# Makefile.in generated by automake 1.15 from Makefile.am. # Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # Copyright (C) 2014 InfiniDB, Inc. # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License # as published by the Free Software Foundation; version 2 of # the License. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301, USA. # $Id$ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/columnstore pkgincludedir = $(includedir)/columnstore pkglibdir = $(libdir)/columnstore pkglibexecdir = $(libexecdir)/columnstore am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = x86_64-pc-linux-gnu host_triplet = x86_64-pc-linux-gnu subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ $(am__configure_deps) $(am__DIST_COMMON) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_$(V)) am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY)) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_$(V)) am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_$(V)) am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ $(LISP)config.h.in # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags CSCOPE = cscope AM_RECURSIVE_TARGETS = cscope am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in AUTHORS \ COPYING ChangeLog INSTALL NEWS README compile config.guess \ config.sub depcomp install-sh ltmain.sh missing DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best DIST_TARGETS = dist-gzip distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print ACLOCAL = ${SHELL} /home/builder/mariadb-columnstore-server/mariadb-columnstore-engine/missing aclocal-1.15 ALLOCA = AMTAR = $${TAR-tar} AM_DEFAULT_VERBOSITY = 1 AR = ar AUTOCONF = ${SHELL} /home/builder/mariadb-columnstore-server/mariadb-columnstore-engine/missing autoconf AUTOHEADER = ${SHELL} /home/builder/mariadb-columnstore-server/mariadb-columnstore-engine/missing autoheader AUTOMAKE = ${SHELL} /home/builder/mariadb-columnstore-server/mariadb-columnstore-engine/missing automake-1.15 AWK = mawk CC = gcc CCDEPMODE = depmode=gcc3 CFLAGS = CPP = gcc -E CPPFLAGS = CXX = g++ CXXCPP = g++ -E CXXDEPMODE = depmode=gcc3 CXXFLAGS = CYGPATH_W = echo DEFS = -DHAVE_CONFIG_H DEPDIR = .deps DLLTOOL = false DSYMUTIL = DUMPBIN = ECHO_C = ECHO_N = -n ECHO_T = EGREP = /bin/grep -E EXEEXT = FGREP = /bin/grep -F GREP = /bin/grep INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LD = /usr/bin/ld -m elf_x86_64 LDFLAGS = LEX = flex LEXLIB = LEX_OUTPUT_ROOT = lex.yy LIBOBJS = LIBS = LIBTOOL = $(SHELL) $(top_builddir)/libtool LIPO = LN_S = ln -s LTLIBOBJS = LT_SYS_LIBRARY_PATH = MAKEINFO = ${SHELL} /home/builder/mariadb-columnstore-server/mariadb-columnstore-engine/missing makeinfo MANIFEST_TOOL = : MKDIR_P = /bin/mkdir -p NM = /usr/bin/nm -B NMEDIT = OBJDUMP = objdump OBJEXT = o OTOOL = OTOOL64 = PACKAGE = columnstore PACKAGE_BUGREPORT = support@mariadb.com PACKAGE_NAME = columnstore PACKAGE_STRING = columnstore 1.0.2 PACKAGE_TARNAME = columnstore PACKAGE_URL = PACKAGE_VERSION = 1.0.2 PATH_SEPARATOR = : POW_LIB = RANLIB = ranlib SED = /bin/sed SET_MAKE = SHELL = /bin/bash STRIP = strip VERSION = 1.0.2 XML2_CONFIG = /usr/bin/xml2-config XML_CPPFLAGS = -I/usr/include/libxml2 XML_LIBS = -lxml2 YACC = bison -y YFLAGS = abs_builddir = /home/builder/mariadb-columnstore-server/mariadb-columnstore-engine abs_srcdir = /home/builder/mariadb-columnstore-server/mariadb-columnstore-engine abs_top_builddir = /home/builder/mariadb-columnstore-server/mariadb-columnstore-engine abs_top_srcdir = /home/builder/mariadb-columnstore-server/mariadb-columnstore-engine ac_ct_AR = ar ac_ct_CC = gcc ac_ct_CXX = g++ ac_ct_DUMPBIN = am__include = include am__leading_dot = . am__quote = am__tar = $${TAR-tar} chof - "$$tardir" am__untar = $${TAR-tar} xf - bindir = ${idbinstall}/bin build = x86_64-pc-linux-gnu build_alias = build_cpu = x86_64 build_os = linux-gnu build_vendor = pc builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} etcdir = ${idbinstall}/etc exec_prefix = ${prefix} host = x86_64-pc-linux-gnu host_alias = host_cpu = x86_64 host_os = linux-gnu host_vendor = pc htmldir = ${docdir} idb_brm_libs = ${abs_top_builddir}/versioning/BRM/libbrm.la ${abs_top_builddir}/utils/idbdatafile/libidbdatafile.la ${abs_top_builddir}/utils/cacheutils/libcacheutils.la ${abs_top_builddir}/utils/rwlock/librwlock.la ${idb_oam_libs} ${idb_common_libs} idb_cflags = -g0 -O3 -fno-strict-aliasing -Wall idb_common_includes = -I${abs_top_builddir}/utils/libxml -I${abs_top_builddir}/utils/messageqcpp -I${abs_top_builddir}/writeengine/shared -I${abs_top_builddir}/utils/idbdatafile -I${abs_top_builddir}/utils/loggingcpp -I${abs_top_builddir}/utils/configcpp -I${abs_top_builddir}/utils/compress -I${abs_top_builddir}/versioning/BRM -I${abs_top_builddir}/utils/rowgroup -I${abs_top_builddir}/utils/common -I${abs_top_builddir}/utils/dataconvert -I${abs_top_builddir}/utils/rwlock -I${abs_top_builddir}/utils/funcexp -I${abs_top_builddir}/snmpd/snmpmanager -I${abs_top_builddir}/utils -I${abs_top_builddir}/oam/oamcpp -I${abs_top_builddir}/dbcon/ddlpackageproc -I${abs_top_builddir}/dbcon/ddlpackage -I${abs_top_builddir}/dbcon/execplan -I${abs_top_builddir}/utils/startup -I${abs_top_builddir}/dbcon/joblist -I${abs_top_builddir}/writeengine/wrapper -I${abs_top_builddir}/writeengine/server -I${abs_top_builddir}/dbcon/dmlpackage -I${abs_top_builddir}/writeengine/client -I${abs_top_builddir}/dbcon/dmlpackageproc -I${abs_top_builddir}/utils/cacheutils -I${abs_top_builddir}/utils/mysqlcl_idb -I${abs_top_builddir}/utils/querytele -I${abs_top_builddir}/utils/boost_idb -I${abs_top_builddir}/utils/thrift -I${abs_top_builddir}/utils/joiner -I${abs_top_builddir}/utils/threadpool -I${abs_top_builddir}/utils/batchloader -I${abs_top_builddir}/utils/ddlcleanup -I${abs_top_builddir}/utils/querystats -I${abs_top_builddir}/writeengine/xml -I${abs_top_builddir}/../../../sql -I${abs_top_builddir}/../../../include -I${abs_top_builddir}/../../../pcre -I${abs_top_builddir}/../sql -I${abs_top_builddir}/../include -I${abs_top_builddir}/../pcre -I${abs_top_builddir}/net-snmp/net-snmp -I${abs_top_builddir}/net-snmp/net-snmp/include -I${abs_top_builddir}/snmpd/snmpmanager idb_common_ldflags = idb_common_libs = ${abs_top_builddir}/utils/messageqcpp/libmessageqcpp.la ${abs_top_builddir}/utils/loggingcpp/libloggingcpp.la ${abs_top_builddir}/utils/configcpp/libconfigcpp.la ${abs_top_builddir}/utils/startup/libidbboot.a ${abs_top_builddir}/utils/boost_idb/libboost_idb.la -lxml2 -lpthread -lrt idb_cppflags = idb_cxxflags = -g0 -O3 -fno-strict-aliasing -Wall idb_exec_libs = ${abs_top_builddir}/dbcon/joblist/libjoblist.la ${abs_top_builddir}/dbcon/execplan/libexecplan.la ${abs_top_builddir}/utils/windowfunction/libwindowfunction.la ${abs_top_builddir}/utils/joiner/libjoiner.la ${abs_top_builddir}/utils/rowgroup/librowgroup.la ${abs_top_builddir}/utils/funcexp/libfuncexp.la ${abs_top_builddir}/utils/udfsdk/libudfsdk.la ${abs_top_builddir}/utils/dataconvert/libdataconvert.la ${abs_top_builddir}/utils/common/libcommon.la ${abs_top_builddir}/utils/compress/libcompress.la ${abs_top_builddir}/utils/mysqlcl_idb/libmysqlcl_idb.la ${abs_top_builddir}/utils/querystats/libquerystats.la ${abs_top_builddir}/utils/querytele/libquerytele.la ${abs_top_builddir}/utils/thrift/libthrift.la ${abs_top_builddir}/utils/threadpool/libthreadpool.la ${idb_brm_libs} idb_ldflags = -Wl,--rpath -Wl,${idbinstall}/lib -Wl,--no-as-needed -Wl,--add-needed idb_oam_libs = ${abs_top_builddir}/oam/oamcpp/liboamcpp.la ${abs_top_builddir}/snmpd/snmpmanager/libsnmpmanager.la ${netsnmp_libs} idb_write_libs = ${abs_top_builddir}/dbcon/ddlpackageproc/libddlpackageproc.la ${abs_top_builddir}/dbcon/ddlpackage/libddlpackage.la ${abs_top_builddir}/dbcon/dmlpackageproc/libdmlpackageproc.la ${abs_top_builddir}/dbcon/dmlpackage/libdmlpackage.la ${abs_top_builddir}/writeengine/wrapper/libwriteengine.la ${abs_top_builddir}/writeengine/client/libwriteengineclient.la ${abs_top_builddir}/utils/idbdatafile/libidbdatafile.la ${abs_top_builddir}/utils/cacheutils/libcacheutils.la ${idb_exec_libs} idbinstall = ${prefix} includedir = ${idbinstall}/include infodir = ${datarootdir}/info install_sh = ${SHELL} /home/builder/mariadb-columnstore-server/mariadb-columnstore-engine/install-sh libdir = ${idbinstall}/lib libexecdir = ${exec_prefix}/libexec localdir = ${idbinstall}/local localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = ${idbinstall}/man march_flags = mibdir = ${idbinstall}/share/snmp/mibs mkdir_p = $(MKDIR_P) mysqldir = ${idbinstall}/mysql netsnmp_libs = -L${abs_top_builddir}/net-snmp/net-snmp/snmplib/.libs -L${abs_top_builddir}/net-snmp/net-snmp/agent/helpers/.libs -L${abs_top_builddir}/net-snmp/net-snmp/agent/.libs/ -L${abs_top_builddir}/net-snmp/net-snmp/apps/.libs/ -lnetsnmpmibs -lnetsnmpagent -lnetsnmp -lnetsnmpmibs -lnetsnmphelpers oldincludedir = /usr/include pdfdir = ${docdir} postdir = ${idbinstall}/post prefix = /usr/local/mariadb/columnstore program_transform_name = s,x,x, psdir = ${docdir} runstatedir = ${localstatedir}/run sbindir = ${idbinstall}/sbin sharedir = ${idbinstall}/share sharedstatedir = ${prefix}/com srcdir = . sysconfdir = ${idbinstall}/etc target_alias = toolsdir = ${idbinstall}/tools top_build_prefix = top_builddir = . top_srcdir = . ACLOCAL_AMFLAGS = -I m4 # FIXME: # this sets the local linker path (-rpath) so that the ColumnStore # libraries and binaries know where to look for the necessary # libraries. This is almost certainly a wrong approach, as # MySQL should look in the plugin path for libraries, but that # path comes from CMake, not from autotools. For now, until # the ColumnStore engine is integrated with CMake into the # MariaDB server, the prefix must be set the same for the # MariaDB compilation and the engine compilation. I can't see # a way around that for now. # # FIXME: # a second problem here is that this manually specifies # the realtime library and a custom boost library. These # should be detected and used automatically by the autotools # process. A custom boost library should not be needed # either. The system boost should be used. I am not aware if # there are changes made to this custom boost, so I am leaving # this AS IS for now. AM_LIBTOOLFLAGS = -Wl,-rpath -Wl,$(prefix)/lib -lrt -lboost_idb all: config.h $(MAKE) $(AM_MAKEFLAGS) all-am .SUFFIXES: am--refresh: Makefile @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @test -f $@ || rm -f stamp-h1 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-am TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-am CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-am cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-tarZ: distdir @echo WARNING: "Support for distribution archives compressed with" \ "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir @echo WARNING: "Support for shar distribution archives is" \ "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build/sub \ && ../../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ --srcdir=../.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-am all-am: Makefile config.h all-local installdirs: install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: .MAKE: all install-am install-strip .PHONY: CTAGS GTAGS TAGS all all-am all-local am--refresh check \ check-am clean clean-cscope clean-generic clean-libtool cscope \ cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \ distcheck distclean distclean-generic distclean-hdr \ distclean-libtool distclean-tags distcleancheck distdir \ distuninstallcheck dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-am uninstall uninstall-am .PRECIOUS: Makefile .PHONY: test coverage leakcheck docs bootstrap install net-snmp-install net-snmp/net-snmp-5.7.3/agent/.libs/libnetsnmpmibs.so: cd net-snmp/net-snmp; \ ./configure --prefix=$(prefix) --with-mib-modules=disman/event-mib --with-cc=gcc \ --with-logfile=$(prefix)/log/snmpd.log \ --with-sys-location=Unknown \ --with-sys-contact=root@localhost.localdomain \ --with-default-snmp-version=3 \ --with-persistent-directory=$(prefix)var/net-snmp \ --without-openssl \ --with-ldflags="-Wl,-rpath -Wl,$(prefix)/lib"; \ $(MAKE) all-local: net-snmp/net-snmp-5.7.3/agent/.libs/libnetsnmpmibs.so $(MAKE) -C utils $(MAKE) -C oam/oamcpp $(MAKE) -C snmpd $(MAKE) -C dbcon/execplan $(MAKE) -C dbcon/joblist $(MAKE) -C versioning $(MAKE) -C oam $(MAKE) -C versioning dbrm tools $(MAKE) -C writeengine/wrapper $(MAKE) -C writeengine/client $(MAKE) -C writeengine/xml $(MAKE) -C writeengine/redistribute $(MAKE) -C dbcon/ddlpackage $(MAKE) -C dbcon/ddlpackageproc $(MAKE) -C dbcon/dmlpackage $(MAKE) -C dbcon/dmlpackageproc $(MAKE) -C dbcon $(MAKE) -C exemgr $(MAKE) -C ddlproc $(MAKE) -C dmlproc $(MAKE) -C procmon $(MAKE) -C procmgr $(MAKE) -C oamapps $(MAKE) -C decomsvr $(MAKE) -C primitives $(MAKE) -C tools $(MAKE) -C writeengine/server $(MAKE) -C writeengine/bulk $(MAKE) -C writeengine/splitter echo $(idb_cxxflags) $(CXXFLAGS) $(DEBUG_FLAGS) > buildFlags net-snmp-install: $(MAKE) -C net-snmp install install: net-snmp-install $(MAKE) -C utils install $(MAKE) -C oam/oamcpp install $(MAKE) -C snmpd install $(MAKE) -C dbcon/execplan install $(MAKE) -C dbcon/joblist install $(MAKE) -C versioning install $(MAKE) -C oam install $(MAKE) -C versioning dbrm tools install $(MAKE) -C writeengine/wrapper install $(MAKE) -C writeengine/client install $(MAKE) -C writeengine/xml install $(MAKE) -C writeengine/redistribute install $(MAKE) -C dbcon/ddlpackage install $(MAKE) -C dbcon/ddlpackageproc install $(MAKE) -C dbcon/dmlpackage install $(MAKE) -C dbcon/dmlpackageproc install $(MAKE) -C dbcon install $(MAKE) -C exemgr install $(MAKE) -C ddlproc install $(MAKE) -C dmlproc install $(MAKE) -C procmon install $(MAKE) -C procmgr install $(MAKE) -C oamapps install $(MAKE) -C decomsvr install $(MAKE) -C primitives install $(MAKE) -C tools install $(MAKE) -C writeengine/server install $(MAKE) -C writeengine/bulk install $(MAKE) -C writeengine/splitter install compile: all-local test: coverage: leakcheck: docs: clean: rm -f net-snmp.built; \ find . -name \*.d.* -o -name \*.so -o -name \*.a -o -name \*.o -o -name \*.lib -o -name \*.sa -o -name \*.lo -o -name \*.la -exec rm {} \; -print # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: