @@ sub command_line_setup () {
   }
 
   # --------------------------------------------------------------------------
-  # ps protcol flag
+  # ps protocol flag
   # --------------------------------------------------------------------------
   if ( $opt_ps_protocol )
   {
@@ -1571,8 +1571,8 @@ sub environment_setup () {
   }
 
   # --------------------------------------------------------------------------
-  # Valgrind need to be run with debug libraries otherwise it's almost
+  # Valgrind needs to be run with debug libraries otherwise it's almost
-  # impossible to add correct supressions, that means if "/usr/lib/debug"
+  # impossible to add correct suppressions, that means if "/usr/lib/debug"
   # is available, it should be added to
   # LD_LIBRARY_PATH
   #
@@ -1668,7 +1668,7 @@ sub environment_setup () {
   $ENV{'MYSQL_CHECK'}=              $cmdline_mysqlcheck;
 
   # ----------------------------------------------------
-  # Setup env to childs can execute myqldump
+  # Setup env to childs can execute mysqldump
   # ----------------------------------------------------
   my $cmdline_mysqldump= generate_cmdline_mysqldump($master->[0]);
   my $cmdline_mysqldumpslave= generate_cmdline_mysqldump($slave->[0]);
@@ -2411,7 +2411,7 @@ sub mysql_install_db () {
     copy_install_db('master', $master->[1]->{'path_myddir'});
   }
 
-  # Install the number of slave databses needed
+  # Install the number of slave databases needed
   for (my $idx= 0; $idx < $max_slave_num; $idx++)
   {
     copy_install_db("slave".($idx+1), $slave->[$idx]->{'path_myddir'});
@@ -3083,7 +3083,7 @@ sub mysqld_arguments ($$$$) {
 
   if (!$opt_extern and $mysql_version_id >= 50106 )
   {
-    # Turn on logging to bothe tables and file
+    # Turn on logging to both tables and file
     mtr_add_arg($args, "%s--log-output=table,file", $prefix);
   }
 

mysql-test/main/alter_table-big.test

@@ -1,5 +1,5 @@
 #
-# Tests for various concurrency-related aspects of ALTER TABLE implemetation
+# Tests for various concurrency-related aspects of ALTER TABLE implementation
 #
 # This test takes rather long time so let us run it only in --big-test mode
 --source include/big_test.inc

mysql-test/main/alter_table.result

@@ -1220,7 +1220,7 @@ info: Records: 2  Duplicates: 0  Warnings: 0
 ALTER TABLE t1 MODIFY COLUMN a SET('a1','a2','a0','xx','a5','a6');
 affected rows: 0
 info: Records: 0  Duplicates: 0  Warnings: 0
-# Copy: Numerical incrase (pack lenght)
+# Copy: Numerical increase (pack length)
 ALTER TABLE t1 MODIFY COLUMN a SET('a1','a2','a0','xx','a5','a6','a7','a8','a9','a10');
 affected rows: 2
 info: Records: 2  Duplicates: 0  Warnings: 0

mysql-test/main/alter_table.test

@@ -1053,7 +1053,7 @@ ALTER TABLE t1 MODIFY COLUMN a SET('a1','a2','xx');
 ALTER TABLE t1 MODIFY COLUMN a SET('a1','a2','a0','xx');
 --echo # No copy: Add new to the end
 ALTER TABLE t1 MODIFY COLUMN a SET('a1','a2','a0','xx','a5','a6');
---echo # Copy: Numerical incrase (pack lenght)
+--echo # Copy: Numerical increase (pack length)
 ALTER TABLE t1 MODIFY COLUMN a SET('a1','a2','a0','xx','a5','a6','a7','a8','a9','a10');
 --disable_info
 DROP TABLE t1;

mysql-test/main/analyze_format_json.test

@@ -338,7 +338,7 @@ between 400 and 450;
 # r_rows_idx=2 (average 4 (1+3)/2 scans = 2 rows per scan)
 # r_icp_filtered=50 (4 rows total, 2 survive the icp, both in the second scan)
 # for t13.a=1, 0 rows after ICP
-# for t13.a=2, 2 rows after ICP, 1 survives the rowid_filter (t12.c bewteen 400 and 500)
+# for t13.a=2, 2 rows after ICP, 1 survives the rowid_filter (t12.c between 400 and 500)
 # rowid_filter r_lookups=2 (2 / 2 loops)
 # rowid_filter r_selectivity_pct = 50 (1 survived / 2 rows after ICP)
 --source include/analyze-format.inc

mysql-test/main/auto_increment.test

@@ -171,7 +171,7 @@ select * from t1 order by b;
 drop table t1;
 
 #
-# Test of behavior of ALTER TABLE when coulmn containing NULL or zeroes is
+# Test of behavior of ALTER TABLE when column containing NULL or zeroes is
 # converted to AUTO_INCREMENT column
 #
 create table t1 (a bigint);

mysql-test/main/bigint.test

@@ -407,7 +407,7 @@ SELECT * FROM t1 WHERE coalesce(a) BETWEEN 0 and 0.9;
 SELECT * FROM t1 WHERE coalesce(a)=0.9;
 SELECT * FROM t1 WHERE coalesce(a) in (0.8,0.9);
 
-# b. These queries mistakenely returned 1 row:
+# b. These queries mistakenly returned 1 row:
 SELECT * FROM t1 WHERE a BETWEEN 0 AND 0.9;
 SELECT * FROM t1 WHERE a=0.9;
 SELECT * FROM t1 WHERE a IN (0.8,0.9);

mysql-test/main/case.test

@@ -88,7 +88,7 @@ CASE _latin1'a' WHEN _latin1'A' COLLATE latin1_bin        THEN '1' ELSE 2 END as
 ;
 
 #
-# COALESCE is a CASE abbrevation:
+# COALESCE is a CASE abbreviation:
 #
 # COALESCE(v1,v2) == CASE WHEN v1 IS NOT NULL THEN v1 ELSE v2 END
 #

mysql-test/main/column_compression.test

@@ -346,7 +346,7 @@ DELIMITER ;$$
 
 
 # Let's override the default threshold (100) to force
-# comression for VARCHAR1+MB, for example, for:
+# compression for VARCHAR1+MB, for example, for:
 # VARCHAR(80) CHARACTER SET utf8mb3
 
 SET @@column_compression_threshold=32;

mysql-test/main/comments.result

@@ -71,7 +71,7 @@ SELECT 1 /*!190000 +1*/;
 1
 1
 #
-# Tesing that versions >= 5.7.x and < 10.0.0 are not ignored 
+# Testing that versions >= 5.7.x and < 10.0.0 are not ignored
 # when used with the MariaDB executable comment syntax.
 #
 SELECT 1 /*M!50699 +1*/;

mysql-test/main/comments.test

@@ -45,7 +45,7 @@ SELECT 1 /*!210000 +1*/;
 SELECT 1 /*!190000 +1*/;
 
 --echo #
---echo # Tesing that versions >= 5.7.x and < 10.0.0 are not ignored 
+--echo # Testing that versions >= 5.7.x and < 10.0.0 are not ignored
 --echo # when used with the MariaDB executable comment syntax.
 --echo #
 SELECT 1 /*M!50699 +1*/;

mysql-test/main/commit.test

@@ -154,7 +154,7 @@ COMMIT;
 
 #
 # Verify isolation level with @completion_type=1.
-# (A @@completion_type value of 1 is equivalentl to 
+# (A @@completion_type value of 1 is equivalent to
 # explicitly adding "AND CHAIN" to COMMIT or ROLLBACK)
 #
 
@@ -278,7 +278,7 @@ COMMIT;
 #
 # Verify that a transaction ended with an
 # implicit commit (i.e a DDL statement), the
-# @@completetion_type setting is ignored, and
+# @@completion_type setting is ignored, and
 # the next transaction's isolation level is
 # the session level.
 #

mysql-test/main/compare.test

@@ -1,5 +1,5 @@
 #
-# Bug when using comparions of strings and integers.
+# Bug when using comparisons of strings and integers.
 #
 
 --disable_warnings

mysql-test/main/concurrent_innodb_safelog.result

@@ -593,7 +593,7 @@ eta	tipo	c
 70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
 80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
 90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
-** Commit transacton on thread 2.
+** Commit transaction on thread 2.
 commit;
 connection thread1;
 ** Commit transaction on thread 1.

mysql-test/main/concurrent_innodb_unsafelog.result

@@ -593,7 +593,7 @@ eta	tipo	c
 70	1	iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
 80	22	jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
 90	11	kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
-** Commit transacton on thread 2.
+** Commit transaction on thread 2.
 commit;
 connection thread1;
 ** Commit transaction on thread 1.

mysql-test/main/costs.result

@@ -32,7 +32,7 @@ id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra
 1	SIMPLE	t1	range	PRIMARY	PRIMARY	4	NULL	11	Using where; Using index
 Last_query_cost	0.002747
 #
-# Shorter indexes are prefered over longer indexs
+# Shorter indexes are preferred over longer indexes
 #
 explain select sum(a+b) from t1;
 id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra

mysql-test/main/costs.test

@@ -34,7 +34,7 @@ explain select count(*) from t1 where a > 2;
 --source include/last_query_cost.inc
 
 --echo #
---echo # Shorter indexes are prefered over longer indexs
+--echo # Shorter indexes are preferred over longer indexes
 --echo #
 explain select sum(a+b) from t1;
 --source include/last_query_cost.inc

mysql-test/main/create-big.test

@@ -15,7 +15,7 @@
 # Save the initial number of concurrent sessions.
 --source include/count_sessions.inc
 
-# Create auxilliary connections
+# Create auxiliary connections
 connect (addconroot1, localhost, root,,);
 connect (addconroot2, localhost, root,,);
 connect (addconroot3, localhost, root,,);

mysql-test/main/create.test

@@ -741,7 +741,7 @@ drop table t1;
 # Error during open_and_lock_tables() of tables
 --error ER_NO_SUCH_TABLE
 create table t1 select * from t2;
-# A special case which is also caught during open tables pahse
+# A special case which is also caught during open tables phase
 --error ER_NO_SUCH_TABLE
 create table t1 select * from t1;
 # Error which happens before select_create::prepare()
@@ -771,12 +771,12 @@ drop table t1;
 --error ER_CANT_AGGREGATE_2COLLATIONS
 create table t1 select coalesce('a' collate latin1_swedish_ci,'b' collate latin1_bin);
 
-# Base vs temporary tables dillema (a.k.a. bug#24508 "Inconsistent
+# Base vs temporary tables dilemma (a.k.a. bug#24508 "Inconsistent
 # results of CREATE TABLE ... SELECT when temporary table exists").
 # In this situation we either have to create non-temporary table and
 # insert data in it or insert data in temporary table without creation of
 # permanent table. After patch for Bug#47418, we create the base table and
-# instert data into it, even though a temporary table exists with the same
+# insert data into it, even though a temporary table exists with the same
 # name.
 --disable_view_protocol
 create temporary table t1 (j int);

mysql-test/main/create_drop_db.test

@@ -1,4 +1,4 @@
-# Enable diisplaying rows affected
+# Enable displaying rows affected
 --enable_info
 
 CREATE DATABASE IF NOT EXISTS db1;

mysql-test/main/create_w_max_indexes_64.test

@@ -5,7 +5,7 @@
 #
 # Problem with creating keys with maximum key-parts and maximum name length
 # This test is made for a mysql server supporting names up to 64 bytes
-# and a maximum of 16 key segements per Key
+# and a maximum of 16 key segments per Key
 #
 
 create table t1 (

mysql-test/main/cset_narrowing.result

@@ -393,7 +393,7 @@ EXPLAIN
 #
 # Check multiple equalities
 #
-# - ref acccess lookup keys do use equality substitution,
+# - ref access lookup keys do use equality substitution,
 # - concat() arguments don't
 explain format=json
 select straight_join * from t10,t1 force index(mb3),t2

mysql-test/main/cset_narrowing.test

@@ -130,7 +130,7 @@ select * from t10, t2 where t2.mb4>t10.mb4 and t10.pk=3;
 --echo # Check multiple equalities
 --echo #
 
---echo # - ref acccess lookup keys do use equality substitution,
+--echo # - ref access lookup keys do use equality substitution,
 --echo # - concat() arguments don't
 #Enable after fix MDEV-32034
 --disable_view_protocol

mysql-test/main/cte_nonrecursive.result

@@ -56,7 +56,7 @@ where t2.c=t.a;
 id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra
 1	SIMPLE	t2	ALL	NULL	NULL	NULL	NULL	4	
 1	SIMPLE	t1	ALL	NULL	NULL	NULL	NULL	8	Using where; Using join buffer (flat, BNL join)
-# rename fields returned by the specication when defining t
+# rename fields returned by the specification when defining t
 with t(f1,f2) as (select * from t1 where b >= 'c') 
 select * from t2,t where t2.c=t.f1;
 c	f1	f2
@@ -94,7 +94,7 @@ id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra
 1	PRIMARY	t2	ALL	NULL	NULL	NULL	NULL	4	Using where
 1	PRIMARY	<derived2>	ref	key0	key0	5	test.t2.c	1	
 2	DERIVED	t1	ALL	NULL	NULL	NULL	NULL	8	Using where; Using temporary; Using filesort
-# specivication of t contains having
+# specification of t contains having
 with t as (select a, count(*) from t1 where b >= 'c'
              group by a having count(*)=1 ) 
 select * from t2,t where t2.c=t.a;

mysql-test/main/cte_nonrecursive.test

@@ -33,7 +33,7 @@ explain
 select * from t2, (select * from t1 where b >= 'c') as t
    where t2.c=t.a;
 
---echo # rename fields returned by the specication when defining t
+--echo # rename fields returned by the specification when defining t
 with t(f1,f2) as (select * from t1 where b >= 'c') 
   select * from t2,t where t2.c=t.f1;
 explain
@@ -52,7 +52,7 @@ explain
 select * from t2, (select a, count(*) from t1 where b >= 'c' group by a) as t 
   where t2.c=t.a;
 
---echo # specivication of t contains having
+--echo # specification of t contains having
 with t as (select a, count(*) from t1 where b >= 'c'
              group by a having count(*)=1 ) 
  select * from t2,t where t2.c=t.a; 

mysql-test/main/cte_recursive.test

@@ -3645,7 +3645,7 @@ select * from cte;
 # one non-recursive CTEs with name x uses table t1, the second CTE x is
 # recursive and is in the scope of the first one, but does not use it;
 # CTE cte uses only the second CTE with name x;
-# the query has two refeences to cte_e
+# the query has two references to cte_e
 # before fix of this bug: infinite sequence of recursive calls
 
 with
@@ -3678,7 +3678,7 @@ cte_e as
 select s1.*, s2.*  from cte_e as s1, cte_e as s2;
 
 
-# check : with base table x all queries abobe that returned error
+# check : with base table x all queries above that returned error
 # message ER_NO_SUCH_TABLE now return proper result sets
 
 with

mysql-test/main/ctype_latin1.test

@@ -97,7 +97,7 @@ SET collation_connection='latin1_bin';
 # Bug#8041
 # An unknown character (e.g. 0x84) should result in ERROR,
 # It was treated like a space character earlier.
-# Howerver, it should still work fine as a string part.
+# However, it should still work fine as a string part.
 --error 1064
 CREATE TABLE <20>a (a int);
 SELECT '<27>a' as str;

mysql-test/main/ctype_recoding.test

@@ -117,7 +117,7 @@ DROP TABLE t1;
 
 
 #
-# Test that we allow only well-formed UTF8 identitiers
+# Test that we allow only well-formed UTF8 identifiers
 #
 SET NAMES binary;
 --error 1300
@@ -128,7 +128,7 @@ CREATE TABLE `good
 
 
 #
-# Test that we produce a warnign when conversion loses data.
+# Test that we produce a warning when conversion loses data.
 #
 set names latin1;
 create table t1 (a char(10) character set koi8r, b text character set koi8r);
@@ -150,7 +150,7 @@ insert into t1 values (_koi8r'
 select * from t1 where a=_koi8r'<27><><EFBFBD><EFBFBD>';
 # this is possible, because we have a function with constant arguments:
 select * from t1 where a=concat(_koi8r'<27><><EFBFBD><EFBFBD>');
-# this is not posible, cannot convert _latin1'<27><><EFBFBD><EFBFBD>' into cp1251:
+# this is not possible, cannot convert _latin1'<27><><EFBFBD><EFBFBD>' into cp1251:
 --error 1267
 select * from t1 where a=_latin1'<27><><EFBFBD><EFBFBD>';
 drop table t1;

mysql-test/main/ctype_utf16.test

@@ -683,7 +683,7 @@ show create table t1;
 drop table t1;
 
 #
-# Testing that maximim possible key length is 1000 bytes
+# Testing that maximum possible key length is 1000 bytes
 #
 create table t1 (a varchar(250) character set utf16 primary key);
 show create table t1;

mysql-test/main/ctype_utf16le.result

@@ -1559,7 +1559,7 @@ t1	CREATE TABLE `t1` (
 ) ENGINE=MyISAM DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_uca1400_ai_ci
 DROP TABLE t1;
 #
-# Testing that maximim possible key length is 1000 bytes
+# Testing that maximum possible key length is 1000 bytes
 #
 CREATE TABLE t1 (a VARCHAR(250) CHARACTER SET utf16le PRIMARY KEY);
 SHOW CREATE TABLE t1;

mysql-test/main/ctype_utf16le.test

@@ -648,7 +648,7 @@ DROP TABLE t1;
 
 
 --echo #
---echo # Testing that maximim possible key length is 1000 bytes
+--echo # Testing that maximum possible key length is 1000 bytes
 --echo #
 CREATE TABLE t1 (a VARCHAR(250) CHARACTER SET utf16le PRIMARY KEY);
 SHOW CREATE TABLE t1;

mysql-test/main/ctype_utf32.result

@@ -998,7 +998,7 @@ Wrong character with pad
 insert ignore into t1 values (0x110000);
 Warnings:
 Warning	1366	Incorrect string value: '\x11\x00\x00' for column `test`.`t1`.`utf32` at row 1
-Wrong chsaracter without pad
+Wrong character without pad
 insert ignore into t1 values (0x00110000);
 Warnings:
 Warning	1366	Incorrect string value: '\x00\x11\x00\x00' for column `test`.`t1`.`utf32` at row 1

mysql-test/main/ctype_utf32.test

@@ -600,7 +600,7 @@ drop table t1;
 create table t1 (utf32 varchar(2) character set utf32);
 --echo Wrong character with pad
 insert ignore into t1 values (0x110000);
---echo Wrong chsaracter without pad
+--echo Wrong character without pad
 insert ignore into t1 values (0x00110000);
 --echo Wrong character with pad followed by another wrong character
 insert ignore into t1 values (0x11000000110000);
@@ -724,7 +724,7 @@ show create table t1;
 drop table t1;
 
 #
-# Testing that maximim possible key length is 1332 bytes
+# Testing that maximum possible key length is 1332 bytes
 #
 create table t1 (a varchar(250) character set utf32 primary key);
 show create table t1;

mysql-test/main/ctype_utf8.test

@@ -2003,7 +2003,7 @@ DROP PROCEDURE p1;
 SET @@SQL_MODE=default;
 
 
-# TODO: Uncomment the below test whe we fix:
+# TODO: Uncomment the below test when we fix it:
 # MDEV-9623INFORMATION_SCHEMA.ROUTINES.ROUTINE_DEFINITION does not handle binary literals well
 #
 #SET NAMES binary;

mysql-test/main/custom_aggregate_functions.test

@@ -478,7 +478,7 @@ select val, id, c from (select f1(sal) as c from t2) as t1, t2;
 --sorted_result
 select f1(sal),f1(val), f1(id), f1(sal) from t2;
 
-#string type, also more than one areguments
+#string type, also more than one argument
 --sorted_result
 select f4(sal, val) from t1;
 

mysql-test/main/custom_aggregates_i_s.result

@@ -69,7 +69,7 @@ id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra
 show  status like "%custom_aggregate%";
 Variable_name	Value
 Feature_custom_aggregate_functions	5
-custom aggregates inside other customm aggregates
+custom aggregates inside other custom aggregates
 explain
 select f2(sal) from t1;
 id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra

mysql-test/main/custom_aggregates_i_s.test

@@ -61,7 +61,7 @@ explain
 select (select f1(sal) as a from t3 where t3.id= t1.id )  from t1 ;
 show  status like "%custom_aggregate%";
 
---echo custom aggregates inside other customm aggregates
+--echo custom aggregates inside other custom aggregates
 
 explain
 select f2(sal) from t1;

mysql-test/main/default.result

@@ -437,7 +437,7 @@ ERROR 01000: Expression for field `a` is referring to uninitialized field `b`
 show create table t1;
 ERROR 42S02: Table 'test.t1' doesn't exist
 #
-# Refering to other columns
+# Referring to other columns
 #
 create or replace table t1 (a int default 1, b int default a);
 create or replace table t1 (a int default 1, b int as (a));
@@ -3219,7 +3219,7 @@ a	b
 6	7
 drop table t1;
 #
-# DEVAULT & PS adoption
+# DEFAULT & PS adoption
 #
 CREATE TABLE t1 (a INT DEFAULT 10, b INT DEFAULT NULL);
 EXECUTE IMMEDIATE 'INSERT INTO t1 VALUES (?,?)' USING IGNORE, IGNORE;

mysql-test/main/default.test

@@ -320,7 +320,7 @@ create or replace table t1 (a int default b, b int default a);
 show create table t1;
 
 --echo #
---echo # Refering to other columns
+--echo # Referring to other columns
 --echo #
 
 create or replace table t1 (a int default 1, b int default a);
@@ -1923,7 +1923,7 @@ INSERT INTO t2 VALUES (1),(2),(3),(2);
 INSERT INTO t1 SELECT a FROM t2 ON DUPLICATE KEY UPDATE a=DEFAULT;
 SELECT * FROM t1 order by a;
 truncate table t1;
-# efectively it is DEFALT
+# effectively it is DEFAULT
 INSERT INTO t1 SELECT a FROM t2 ON DUPLICATE KEY UPDATE a=IGNORE;
 SELECT * FROM t1 order by a;
 DROP TABLE t1,t2;
@@ -1949,7 +1949,7 @@ select * from t1 order by a;
 drop table t1;
 
 --echo #
---echo # DEVAULT & PS adoption
+--echo # DEFAULT & PS adoption
 --echo #
 
 

mysql-test/main/delete.result

@@ -697,7 +697,7 @@ DELETE t2.* FROM t2 use index(xid) ORDER BY (id) DESC LIMIT 3;
 select * from t2;
 id
 3
-# Check some useles syntax
+# Check some useless syntax
 DELETE t2.* FROM t2 FORCE INDEX FOR GROUP BY (xid) ORDER BY (id) LIMIT 1;
 drop table t2;
 # Check that hints work with limit
@@ -770,7 +770,7 @@ explain
 DELETE FROM t2 ignore index(primary) ORDER BY (id) LIMIT 2;
 id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra
 1	SIMPLE	t2	index	NULL	xid	4	NULL	2	
-# should issue warnings becaouse we can not switch it internally
+# should issue warnings because we can not switch it internally
 # to multiupdate due to RETURNING
 DELETE FROM t2 ignore index(primary) ORDER BY (id) LIMIT 2 RETURNING id;
 id

mysql-test/main/delete.test

@@ -758,7 +758,7 @@ DELETE t2.* FROM t2 use index(xid) ORDER BY (id) LIMIT 2;
 select * from t2 ORDER BY (id);
 DELETE t2.* FROM t2 use index(xid) ORDER BY (id) DESC LIMIT 3;
 select * from t2;
---echo # Check some useles syntax
+--echo # Check some useless syntax
 DELETE t2.* FROM t2 FORCE INDEX FOR GROUP BY (xid) ORDER BY (id) LIMIT 1;
 
 drop table t2;
@@ -819,7 +819,7 @@ DELETE FROM t2 force index(xid) ORDER BY (id) LIMIT 2;
 explain
 DELETE FROM t2 ignore index(primary) ORDER BY (id) LIMIT 2;
 
---echo # should issue warnings becaouse we can not switch it internally
+--echo # should issue warnings because we can not switch it internally
 --echo # to multiupdate due to RETURNING
 DELETE FROM t2 ignore index(primary) ORDER BY (id) LIMIT 2 RETURNING id;
 

mysql-test/main/delete_use_source.result

@@ -10,7 +10,7 @@ Table	Op	Msg_type	Msg_text
 test.t1	analyze	status	Engine-independent statistics collected
 test.t1	analyze	status	OK
 #
-# Delete with limit (quick select - range acces)
+# Delete with limit (quick select - range access)
 #
 start transaction;
 delete from t1 where (select count(*) from t1 b where b.c1=t1.c1) = 500 limit 1;

mysql-test/main/delete_use_source.test

@@ -13,7 +13,7 @@ insert t1 select 3,seq from seq_1_to_20;
 analyze table t1;
 
 --echo #
---echo # Delete with limit (quick select - range acces)
+--echo # Delete with limit (quick select - range access)
 --echo #
 
 --disable_view_protocol

mysql-test/main/derived_split_innodb.test

@@ -552,7 +552,7 @@ eval $tvc_conversion_threshold EXPLAIN $query;
 let $no_split_materialized_loosescan=
   set statement optimizer_switch='split_materialized=off, loosescan=off' for;
 
-# Correct result with split materializied optimization disabled
+# Correct result with split materialized optimization disabled
 eval $no_split_materialized_loosescan
   $tvc_conversion_threshold
   $query;

mysql-test/main/distinct.test

@@ -587,7 +587,7 @@ DROP TABLE t1;
 SET @old_max_heap_table_size = @@max_heap_table_size;
 SET @@max_heap_table_size = 16384;
 
-# Set sort_buffer_size to the mininum value so that remove_duplicates() calls
+# Set sort_buffer_size to the minimum value so that remove_duplicates() calls
 # remove_dup_with_compare()
 SET @old_sort_buffer_size = @@sort_buffer_size;
 SET @@sort_buffer_size = 32804;

mysql-test/main/drop_table_force.test

@@ -2,11 +2,11 @@
 --source include/have_innodb.inc
 --source include/have_archive.inc
 #
-# This test is based on the orginal test from Tencent for DROP TABLE ... FORCE
+# This test is based on the original test from Tencent for DROP TABLE ... FORCE
 # In MariaDB we did reuse the code but MariaDB does not require the FORCE
 # keyword to drop a table even if the .frm file or some engine files are
 # missing.
-# To make it easy to see the differences between the orginal code and
+# To make it easy to see the differences between the original code and
 # the new one, we have left some references to the original test case
 #
 

mysql-test/main/failed_auth_3909.test

@@ -3,7 +3,7 @@ source include/not_embedded.inc;
 #
 # MDEV-3909 remote user enumeration
 #
-# verify that for some failed login attemps (with wrong user names)
+# verify that for some failed login attempts (with wrong user names)
 # the server requests a plugin
 #
 create user foo identified via mysql_old_password;

mysql-test/main/flush.test

@@ -103,7 +103,7 @@ drop table t1, t2, t3;
 #
 # Test of deadlock problem when doing FLUSH TABLE with read lock
 # (Bug was in NTPL threads in Linux when using different mutex while
-#  waiting for a condtion variable)
+#  waiting for a condition variable)
 
 create table t1 (c1 int);
 create table t2 (c1 int);

mysql-test/main/flush_read_lock.result

@@ -23,8 +23,8 @@ set local sql_mode="";
 # ALTER TABLE, ANALYZE, OPTIMIZE and some others always
 # issue an implicit commit, even if its argument is a
 # temporary table. 
-# *Howewer* an implicit commit is a no-op if all engines
+# *However* an implicit commit is a no-op if all engines
-# used since the start of transactiona are non-
+# used since the start of transaction are non-
 # transactional. Thus, for non-transactional engines,
 # these operations are not blocked by FTWRL.
 # This is class #3 -- compatible because do not take
@@ -1463,7 +1463,7 @@ set debug_sync= "RESET";
 #       such changes are considered read only [sic!/QQ] this commit
 #       is compatible with FTWRL.
 #
-#       Let us demostrate this fact for some common DML statements.
+#       Let us demonstrate this fact for some common DML statements.
 Success: Was able to run 'delete from t3_temp_trans' under FTWRL.
 Success: Was able to run 'delete from t3_temp_trans' with FTWRL active in another connection.
 Success: Was able to run FTWRL while 'delete from t3_temp_trans' was active in another connection.
@@ -1654,7 +1654,7 @@ set debug_sync= "RESET";
 delete from t1_base;
 delete from t2_base;
 
-# Check that COMMIT thas is issued after
+# Check that COMMIT that is issued after
 # FLUSH TABLES WITH READ LOCK is not blocked by
 # FLUSH TABLES WITH READ LOCK from another connection.
 # This scenario is used in innobackup.pl. The COMMIT goes

mysql-test/main/flush_read_lock.test

@@ -38,8 +38,8 @@ set local sql_mode="";
 --echo # ALTER TABLE, ANALYZE, OPTIMIZE and some others always
 --echo # issue an implicit commit, even if its argument is a
 --echo # temporary table. 
---echo # *Howewer* an implicit commit is a no-op if all engines
+--echo # *However* an implicit commit is a no-op if all engines
---echo # used since the start of transactiona are non-
+--echo # used since the start of transaction are non-
 --echo # transactional. Thus, for non-transactional engines,
 --echo # these operations are not blocked by FTWRL.
 --echo # This is class #3 -- compatible because do not take
@@ -1802,7 +1802,7 @@ set debug_sync= "RESET";
 --echo #       such changes are considered read only [sic!/QQ] this commit
 --echo #       is compatible with FTWRL.
 --echo #
---echo #       Let us demostrate this fact for some common DML statements.
+--echo #       Let us demonstrate this fact for some common DML statements.
 let $statement= delete from t3_temp_trans;
 let $cleanup_stmt= ;
 --source include/check_ftwrl_compatible.inc
@@ -2031,7 +2031,7 @@ delete from t1_base;
 delete from t2_base;
 
 --echo 
---echo # Check that COMMIT thas is issued after
+--echo # Check that COMMIT that is issued after
 --echo # FLUSH TABLES WITH READ LOCK is not blocked by
 --echo # FLUSH TABLES WITH READ LOCK from another connection.
 --echo # This scenario is used in innobackup.pl. The COMMIT goes

mysql-test/main/flush_ssl.test

@@ -55,7 +55,7 @@ SELECT VARIABLE_NAME NAME, VARIABLE_VALUE VALUE FROM INFORMATION_SCHEMA.GLOBAL_S
 --echo # Cleanup
 remove_file $ssl_cert;
 remove_file $ssl_key;
-# restart with usuall SSL
+# restart with usual SSL
 let $restart_parameters=;
 --source include/kill_mysqld.inc
 --source include/start_mysqld.inc

mysql-test/main/func_encrypt_nossl.test

@@ -2,7 +2,7 @@
 
 #
 # Test output from des_encrypt and des_decrypt when server is
-# compiled without openssl suuport
+# compiled without openssl support
 #
 select des_encrypt("test", 'akeystr');
 select des_encrypt("test", 1);

mysql-test/main/func_group.result

@@ -1516,7 +1516,7 @@ ORDER BY max;
 id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra
 1	SIMPLE	t1	ALL	NULL	NULL	NULL	NULL	3	
 
-# Only 11 is correct for collumn i in this result
+# Only 11 is correct for column i in this result
 SELECT MAX(pk) as max, i
 FROM t1
 WHERE pk<2

mysql-test/main/func_group.test

@@ -435,7 +435,7 @@ drop table t1;
 
 
 #
-# cleunup() of optimized away count(*) and max/min
+# cleanup() of optimized away count(*) and max/min
 #
 create table t1 (a int);
 insert into t1 values (1),(2);
@@ -1055,7 +1055,7 @@ FROM t1
 ORDER BY max;
 
 --echo
---echo # Only 11 is correct for collumn i in this result
+--echo # Only 11 is correct for column i in this result
 SELECT MAX(pk) as max, i
 FROM t1
 WHERE pk<2

mysql-test/main/func_hybrid_type.result

@@ -4245,7 +4245,7 @@ ERROR HY000: Illegal parameter data types bigint unsigned and row for operation
 SELECT (b+b)=ROW(1,1) FROM t1;
 ERROR HY000: Illegal parameter data types bigint and row for operation '='
 DROP TABLE t1;
-# Opetator + for different types integer types, with the UNSIGNED flag
+# Operator + for different types integer types, with the UNSIGNED flag
 CREATE TABLE t1 (a1 TINYINT UNSIGNED, a2 SMALLINT UNSIGNED);
 SELECT (a1+a2)=ROW(1,1) FROM t1;
 ERROR HY000: Illegal parameter data types int unsigned and row for operation '='

mysql-test/main/func_hybrid_type.test

@@ -1023,7 +1023,7 @@ SELECT (b+b)=ROW(1,1) FROM t1;
 DROP TABLE t1;
 
 
---echo # Opetator + for different types integer types, with the UNSIGNED flag
+--echo # Operator + for different types integer types, with the UNSIGNED flag
 
 CREATE TABLE t1 (a1 TINYINT UNSIGNED, a2 SMALLINT UNSIGNED);
 --error ER_ILLEGAL_PARAMETER_DATA_TYPES2_FOR_OPERATION

mysql-test/main/func_json.result

@@ -3987,7 +3987,7 @@ JSON_SCHEMA_VALID(@object_schema, '{"key1":"val1", "key2": 10, "I_int":20, "S_":
 SELECT JSON_SCHEMA_VALID(@object_schema, '{"key1":"val1", "key2": 10, "I_int":[1,2,3], "S_":[1,2,3], "some_prop1":[1,2,3]}');
 JSON_SCHEMA_VALID(@object_schema, '{"key1":"val1", "key2": 10, "I_int":[1,2,3], "S_":[1,2,3], "some_prop1":[1,2,3]}')
 1
-# Remvoing additionalProperties to check that validation falls back on unevaluatedProperties
+# Removing additionalProperties to check that validation falls back on unevaluatedProperties
 SET @object_schema= '{
                        "type":"object",
                        "properties": {

mysql-test/main/func_json.test

@@ -3053,7 +3053,7 @@ SET @object_schema= '{
 SELECT JSON_SCHEMA_VALID(@object_schema, '{"key1":"val1", "key2": 10, "I_int":20, "S_":"abc", "some_prop1":[1,2,3]}');
 SELECT JSON_SCHEMA_VALID(@object_schema, '{"key1":"val1", "key2": 10, "I_int":[1,2,3], "S_":[1,2,3], "some_prop1":[1,2,3]}');
 
---echo # Remvoing additionalProperties to check that validation falls back on unevaluatedProperties
+--echo # Removing additionalProperties to check that validation falls back on unevaluatedProperties
 
 SET @object_schema= '{
                        "type":"object",

mysql-test/main/func_regexp_pcre.result

@@ -846,7 +846,7 @@ Warning	1139	Regex error 'UTF-8 error: 1 byte missing at end'
 0xE001 REGEXP CAST(@regCheck AS CHAR)
 0
 Warnings:
-Warning	1139	Regex error 'UTF-8 error: 1 byte missing at end'
+Warning	1139	Regex error 'UTF-8 error: 1 byte missing at end'
 # Since 11.5 (MDEV-25829) user variables have DERIVATION_COERCIBLE
 # so a user variable and a literal in the pattern gave equal results
 # But since 11.6 (MDEV-35041) user variables have DERIVATION_USERVAR
@@ -870,7 +870,7 @@ SET @regCheck= _binary '\\xE0\\x01';
 1
 # Testing workaround N2: This also makes the pattern to be a binary string, using a different syntax:
 SET NAMES latin1;
-SET @regCheck= _binary '\\xE0\\x01';
+SET @regCheck= _binary '\\xE0\\x01';
 SELECT 0xE001 REGEXP @regCheck;
 0xE001 REGEXP @regCheck
 1

mysql-test/main/func_regexp_pcre.test

@@ -196,7 +196,7 @@ SELECT REGEXP_REPLACE('a5b ab a5b','(?<=a)5*(?=b)','x');
 SELECT REGEXP_REPLACE('a5b a5b a5b','(?<=a)5*(?=b)','x');
 
 
-# Check that case sensitiviry respects the collation
+# Check that case sensitivity respects the collation
 SELECT REGEXP_REPLACE('A','a','b');
 SELECT REGEXP_REPLACE('a','A','b');
 SELECT REGEXP_REPLACE('A' COLLATE utf8_bin,'a','b');
@@ -423,7 +423,7 @@ SELECT 0xE001 REGEXP CAST(@regCheck AS CHAR);
 --echo # Since 11.5 (MDEV-25829) user variables have DERIVATION_COERCIBLE
 --echo # so a user variable and a literal in the pattern gave equal results
 --echo # But since 11.6 (MDEV-35041) user variables have DERIVATION_USERVAR
---echo # so the query with a literal is performece as binary:
+--echo # so the query with a literal is performed as binary:
 SELECT 0xE001 REGEXP '\\xE0\\x01' AS c1;
 
 --echo # while the query with a user variable is performed as string
@@ -441,7 +441,7 @@ SET NAMES latin1;
 SET @regCheck= _binary '\\xE0\\x01';
 SELECT 0xE001 REGEXP @regCheck;
 
---echo # Testing workarond N3: This makes derivation of the subject string stronger (IMLICIT instead of COERCIBLE)
+--echo # Testing workaround N3: This makes derivation of the subject string stronger (IMLICIT instead of COERCIBLE)
 SET NAMES latin1;
 SET @regCheck= '\\xE0\\x01';
 SELECT CAST(0xE001 AS BINARY) REGEXP @regCheck;

mysql-test/main/func_str.test

@@ -95,7 +95,7 @@ SELECT CONCAT('"',CONCAT_WS('";"',repeat('a',60),repeat('b',60),repeat('c',60),r
 select insert('txs',2,1,'hi'),insert('is ',4,0,'a'),insert('txxxxt',2,4,'es');
 select replace('aaaa','a','b'),replace('aaaa','aa','b'),replace('aaaa','a','bb'),replace('aaaa','','b'),replace('bbbb','a','c');
 --disable_view_protocol
-#chaeck after fix MDEV-31540
+#check after fix MDEV-31540
 --disable_cursor_protocol
 --enable_metadata
 select replace('aaaa','a','bbbb');
@@ -463,7 +463,7 @@ select charset(a), collation(a), coercibility(a) from t1;
 drop table t1;
 select charset(null), collation(null), coercibility(null);
 #
-# Make sure OUTER JOIN is not replaced with a regular joun
+# Make sure OUTER JOIN is not replaced with a regular join
 #
 CREATE TABLE t1 (a int, b int);
 CREATE TABLE t2 (a int, b int);
@@ -490,7 +490,7 @@ select SUBSTR('abcdefg',1,-1) FROM DUAL;
 
 #
 # Test that fix_fields doesn't follow to upper level (to comparison)
-# when an error on a lower level (in concat) has accured:
+# when an error on a lower level (in concat) has occured:
 #
 create table t7 (s1 char);
 --error 1267
@@ -1627,7 +1627,7 @@ SELECT format(12345678901234567890.123, 3, 'en_US');
 --enable_cursor_protocol
 SELECT format(12345678901234567890.123, 3, 'it_CH');
 SELECT format(12345678901234567890.123, 3, 'ru_RU');
-#checkafter fix MDEV-31512
+#check after fix MDEV-31512
 --disable_cursor_protocol
 SELECT format(12345678901234567890.123, 3, 'ta_IN');
 --enable_cursor_protocol

mysql-test/main/func_time.result

@@ -6031,7 +6031,7 @@ SELECT
 ADDTIME(TIME'-838:59:59.9999999', '87649416:59:59') AS c7;
 c7	NULL
 # HOUR is max_useful_hour() (inside INTERVAL DAY TO SECOND range)
-# Expect max TIME(0) + zero fraction + TIME warnings + no INTEVAL warnings
+# Expect max TIME(0) + zero fraction + TIME warnings + no INTERVAL warnings
 SELECT
 ADDTIME(TIME'00:00:00', 876494155959) AS ci,
 ADDTIME(TIME'00:00:00', 876494155959)+0 AS c0,

mysql-test/main/func_time.test

@@ -301,7 +301,7 @@ select unix_timestamp('2038-01-17 12:00:00');
 
 #
 # Check positive shift. (it happens only on
-# platfroms with unsigned time_t, such as QNX)
+# platforms with unsigned time_t, such as QNX)
 #
 select unix_timestamp('1970-01-01 03:00:01');
 
@@ -3078,7 +3078,7 @@ SELECT
 --enable_warnings
 
 --echo # HOUR is max_useful_hour() (inside INTERVAL DAY TO SECOND range)
---echo # Expect max TIME(0) + zero fraction + TIME warnings + no INTEVAL warnings
+--echo # Expect max TIME(0) + zero fraction + TIME warnings + no INTERVAL warnings
 SELECT
   ADDTIME(TIME'00:00:00', 876494155959) AS ci,
   ADDTIME(TIME'00:00:00', 876494155959)+0 AS c0,

mysql-test/main/gis.test

@@ -777,7 +777,7 @@ SET @a=POLYFROMWKB(@a);
 #
 
 #The SELECT statement cannot contain a subquery in the FROM clause
-#fore  --view-protocol
+#for  --view-protocol
 --disable_view_protocol
 create table t1(a geometry NOT NULL)engine=myisam;
 insert into t1 values (geomfromtext("point(0 1)"));

mysql-test/main/grant.test

@@ -87,7 +87,7 @@ flush privileges;
 show grants for mysqltest_1@localhost;
 
 #
-# Test what happens when you have same table and colum level grants
+# Test what happens when you have same table and column level grants
 #
 
 create table t1 (a int);
@@ -1531,7 +1531,7 @@ create table t4 (i INT);
 connection default;
 grant select, insert on mysqltest.t2 to mysqltest@localhost;
 grant         insert on mysqltest.t4 to mysqltest@localhost;
-# to specify ACLs for non-existent objects, must explictly |CREATE
+# to specify ACLs for non-existent objects, must explicitly |CREATE
 grant create, insert on mysqltest.t5 to mysqltest@localhost;
 grant create, insert on mysqltest.t6 to mysqltest@localhost;
 flush privileges;

mysql-test/main/grant_slave_monitor.test

@@ -8,11 +8,11 @@
 #
 # Step1: GRANT ALL privileges for a new user 'user1' and then REVOKE
 #        SLAVE MONITOR privileges.
-# Step2: Execute SHOW SLAVE STAUTS/SHOW RELAYLOG EVENTS commands and expect
+# Step2: Execute SHOW SLAVE STATUS/SHOW RELAYLOG EVENTS commands and expect
 #        ER_SPECIFIC_ACCESS_DENIED_ERROR. This also verifies that REPLICATION
 #        SLAVE ADMIN privilege is not required for these two commands.
 # Step3: GRANT SLAVE MONITOR privilege and observe that both commands are
-#        allowd to execute.
+#        allowed to execute.
 #
 # ==== References ====
 #

mysql-test/main/greedy_optimizer.result

@@ -1313,7 +1313,7 @@ COUNT(*)
 # plans without restricting 'optimizer_search_depth'.
 # Fix problems like those reported as bug#41740 & bug#58225.
 #
-# EPLAIN of queries using T1-T62 will timeout/hang wo/ fixes
+# EXPLAIN of queries using T1-T62 will timeout/hang wo/ fixes
 #
 DROP TABLE t10, t10000;
 CREATE TABLE t1 ( K INT NOT NULL AUTO_INCREMENT,

mysql-test/main/greedy_optimizer.test

@@ -2,7 +2,7 @@
 
 #
 # A simple test of the greedy query optimization algorithm and the switches that
-# control the optimizationprocess.
+# controls the optimization process.
 #
 
 #
@@ -140,7 +140,7 @@ insert into t7 values (21,2,3,4,5,6);
 # The actual test begins here
 #
 
-# This value swithes back to the old implementation of 'find_best()'
+# This value switches back to the old implementation of 'find_best()'
 # set optimizer_search_depth=63; - old (independent of the optimizer_prune_level)
 #
 # These are the values for the parameters that control the greedy optimizer
@@ -729,7 +729,7 @@ WHERE x.k=t10.i
 --echo # plans without restricting 'optimizer_search_depth'.
 --echo # Fix problems like those reported as bug#41740 & bug#58225.
 --echo #
---echo # EPLAIN of queries using T1-T62 will timeout/hang wo/ fixes
+--echo # EXPLAIN of queries using T1-T62 will timeout/hang wo/ fixes
 --echo #
 
 DROP TABLE t10, t10000;

mysql-test/main/group_min_max.result

@@ -2134,7 +2134,7 @@ Warnings:
 Note	1003	select sum(ord(`test`.`t1`.`a1`)) AS `sum(ord(a1))` from `test`.`t1` where `test`.`t1`.`a1` > 'a' group by `test`.`t1`.`a1`,`test`.`t1`.`a2`,`test`.`t1`.`b`
 create table t4 as select distinct a1, a2, b, c from t1;
 alter table t4 add unique index idxt4 (a1, a2, b, c);
-# This is "superceded" by MDEV-7118, and Loose Index Scan is again an option:
+# This is "superseded" by MDEV-7118, and Loose Index Scan is again an option:
 explain
 select a1, a2, b, min(c) from t4 group by a1, a2, b;
 id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra

mysql-test/main/group_min_max.test

@@ -711,7 +711,7 @@ explain extended select sum(ord(a1)) from t1 where (a1 > 'a') group by a1,a2,b;
 create table t4 as select distinct a1, a2, b, c from t1;
 alter table t4 add unique index idxt4 (a1, a2, b, c);
 
---echo # This is "superceded" by MDEV-7118, and Loose Index Scan is again an option:
+--echo # This is "superseded" by MDEV-7118, and Loose Index Scan is again an option:
 explain
 select a1, a2, b, min(c) from t4 group by a1, a2, b;
 select a1, a2, b, min(c) from t4 group by a1, a2, b;

mysql-test/main/having_cond_pushdown.result

@@ -2030,7 +2030,7 @@ EXPLAIN
     }
   }
 }
-# conjuctive subformula : pushdown using WHERE multiple equalities
+# conjunctive subformula : pushdown using WHERE multiple equalities
 set statement optimizer_switch='condition_pushdown_from_having=off' for SELECT t1.a,MAX(t1.b),t1.c
 FROM t1
 WHERE (t1.a=t1.c)

mysql-test/main/having_cond_pushdown.test

@@ -445,7 +445,7 @@ HAVING ((t1.a=t1.c) AND (t1.a>1)) OR ((t1.a<3) AND (t1.c>3));
 --source include/explain-no-costs.inc
 eval $no_pushdown explain format=json $query;
 
---echo # conjuctive subformula : pushdown using WHERE multiple equalities
+--echo # conjunctive subformula : pushdown using WHERE multiple equalities
 let $query=
 SELECT t1.a,MAX(t1.b),t1.c
 FROM t1

mysql-test/main/host_cache_size_functionality.test

@@ -15,7 +15,7 @@
 #              * Value Check                                                  #
 #              * Scope Check                                                  #
 #              * Functionality Check                                          #
-#              * Accessability Check                                          #
+#              * Accessibility Check                                          #
 #                                                                             #               
 # This test does not perform the crash recovery on this variable              # 
 # For crash recovery test on default change please run the ibtest             #
@@ -125,7 +125,7 @@ SELECT Host_Cache_Size = @@SESSION.Host_Cache_Size;
 #The below check has been commented out as the IP fetch is different in a P2P connection than BroadBand connection
 #--echo '#---------------------WL6372_VAR_6_06----------------------#'
 ###############################################################################
-# Checking the Host   cahce functionality                                     #
+# Checking the Host cache functionality                                       #
 ###############################################################################
 
 #SET @@GLOBAL.Host_Cache_Size=2;

mysql-test/main/information_schema_chmod.test

@@ -3,7 +3,7 @@
 # information_schema, part2" this test can't be run on Window with our
 # current test framework. When "chmod -r" is done within cygwin the
 # MySQL Server can still read the directory.
-# Manual testing shows the functionalty to skip unlistable directories
+# Manual testing shows the functionality to skip unlistable directories
 # works on windows
 #
 --source include/not_windows.inc

mysql-test/main/information_schema_db.test

@@ -344,7 +344,7 @@ drop database db;
 set @old_max_password_errors=@@max_password_errors;
 set global max_password_errors=2;
 
-# must use replace_regex for case insenstive replacement
+# must use replace_regex for case insensitive replacement
 let $hostname_re= `select concat('/@\'', @@hostname, '\'/@HOSTNAME/i')`;
 
 # set the password_last_changed value

mysql-test/main/information_schema_tables.result

@@ -37,7 +37,7 @@ DROP VIEW v;
 DROP VIEW v2;
 DROP FUNCTION f;
 # The third test version from the MDEV.
-# It failed reliably, and should be deterninistic.
+# It failed reliably, and should be deterministic.
 CREATE FUNCTION f1() RETURNS INT RETURN 1;
 CREATE VIEW v01 AS SELECT f1();
 CREATE VIEW v02 AS SELECT f1();

mysql-test/main/information_schema_tables.test

@@ -25,7 +25,7 @@ END LOOP $
 --delimiter ;
 --connection default
 # Avoid "Prepared statement needs to be re-prepared"
-# Note, the code could probably eventually fixed to avoid forcing re-pepare if
+# Note, the code could probably eventually be fixed to avoid forcing re-prepare if
 # the *temporary* instance of Sp_caches (not the permanent one) was invalidated.
 --disable_ps_protocol
 --disable_warnings
@@ -64,7 +64,7 @@ DROP VIEW v2;
 DROP FUNCTION f;
 
 --echo # The third test version from the MDEV.
---echo # It failed reliably, and should be deterninistic.
+--echo # It failed reliably, and should be deterministic.
 
 CREATE FUNCTION f1() RETURNS INT RETURN 1;
 CREATE VIEW v01 AS SELECT f1();