mariadb-columnstore-engine/writeengine/bulk/we_columninfo.h

/* Copyright (C) 2014 InfiniDB, Inc.

   This program is free software; you can redistribute it and/or
   modify it under the terms of the GNU General Public License
   as published by the Free Software Foundation; version 2 of
   the License.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
   MA 02110-1301, USA. */

/*******************************************************************************
 * $Id: we_columninfo.h 4726 2013-08-07 03:38:36Z bwilkinson $
 *
 *******************************************************************************/

/** @file
 *  Contains main class used to manage column information.
 */

#pragma once

#include "we_type.h"
#include "we_brm.h"
#include "we_colop.h"
#include "we_colbufmgr.h"
#include "we_colextinf.h"
#include "we_dctnrycompress.h"

#include <boost/thread/mutex.hpp>
#include <boost/scoped_ptr.hpp>
#include <sys/time.h>
#include <vector>

#include "atomicops.h"

namespace WriteEngine
{
class Log;
class ColumnAutoInc;
class DBRootExtentTracker;
class BRMReporter;
class TableInfo;
struct DBRootExtentInfo;

enum Status
{
  PARSE_COMPLETE = 0,
  READ_COMPLETE,
  READ_PROGRESS,
  NEW,
  ERR
};

// State of starting db file:
//   CREATE_FILE_ON_EMPTY - empty PM; create starting seg file
//   CREATE_FILE_ON_DISABLED - HWM extent is disabled; create starting seg file
//   FILE_EXISTS - target seg file exists; will add more rows
//   ERROR_STATE - error has occurred executing delayed file creation
enum InitialDBFileStat
{
  INITIAL_DBFILE_STAT_CREATE_FILE_ON_EMPTY = 1,
  INITIAL_DBFILE_STAT_CREATE_FILE_ON_DISABLED = 2,
  INITIAL_DBFILE_STAT_FILE_EXISTS = 3,
  INITIAL_DBFILE_STAT_ERROR_STATE = 4
};

struct LockInfo
{
  int locker;
  Status status;
  LockInfo() : locker(-1), status(WriteEngine::NEW)
  {
  }
};

//------------------------------------------------------------------------------
// Note the following mutex lock usage using fColMutex within ColumnInfo.
// This is the mutex that is used to manage the state of the current segment
// column file associated with ColumnInfo.  The state of the column being
// managed by ColumnInfo is typically driven by calls from BulkLoadBuffer
// to ColumnBufferManager; so ColumnBufferManager frequently initiates the
// mutex lock.  However, when parsing is complete for a table, then some
// ColumnInfo functions are called outside of ColumnBufferManager scope (by
// TableInfo::setParseComplete), and these ColumnInfo functions (getSegFileInfo
// and getBRMUpdateInfo) must lock the mutex on their own.
//
// Explicit locks initiated by these ColumnBufferManager functions:
//   reserveSection()
//   releaseSection()
//   intermediateFlush()
//   extendTokenColumn()
//
// Implicit locks assumed by these ColumnBufferManager functions:
//   resizeColumnBuffer() (within scope of lock in reserveSection())
//   rowsExtentCheck()    (within scope of lock in reserveSection())
//   writeToFile()        (within scope of lock in reserveSection() or
//                                                 releaseSection())
//   writeToFileExtentCheck() (within scope of lock in writeToFile() or
//                                                 flush()
//   finishFile()         (within scope of lock in finishParsing()
//   flush()              (within scope of lock in intermediateFlush() or
//                                                 finishParsing())
//
// Other ColumnBufferManager functions:
//   setDbFile()   - called by main thread during preprocesing, or within scope
//                   of a lock when an extent is being added.
//   resetToBeCompressedColBuf() - called within scope of a lock when an extent
//                   is being added
//
// Explicit locks in ColumnInfo:
//   createDelayedFileIfNeeded()
//   getSegFileInfo()
//   getBRMUpdateInfo()
//   finishParsing()
//
//------------------------------------------------------------------------------

/** @brief Maintains information about a DB column.
 */
class ColumnInfo : public WeUIDGID
{
 public:
  //--------------------------------------------------------------------------
  // Public Data Members
  //--------------------------------------------------------------------------

  /** @brief Current column
   */
  Column curCol;

  /** @brief ColumnOp instance
   */
  boost::scoped_ptr<ColumnOp> colOp;

  /** @brief Column information.
   */
  JobColumn column;

  /** @brief column id
   */
  int id;

  /** @brief Processing time for the column. (in milliseconds)
   */
  double lastProcessingTime;

#ifdef PROFILE
  /** @brief Total processing time for the column. (in milliseconds)
   */
  double totalProcessingTime;
#endif

  /** @brief Instance of the write buffer manager.
   */
  ColumnBufferManager* fColBufferMgr;

  /** @brief Freespace (in bytes) at the end of the current db column file
   *   For compressed data files, this is the "raw" data byte count,
   *   not the compressed byte count.
   */
  long long availFileSize;

  /** @brief Total size capacity of current db column segment file.
   *   For compressed data files, this is the "raw" data byte count,
   *   not the compressed byte count.
   */
  long long fileSize;

  //--------------------------------------------------------------------------
  // Public Functions
  //--------------------------------------------------------------------------

  /** @brief Constructor.
   */
  ColumnInfo(Log* logger, int id, const JobColumn& column, DBRootExtentTracker* pDBRootExtTrk,
             TableInfo* pTableInfo);

  /** @brief Destructor
   */
  virtual ~ColumnInfo();

  /** @brief Returns last input Row num in current "logical" extent; used
   *  to track min/max value per extent, as the data is parsed.   0-based
   *  where Row 0 is first valid input row in the import.
   */
  RID lastInputRowInExtent() const;

  /** @brief Increment last input Row num in current "logical" extent, so
   *  that it references the last row of the next extent; used in tracking
   *  min/max value extent.  0-based where Row 0 is first valid input row
   *  in the import.  This function is called when a Read buffer crosses
   *  an extent boundary.
   */
  void lastInputRowInExtentInc();

  /** @brief Update dictionary method.
   *  Parses and stores specified strings into the store file, and
   *  returns the assigned tokens (tokenBuf) to be stored in the
   *  corresponding column token file.
   */
  int updateDctnryStore(char* buf, ColPosPair** pos, const int totalRow, char* tokenBuf);

  /** @brief Close the current Column file.
   *  @param bCompletedExtent are we completing an extent
   *  @param bAbort indicates if job is aborting and file should be
   *  closed without doing extra work: flushing buffer, etc.
   */
  virtual int closeColumnFile(bool bCompletingExtent, bool bAbort);

  /** @brief Close the current Dictionary store file.
   *  @param bAbort Indicates if job is aborting and file should be
   *  closed without doing extra work: flushing buffer, updating HWM, etc
   */
  int closeDctnryStore(bool bAbort);

  /** @brief utility to convert a Status enumeration to a string
   */
  static void convertStatusToString(WriteEngine::Status status, std::string& statusString);

  /** @brief Adds an extent to "this" column if needed to contain
   *  the specified number of rows. (New version, supplants checkAnd-
   *  ExtendColumn()).  Also saves the HWM associated with the current
   *  extent, and uses it to update the extentmap at the job's end.
   *
   *  The state of ColumnInfo is updated to reflect the new extent.
   *  For example, curCol is updated with the DBRoot, partition, and
   *  segment file corresponding to the new extent and segment file.
   *
   *  @param saveLBIDForCP (in) Should new extent's LBID be saved in the
   *         extent stats we are saving to update Casual Partition.
   */
  int extendColumn(bool saveLBIDForCP);

  /** @brief Get Extent Map updates to send to BRM at EOJ, for this column.
   *  @param brmReporter Reporter object where BRM updates are to be saved
   */
  void getBRMUpdateInfo(BRMReporter& brmReporter);

  /** @brief Commit/Save auto-increment updates
   */
  int finishAutoInc();

  /** @brief Get current dbroot, partition, segment and HWM for this column.
   */
  void getSegFileInfo(DBRootExtentInfo& fileInfo);

  /** @brief Get last updated saved LBID.
   */
  BRM::LBID_t getLastUpdatedLBID() const;

  /** @brief Initialize autoincrement value from the current "next" value
   *  taken from the system catalog.
   */
  int initAutoInc(const std::string& fullTableName);

  /** @brief Open a new Dictionary store file based on the setting of the
   *  DBRoot, partition, and segment settings in curCol.dataFile.
   *  @param bMustExist Indicates whether store file must already exist
   */
  int openDctnryStore(bool bMustExist);

  /** @brief dictionary blocks that will need to be flushed from cache */
  std::vector<BRM::LBID_t> fDictBlocks;

  /** @brief Set abbreviated extent flag if this is an abbrev extent */
  void setAbbrevExtentCheck();

  /** @brief Is current extent we are loading, an "abbreviated" extent
   */
  bool isAbbrevExtent();

  /** @brief Expand abbreviated extent in current column segment file.
   *  @param bRetainFilePos controls whether current file position is
   *         to be retained up return from the function.
   */
  int expandAbbrevExtent(bool bRetainFilePos);

  /** @brief Print extent CP information
   */
  void printCPInfo(JobColumn column);

  /** @brief Set width factor relative to other columns in the same table.
   */
  void relativeColWidthFactor(int colWidFactor);

  /** @brief Update extent CP information
   */
  template <typename T>
  void updateCPInfo(RID lastInputRow, T minVal, T maxVal, ColDataType colDataType, int width);

  /** @brief Setup initial extent we will begin loading at start of import.
   *  @param dbRoot    DBRoot of starting extent
   *  @param partition Partition number of starting extent
   *  @param segment   Segment file number of starting extent
   *  @param tblName   Name of table holding this column
   *  @param lbid      LBID associated with starting extent
   *  @param oldHwm    HWM associated with current HWM extent
   *  @param hwm       Starting HWM after oldHWM has been incremented to
   *                   account for initial block skipping.
   *  @param bSkippedtoNewExtent Did block skipping advance to next extent
   *  @param bIsNewExtent Treat as new extent when updating CP min/max
   */
  int setupInitialColumnExtent(uint16_t dbRoot, uint32_t partition, uint16_t segment,
                               const std::string& tblName, BRM::LBID_t lbid, HWM oldHwm, HWM hwm,
                               bool bSkippedToNewExtent, bool bIsNewExtent);

  /** @brief Setup a DB file to be created for starting extent only when needed
   *  @param dbRoot     DBRoot of starting extent
   *  @param partition  Partition number of starting extent
   *  @param segment    Segment file number of starting extent
   *  @param hwm        Starting HWM for new start extent
   *  @param bEmptyPM   Are we setting up delayed file creation because a PM
   *                    has no extents (or is the HWM extent just disabled)
   */
  void setupDelayedFileCreation(uint16_t dbRoot, uint32_t partition, uint16_t segment, HWM hwm,
                                bool bEmptyPM);

  /** @brief Belatedly create a starting DB file for a PM that has none.
   *  @param tableName Name of table for which this column belongs
   */
  int createDelayedFileIfNeeded(const std::string& tableName);

  /** @brief Update how many bytes of data are in the column segment file and
   *  how much room remains in the file (till the current extent is full).
   *  @param numBytesWritten Number of bytes just added to the column file.
   */
  void updateBytesWrittenCounts(unsigned int numBytesWritten);

  /** @brief Returns the list of HWM dictionary blks to be cached
   */
  void getDictFlushBlks(std::vector<BRM::LBID_t>& blks) const;

  /** @brief Returns the current file size in bytes
   */
  int64_t getFileSize() const;

  /** @brief Has file filled up all its extents
   */
  bool isFileComplete() const;

  /** @brief Reserve block of auto-increment numbers to generate
   *  @param autoIncCount The number of autoincrement numbers to be reserved.
   *  @param nextValue    Value of the first reserved auto inc number.
   */
  int reserveAutoIncNums(uint32_t autoIncCount, uint64_t& nextValue);

  /** @brief Truncate specified dictionary file.  Only applies if compressed.
   * @param dctnryOid Dictionary store OID
   * @param root DBRoot of relevant dictionary store segment file.
   * @param pNum Partition number of relevant dictionary store segment file.
   * @param sNum Segment number of relevant dictionary store segment file.
   */
  virtual int truncateDctnryStore(OID dctnryOid, uint16_t root, uint32_t pNum, uint16_t sNum) const;

  /** @brief Increment saturated row count for this column in current import
   * @param satIncCnt Increment count to add to the total saturation count.
   */
  void incSaturatedCnt(int64_t satIncCnt);

  /** @brief Get saturated row count for this column.
   */
  long long saturatedCnt();

  /** @brief When parsing is complete for a column, this function is called
   * to finish flushing and closing the current segment file.
   */
  int finishParsing();

  /** @brief Mutex used to manage access to the output buffers and files.
   * This was formerly the fMgrMutex in ColumnBufferManager.  See comments
   * that precede this class definition for more information.
   */
  boost::mutex& colMutex();

  /** @brief Get number of rows per extent
   */
  unsigned rowsPerExtent();

  void setUIDGID(const uid_t uid, const gid_t gid) override;

 protected:
  //--------------------------------------------------------------------------
  // Protected Functions
  //--------------------------------------------------------------------------

  void addToSegFileList(File& dataFile,  // save HWM info per segment file
                        HWM hwm);
  void clearMemory();                              // clear memory used by this object
  void getCPInfoForBRM(BRMReporter& brmReporter);  // Get updated CP info for BRM
  int getHWMInfoForBRM(BRMReporter& brmReporter);  // Get updated HWM inf for BRM

  // Init last input Row number in current "logical" extent; used
  // to track min/max value per extent. 0-based where Row 0 is first
  // valid input row in the import.
  // bIsNewExtent indicates whether to treat as a new extent or not.
  void lastInputRowInExtentInit(bool bIsNewExtent);

  virtual int resetFileOffsetsNewExtent(const char* hdr);
  // Reset file; start new extent
  void setFileSize(HWM hwm, int abbrevFlag);  // Set fileSize data member

  // Prepare initial column segment file for importing of data.
  // oldHWM - Current HWM prior to initial block skipping.  This is only
  //     used for abbreviated extents, to detect when block skipping has
  //     caused us to require a full expanded extent.
  // newHWM - Starting point for adding data after initial blockskipping
  virtual int setupInitialColumnFile(HWM oldHWM,   // original HWM
                                     HWM newHWM);  // new HWM to start from

  virtual int saveDctnryStoreHWMChunk(bool& needBackup);  // Backup Dct HWM Chunk
  int extendColumnNewExtent(                              // extend column; new extent
      bool saveLBIDForCP, uint16_t dbRootNew, uint32_t partitionNew);
  virtual int extendColumnOldExtent(  // extend column; existing extent
      uint16_t dbRootNext, uint32_t partitionNext, uint16_t segmentNext, HWM hwmNext);

  //--------------------------------------------------------------------------
  // Protected Data Members
  //--------------------------------------------------------------------------

  boost::mutex fDictionaryMutex;         // Mutex for dicionary updates
  boost::mutex fColMutex;                // Mutex for column changes
  boost::mutex fAutoIncMutex;            // Mutex to manage fAutoIncLastValue
  boost::mutex fDelayedFileCreateMutex;  // Manage delayed file check/create
  Log* fLog;                             // Object used for logging

  // Blocks to skip at start of bulk load, if starting file has to be created
  // by createDelayedFileIfNeeded()
  HWM fDelayedFileStartBlksSkipped;

  // LBID corresponding to initial HWM saved in fSavedHWM at start of import.
  //
  // LBID is used, at the end of the import, to identify to DBRM, an
  // extent whose CasualPartition stats are to be cleared, because we will
  // have written additional rows to that extent as part of an import.
  BRM::LBID_t fSavedLbid;

  // The last updated LBID. In case `bulk` creates a new extent with new LBID
  // we have to initialize file header with created LBID.
  BRM::LBID_t fLastUpdatedLbid;

  // Size of a segment file (in bytes) when the file is opened
  // to add the next extent.
  // For compressed data files, this is the "raw" data byte count,
  // not the compressed byte count.
  long long fSizeWrittenStart;

  // Tracks the size of a segment file (in bytes) as rows are added.
  // For compressed data files, this is the "raw" data byte count,
  // not the compressed byte count.
  long long fSizeWritten;

  // Tracks last input Row number in the current "logical" extent,
  // where Row number is 0-based, with Row 0 being the first row in the
  // import.  Used by parsing thread to track when a read buffer crosses
  // an extent boundary.  We detect when a Read buffer crosses an ex-
  // pected extent boundary so that we can track a column's min/max for
  // each extent.
  RID fLastInputRowInCurrentExtent;

  bool fLoadingAbbreviatedExtent;   // Is current extent abbreviated
  ColExtInfBase* fColExtInf;        // Used to update CP at end of job
  long long fMaxNumRowsPerSegFile;  // Max num rows per segment file
  Dctnry* fStore;                   // Corresponding dctnry store file

  // For autoincrement column only... Tracks latest autoincrement value used
  long long fAutoIncLastValue;

  volatile int64_t fSaturatedRowCnt;  // No. of rows with saturated values

  // List of segment files updated during an import; used to track infor-
  // mation necessary to update the ExtentMap at the "end" of the import.
  std::vector<File> fSegFileUpdateList;

  TableInfo* fpTableInfo;              // pointer to the table info
  ColumnAutoInc* fAutoIncMgr;          // Maintains autoIncrement nextValue
  DBRootExtentTracker* fDbRootExtTrk;  // DBRoot extent tracker

  int fColWidthFactor;  // Wid factor relative to other cols

  InitialDBFileStat fDelayedFileCreation;  // Denotes when initial DB file is
  // to be created after preprocessing

  unsigned fRowsPerExtent;  // Number of rows per column extent
};

//------------------------------------------------------------------------------
// Inline functions
//------------------------------------------------------------------------------
inline void ColumnInfo::setUIDGID(const uid_t p_uid, const gid_t p_gid)
{
  WeUIDGID::setUIDGID(p_uid, p_gid);
  if (colOp)
    colOp->setUIDGID(this);
}

inline boost::mutex& ColumnInfo::colMutex()
{
  return fColMutex;
}

inline void ColumnInfo::getDictFlushBlks(std::vector<BRM::LBID_t>& blks) const
{
  blks = fDictBlocks;
}

inline int64_t ColumnInfo::getFileSize() const
{
  return fileSize;
}

inline void ColumnInfo::incSaturatedCnt(int64_t satIncCnt)
{
  (void)atomicops::atomicAdd(&fSaturatedRowCnt, satIncCnt);
}

inline bool ColumnInfo::isAbbrevExtent()
{
  return fLoadingAbbreviatedExtent;
}

inline RID ColumnInfo::lastInputRowInExtent() const
{
  return fLastInputRowInCurrentExtent;
}

inline void ColumnInfo::printCPInfo(JobColumn column)
{
  fColExtInf->print(column);
}

inline long long ColumnInfo::saturatedCnt()
{
  return fSaturatedRowCnt;
}

inline void ColumnInfo::relativeColWidthFactor(int colWidFactor)
{
  fColWidthFactor = colWidFactor;
}

inline unsigned ColumnInfo::rowsPerExtent()
{
  return fRowsPerExtent;
}

template <typename T>
inline void ColumnInfo::updateCPInfo(RID lastInputRow, T minVal, T maxVal, ColDataType colDataType, int width)
{
  fColExtInf->addOrUpdateEntry(lastInputRow, minVal, maxVal, colDataType, width);
}

}  // namespace WriteEngine