mysql-5.5.18 merge

mysql-test/extra/rpl_tests/rpl_insert_duplicate.test

@@ -1,59 +0,0 @@
-# BUG#59338 Inconsistency in binlog for statements that don't change any rows STATEMENT SBR
-# In SBR, if a statement does not fail, it is always written to the binary log,
-# regardless if rows are changed or not. If there is a failure, a statement is
-# only written to the binary log if a non-transactional (.e.g. MyIsam) engine
-# is updated. INSERT ON DUPLICATE KEY UPDATE was not following the rule above
-# and was not written to the binary log, if then engine was Innodb.
-#
-# In this test case, we check if INSERT ON DUPLICATE KEY UPDATE that does not
-# change anything is still written to the binary log.
-
-# Prepare environment
---connection master
-
-eval CREATE TABLE t1 (
- a INT UNSIGNED NOT NULL PRIMARY KEY
-) ENGINE=$engine_type;
-
-eval CREATE TABLE t2 (
- a INT UNSIGNED
-) ENGINE=$engine_type;
-
-INSERT INTO t1 VALUES (1);
-INSERT INTO t2 VALUES (1);
-
-# An insert duplicate that does not update anything must be written to the binary
-# log in SBR and MIXED modes. We check this property by summing a before and after
-# the update and comparing the binlog positions. The sum should be the same at both
-# points and the statement should be in the binary log.
---let $binlog_file= query_get_value("SHOW MASTER STATUS", File, 1)
---let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1)
---let $statement_file=INSERT INTO t1 SELECT t2.a FROM t2 ORDER BY t2.a ON DUPLICATE KEY UPDATE t1.a= t1.a
---eval $statement_file
-
---let $assert_cond= SUM(a) = 1 FROM t1
---let $assert_text= Sum of elements in t1 should be 1.
---source include/assert.inc
-
-if (`SELECT @@BINLOG_FORMAT = 'ROW'`)
-{
-  --let $binlog_position_cmp= =
-  --let $assert_cond= [SHOW MASTER STATUS, Position, 1] $binlog_position_cmp $binlog_start
-  --let $assert_text= In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.
-}
-if (`SELECT @@BINLOG_FORMAT != 'ROW'`)
-{
-  --let $assert_cond= \'[\'SHOW BINLOG EVENTS IN "$binlog_file" FROM $binlog_start LIMIT 1, 1\', Info, 1]\' LIKE \'%$statement_file\'
-  --let $assert_text= In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.
-}
---source include/assert.inc
-
-# Compare master and slave
---sync_slave_with_master
---let $diff_tables= master:test.t1 , slave:test.t1
---source include/diff_tables.inc
-
-# Clean up
---connection master
-drop table t1, t2;
---sync_slave_with_master

mysql-test/extra/rpl_tests/rpl_insert_id.test

@@ -77,6 +77,7 @@ eval create table t2(b int auto_increment, c int, key(b)) engine=$engine_type;
 insert into t1 values (10);
 insert into t1 values (null),(null),(null);
 insert into t2 values (5,0);
+--disable_warnings ONCE
 insert into t2 (c) select * from t1 ORDER BY a;
 select * from t2 ORDER BY b;
 sync_slave_with_master;
@@ -113,8 +114,10 @@ set @@session.sql_auto_is_null=1;
 eval create table t1(a int auto_increment, key(a)) engine=$engine_type;
 eval create table t2(a int) engine=$engine_type;
 insert into t1 (a) values (null);
+--disable_warnings
 insert into t2 (a) select a from t1 where a is null;
 insert into t2 (a) select a from t1 where a is null;
+--enable_warnings
 select * from t2;
 sync_slave_with_master;
 connection slave;
@@ -172,17 +175,15 @@ begin
 end|
 delimiter ;|
 
---disable_warnings
+--disable_warnings ONCE
 insert into t1 (last_id) values (0);
---enable_warnings
 
 drop trigger t1_bi;
 
 # Check that nested call doesn't affect outer context.
 select last_insert_id();
---disable_warnings
+--disable_warnings ONCE
 select bug15728_insert();
---enable_warnings
 select last_insert_id();
 insert into t1 (last_id) values (bug15728());
 # This should be exactly one greater than in the previous call.
@@ -190,9 +191,8 @@ select last_insert_id();
 
 # BUG#20339 - stored procedure using LAST_INSERT_ID() does not
 # replicate statement-based
---disable_warnings
+--disable_warnings ONCE
 drop procedure if exists foo;
---enable_warnings
 delimiter |;
 create procedure foo()
 begin
@@ -252,6 +252,7 @@ select * from t1 order by n;
 # table's counter, the counter for next row is bigger than the
 # after-value of the updated row.
 connection master;
+--disable_warnings ONCE
 insert into t1 values (NULL,400),(3,500),(NULL,600) on duplicate key UPDATE n=1000;
 select * from t1 order by n;
 sync_slave_with_master;
@@ -270,6 +271,7 @@ delete from t1 where b <> 100;
 select * from t1 order by n;
 
 connection master;
+--disable_warnings ONCE
 insert into t1 values(null,100),(null,350) on duplicate key update n=2;
 select * from t1 order by n;
 sync_slave_with_master;
@@ -287,6 +289,7 @@ connection master;
 # testcase with INSERT VALUES
 eval CREATE TABLE t1 (a INT NOT NULL PRIMARY KEY AUTO_INCREMENT, b INT,
                       UNIQUE(b)) ENGINE=$engine_type;
+--disable_warnings ONCE
 INSERT INTO t1(b) VALUES(1),(1),(2) ON DUPLICATE KEY UPDATE t1.b=10;
 SELECT * FROM t1 ORDER BY a;
 sync_slave_with_master;
@@ -314,19 +317,23 @@ INSERT INTO t2 (field_a, field_b, field_c) VALUES (3, 'c', '3c');
 INSERT INTO t2 (field_a, field_b, field_c) VALUES (4, 'd', '4d');
 INSERT INTO t2 (field_a, field_b, field_c) VALUES (5, 'e', '5e');
 # Updating table t1 based on values from table t2
+--disable_warnings
 INSERT INTO t1 (field_1, field_2, field_3)
 SELECT t2.field_a, t2.field_b, t2.field_c
 FROM t2
 ON DUPLICATE KEY UPDATE
 t1.field_3 = t2.field_c;
+--enable_warnings
 # Inserting new record into t2
 INSERT INTO t2 (field_a, field_b, field_c) VALUES (6, 'f', '6f');
 # Updating t1 again
+--disable_warnings
 INSERT INTO t1 (field_1, field_2, field_3)
 SELECT t2.field_a, t2.field_b, t2.field_c
 FROM t2
 ON DUPLICATE KEY UPDATE
 t1.field_3 = t2.field_c;
+--enable_warnings
 SELECT * FROM t1 ORDER BY id;
 sync_slave_with_master;
 SELECT * FROM t1 ORDER BY id;
@@ -433,9 +440,8 @@ delimiter ;|
 
 INSERT INTO t1 VALUES (NULL, -1);
 CALL p1();
---disable_warnings
+--disable_warnings ONCE
 SELECT f1();
---enable_warnings
 INSERT INTO t1 VALUES (NULL, f2()), (NULL, LAST_INSERT_ID()),
                       (NULL, LAST_INSERT_ID()), (NULL, f2()), (NULL, f2());
 INSERT INTO t1 VALUES (NULL, f2());
@@ -504,16 +510,14 @@ insert into t2 (id) values(1),(2),(3);
 delete from t2;
 set sql_log_bin=1;
 #inside SELECT, then inside INSERT
---disable_warnings
+--disable_warnings ONCE
 select insid();
---enable_warnings
 set sql_log_bin=0;
 insert into t2 (id) values(5),(6),(7);
 delete from t2 where id>=5;
 set sql_log_bin=1;
---disable_warnings
+--disable_warnings ONCE
 insert into t1 select insid();
---enable_warnings
 select * from t1 order by id;
 select * from t2 order by id;
 
@@ -537,6 +541,7 @@ begin
   insert into t2 values(null,3);
 end|
 delimiter ;|
+--disable_warnings ONCE
 call foo();
 select * from t1 order by n;
 select * from t2 order by id;

mysql-test/extra/rpl_tests/rpl_insert_ignore.test

@@ -31,7 +31,7 @@ INSERT INTO t2 VALUES (3, 5);
 INSERT INTO t2 VALUES (4, 3);
 INSERT INTO t2 VALUES (5, 4);
 INSERT INTO t2 VALUES (6, 6);
-
+--disable_warnings ONCE
 INSERT IGNORE INTO t1 SELECT NULL, t2.b FROM t2 ORDER BY t2.a;
 --let $assert_cond= COUNT(*) = 6 FROM t1
 --let $assert_text= Count of elements in t1 should be 6.
@@ -51,25 +51,70 @@ INSERT IGNORE INTO t1 SELECT NULL, t2.b FROM t2 ORDER BY t2.a;
 --let $binlog_file= query_get_value("SHOW MASTER STATUS", File, 1)
 --let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1)
 --let $statement_file=INSERT IGNORE INTO t1 SELECT NULL, t2.b FROM t2 ORDER BY t2.a
+--disable_warnings ONCE
 --eval $statement_file
 
 --let $assert_cond= COUNT(*) = 6 FROM t1
 --let $assert_text= Count of elements in t1 should be 6.
 --source include/assert.inc
 
-if (`SELECT @@BINLOG_FORMAT = 'ROW'`)
+if (`SELECT @@BINLOG_FORMAT != 'STATEMENT'`)
 {
   --let $binlog_position_cmp= =
   --let $assert_cond= [SHOW MASTER STATUS, Position, 1] $binlog_position_cmp $binlog_start
   --let $assert_text= In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.
 }
-if (`SELECT @@BINLOG_FORMAT != 'ROW'`)
+if (`SELECT @@BINLOG_FORMAT = 'STATEMENT'`)
 {
   --let $assert_cond= \'[\'SHOW BINLOG EVENTS IN "$binlog_file" FROM $binlog_start LIMIT 2, 1\', Info, 1]\' LIKE \'%$statement_file\'
   --let $assert_text= In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.
 }
+
 --source include/assert.inc
 
+# An insert duplicate that does not update anything must be written to the binary
+# log in SBR and MIXED modes. We check this property by summing a before and after
+# the update and comparing the binlog positions. The sum should be the same at both
+# points and the statement should be in the binary log.
+--disable_warnings
+DROP TABLE t1;
+DROP TABLE t2;
+--enable_warnings
+eval CREATE TABLE t1 (
+ a INT UNSIGNED NOT NULL PRIMARY KEY
+) ENGINE=$engine_type;
+
+eval CREATE TABLE t2 (
+ a INT UNSIGNED
+) ENGINE=$engine_type;
+
+INSERT INTO t1 VALUES (1);
+INSERT INTO t2 VALUES (1);
+
+--let $binlog_file= query_get_value("SHOW MASTER STATUS", File, 1)
+--let $binlog_start= query_get_value("SHOW MASTER STATUS", Position, 1)
+--let $statement_file=INSERT INTO t1 SELECT t2.a FROM t2 ORDER BY t2.a ON DUPLICATE KEY UPDATE t1.a= t1.a
+--disable_warnings ONCE
+--eval $statement_file
+
+--let $assert_cond= SUM(a) = 1 FROM t1
+--let $assert_text= Sum of elements in t1 should be 1.
+--source include/assert.inc
+
+if (`SELECT @@BINLOG_FORMAT != 'STATEMENT'`)
+{
+  --let $binlog_position_cmp= =
+  --let $assert_cond= [SHOW MASTER STATUS, Position, 1] $binlog_position_cmp $binlog_start
+  --let $assert_text= In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.
+}
+if (`SELECT @@BINLOG_FORMAT = 'STATEMENT'`)
+{
+  --let $assert_cond= \'[\'SHOW BINLOG EVENTS IN "$binlog_file" FROM $binlog_start LIMIT 1, 1\', Info, 1]\' LIKE \'%$statement_file\'
+  --let $assert_text= In SBR or MIXED modes, the event in the binlog should be the same that was executed. In RBR mode, binlog position should stay unchanged.
+}
+--source include/assert.inc
+
+
 # Clean up
 --connection master
 drop table t1, t2;

mysql-test/extra/rpl_tests/rpl_reset_slave.test

@@ -80,5 +80,31 @@ reset slave;
 source include/check_slave_no_error.inc;
 change master to master_user='root';
 
---let $rpl_only_running_threads= 1
+
+#
+# BUG#11809016 - NO WAY TO DISCOVER AN INSTANCE IS NO LONGER A SLAVE FOLLOWING MYSQL BUG#28796
+#
+
+reset slave;
+--source include/start_slave.inc
+
+--source include/stop_slave.inc
+--let $_slave_master_host= query_get_value(SHOW SLAVE STATUS, Master_Host, 1)
+--let $_slave_master_user= query_get_value(SHOW SLAVE STATUS, Master_User, 1)
+--let $_slave_master_port= query_get_value(SHOW SLAVE STATUS, Master_Port, 1)
+
+reset slave all;
+--error ER_BAD_SLAVE
+start slave;
+
+--let $_show_master_host= query_get_value(SHOW SLAVE STATUS, Master_Host, 1)
+if ($_show_master_host != No such row)
+{
+  die;
+}
+
+--replace_result $_slave_master_host MASTER_HOST $_slave_master_user MASTER_USER $_slave_master_port MASTER_PORT
+--eval CHANGE MASTER TO MASTER_HOST= '$_slave_master_host', MASTER_USER= '$_slave_master_user', MASTER_PORT= $_slave_master_port
+--source include/start_slave.inc
+
 --source include/rpl_end.inc