Sometimes server assigns DOUBLE type for arithmetic operations over
DECIMAL arguments. In this rare case width of result was incorrectly
adjusted and it triggered an assertion.
Now width of result gets adjusted only if result type is also DECIMAL.
This changeset enables quick (mariadb -q) mode when columnstore is
installed. Quick mode precludes client CLI program from storing too
much data in memory, preventing out of memory conditions.
Add quick-max-column-width=0 to prevent extra garbage dashes in output.
This patch introduces an internal aggregate operator SELECT_SOME that
is automatically added to columns that are not in GROUP BY. It
"computes" some plausible value of the column (actually, last one
passed).
Along the way it fixes incorrect handling of HAVING being transferred
into WHERE, window function handling and a bit of other inconsistencies.
This changeset enables quick (mariadb -q) mode when columnstore is
installed. Quick mode precludes client CLI program from storing too
much data in memory, preventing out of memory conditions.
* MCOL-5328: PCRE based regexp regexp_substr regexp_instr regexp_replace
* Add qa test for MCOL-5328
---------
Co-authored-by: Susil Behera <susil.behera@mariadb.com>
1. Extend the following CalpontSystemCatalog member functions to
set CalpontSystemCatalog::ColType::charsetNumber, after the
system catalog update to add charset number to calpontsys.syscolumn
in MCOL-5005:
CalpontSystemCatalog::lookupOID
CalpontSystemCatalog::colType
CalpontSystemCatalog::columnRIDs
CalpontSystemCatalog::getSchemaInfo
2. Update cpimport to use the CHARSET_INFO object associated with the
charset number retrieved from the system catalog, for a
dictionary/non-dictionary CHAR/VARCHAR/TEXT column, to truncate
long strings that exceed the target column character length.
3. Add MTR test cases.
* Added order by clause to keep results consistent over test runs
* Updated test result for the merging of MCOL-5519
* Updated test results for the merging of MCOL-4632
* Updated test result for the merging of MCOL-5519
* Added missing / to path
* Improved few tests cases
* Fixed test case name
---------
Co-authored-by: root <root@rocky8.localdomain>
Remove redundant cast.
As C-style casts with a type name in parantheses are interpreted as static_casts this literally just changes the interpretation around (and forces an implicit cast to match the return value of the function).
Switch UBIGINTNULL and UBIGINTEMPTYROW constants for consistency.
Make consistent with relation between BIGINTNULL and BIGINTEMPTYROW & make adapted cast behaviour due to NULL markers more intuitive. (After this change we can simply block the highest possible uint64_t value and if a cast results in it, print the next lower value (2^64 - 2). Previously, (2^64 - 1) was able to be printed, but (2^64 - 2) as being blocked by the UBIGINTNULL constant was not, making finding the appropiate replacement value to give out more confusing.
Introduce MAX_MCS_UBIGINT and MIN_MCS_BIGINT and adapt casts.
Adapt casting to BIGINT to remove NULL marker error.
Add bugfix regression test for MCOL 4632
Add regression test for mcol_4648
Revert "Switch UBIGINTNULL and UBIGINTEMPTYROW constants for consistency."
This reverts commit 83eac11b18937ecb0b4c754dd48e4cb47310f620.
Due to backwards compatability issues.
Refactor casting to MCS[U]Int to datatype functions.
Update regression tests to include other affected datatypes.
Apply formatting.
Refactor according to PR review
Remove redundant new constant, switch to using already existing constant.
Adapt nullstring casting to EMPTYROW markers for backwards compatability.
Adapt tests for backward compatability behaviour allowing text datatypes to be casted to EMPTYROW constant.
Adapt mcol641-functions test according to bug fix.
Update tests according to new expected behaviour.
Adapt tests to new understanding of issue.
Update comments/documentation for MCOL_4632 test.
Adapt to new cast limit logic.
Make bracketing consistent.
Adapt previous regression test to new expected behaviour.
This patch:
1. Properly processes situation when pm join result count is exceeded.
2. Adds session variable 'columnstore_max_pm_join_result_count` to control the limit.
Internal memory representation of MEDIUMINT datatype uses 24 bits. This is
true for both MariaDB server as well as ColumnStore. MCS plugin code uses
TypeHandlerSInt24 and TypeHandlerUInt24 classes to respectively convert the
binary representation of the signed and unsigned MEDIUMINT values passed by
the server to the plugin. The plugin then outputs the text representation
of these values into an open file descriptor which is piped to cpimport
for the final load into the MCS db files.
The TypeHandlerXInt24 classes were earlier incorrectly using
WriteBatchField::ColWriteBatchXInt32() functions which operate on a 4 byte
buffer. This resulted in incorrect parsing of MEDIUMINT values. As a fix,
we implement WriteBatchField::ColWriteBatchXInt24() functions which
correctly handle the 24 bit input buffer used for MEDIUMINT datatype.
For the following query:
select item from (
select item from (select a as item from t1) tt
union all
select item from (select a as item from t1) tt
) ttt;
There is an if predicate in buildSimpleColFromDerivedTable() that compares
the outermost query field name (ttt.item) to the returned column list of
the inner query (tt.item) when building the returned column list of the
outer most query. In the above query example, the inner query field name
is an alias set in the inner most query and is set to "`tt`.`item`",
while the outermost query field name is set to "item". The use of
backticks "`" in the inner query alias is causing the execution to
not enter the if block which creates the SimpleColumn for the outermost
query field name. As a fix, we strip off the backticks from the inner
query alias.
This patch fixes a wrong `join id` assignment for `TupleHashJoinStep` in a view.
After MCOL-334 CS assigns a '-1' as `join id` for `TupleHashJoinStep` in a view, and
in this case we cannot apply a filter for specific `Join step`, which is associated with `join id`
for 2 reasons:
1. Filters for all `TupleHashJoinSteps` associated with the same `join id`, which is '-1'.
2. When CS creates a `joinIdIndexMap` it eliminates all `join ids` which a less or equal 0.
This patch also fixes some tests for the view, which were generated wrong results.
* MCOL-5074 CASE with IN and aggregate asserts
gwip-scsp wasn't set and buildPredicateItem() was called which assumes it is set. Added code to set properly in this case
The idea is relatively simple - encode prefixes of collated strings as
integers and use them to compute extents' ranges. Then we can eliminate
extents with strings.
The actual patch does have all the code there but miss one important
step: we do not keep collation index, we keep charset index. Because of
this, some of the tests in the bugfix suite fail and thus main
functionality is turned off.
The reason of this patch to be put into PR at all is that it contains
changes that made CHAR/VARCHAR columns unsigned. This change is needed in
vectorization work.
on a non-ColumnStore table does not work.
As part of MCOL-4617, we moved the in-to-exists predicate creation
and injection from the server into the engine. However, when query
with an IN Subquery contains a non-ColumnStore table, the server
still performs the in-to-exists predicate transformation for the
foreign engine table. This caused ColumnStore's execution plan to
contain incorrect WHERE predicates. As a fix, we call
mutate_optimizer_flags() for the WRITE lock, in addition to the READ
table lock. And in mutate_optimizer_flags(), we change the optimizer
flag from OPTIMIZER_SWITCH_IN_TO_EXISTS to OPTIMIZER_SWITCH_MATERIALIZATION.
wide decimal column in a non-ColumnStore table throws an exception.
ROW::getSignedNullValue() method does not support wide decimal fields
yet. To fix this exception, we remove the call to this method from
CrossEngineStep::setField().
After an AggreateColumn corresponding to SUM(1+1) is created,
it is pushed to the list:
gwi.count_asterisk_list.push_back(ac)
Later, in getSelectPlan(), the expression SUM(1+1) was erroneously
treated as a constant:
if (!hasNonSupportItem && !nonConstFunc(ifp) && !(parseInfo & AF_BIT) && tmpVec.size() == 0)
{
srcp.reset(buildReturnedColumn(item, gwi, gwi.fatalParseError));
This code freed the original AggregateColumn and replaced to a ConstantColumn.
But gwi.count_asterisk_list still pointer to the freed AggregateColumn().
The expression SUM(1+1) was treated as a constant because tmpVec
was empty due to a bug in this code:
// special handling for count(*). This should not be treated as constant.
if (isp->argument_count() == 1 &&
( sfitempp[0]->type() == Item::CONST_ITEM &&
(sfitempp[0]->cmp_type() == INT_RESULT ||
sfitempp[0]->cmp_type() == STRING_RESULT ||
sfitempp[0]->cmp_type() == REAL_RESULT ||
sfitempp[0]->cmp_type() == DECIMAL_RESULT)
)
)
{
field_vec.push_back((Item_field*)item); //dummy
Notice, it handles only aggregate functions with explicit literals
passed as an argument, while it does not handle constant expressions
such as 1+1.
Fix:
- Adding new classes ConstantColumnNull, ConstantColumnString,
ConstantColumnNum, ConstantColumnUInt, ConstantColumnSInt,
ConstantColumnReal, ValStrStdString, to reuse the code easier.
- Moving a part of the code from the case branch handling CONST_ITEM
in buildReturnedColumn() into a new function
newConstantColumnNotNullUsingValNativeNoTz(). This
makes the code easier to read and to reuse in the future.
- Adding a new function newConstantColumnMaybeNullFromValStrNoTz().
Removing dulplicate code from !!!four!!! places, using the new
function instead.
- Adding a function isSupportedAggregateWithOneConstArg() to
properly catch all constant expressions. Using the new function parse_item()
in the code commented as "special handling for count(*)".
Now it pushes all constant expressions to field_vec, not only
explicit literals.
- Moving a part of the code from buildAggregateColumn()
to a helper function processAggregateColumnConstArg().
Using processAggregateColumnConstArg() in the CONST_ITEM
and NULL_ITEM branches.
- Adding a new branch in buildReturnedColumn() handling FUNC_ITEM.
If a function has constant arguments, a ConstantColumn() is
immediately created, without going to
buildArithmeticColumn()/buildFunctionColumn().
- Reusing isSupportedAggregateWithOneConstArg()
and processAggregateColumnConstArg() in buildAggregateColumn().
A new branch catches aggregate function has only one constant argument
and immediately creates a single ConstantColumn without
traversing to the argument sub-components.
When an outer query filter accesses an subquery column that contains an aggregate or a window function, certain optimizations can't be performed. We had been looking at the surface of the returned column. We now iterate into any functions or operations looking for aggregates and window functions.
