This patch adds support for `startreadonly` command which waits
until all active cpimport jobs are done and then puts controller node to readonly
mode.
This function iterates over lbidList (populated by an earlier call to
DBRM::getUncommittedExtentLBIDs()) to find those LBIDs which belong to
the AUX column. It then finds the corresponding LBIDs for all other columns
which belong to the same table as the AUX LBID and appends them to lbidList.
The updated lbidList is used by invalidateUncommittedExtentLBIDs() to update
the casual partitioning information.
DBRM::addToLBIDList() only comes into play in case of a transaction ROLLBACK.
EM scaleability project has two parts: phase1 and phase2.
This is phase1 that brings EM index to speed up(from O(n) down
to the speed of boost::unordered_map) EM lookups looking for
<dbroot, oid, partition> tuple to turn it into LBID,
e.g. most bulk insertion meta info operations.
The basis is boost::shared_managed_object where EMIndex is
stored. Whilst it is not debug-friendly it allows to put a
nested structs into shmem. EMIndex has 3 tiers. Top down description:
vector of dbroots, map of oids to partition vectors, partition
vectors that have EM indices.
Separate EM methods now queries index before they do EM run.
EMIndex has a separate shmem file with the fixed id
MCS-shm-00060001.
Progress keep and test commit
Progress keep and test commit
Progress keep and test commit
Again, trying to pinpoint problematic part of a change
Revert "Again, trying to pinpoint problematic part of a change"
This reverts commit 71874e7c0d7e4eeed0c201b12d306b583c07b9e2.
Revert "Progress keep and test commit"
This reverts commit 63c7bc67ae55bdb81433ca58bbd239d6171a1031.
Revert "Progress keep and test commit"
This reverts commit 121c09febd78dacd37158caeab9ac70f65b493df.
Small steps - I walk minefield here
Propagating changes - now CPInfo in convertValArray
Progress keep commit
Restoring old functionality
Progress keep commit
Small steps to avoid/better locate old problem with the write engine.
Progress keeping commit
Thread the CPInfo up to convertValArray call in writeColumnRec
About to test changes - I should get no regression and no updates in
ranges either.
Testing out why I get a regression
Investigating source of regression
Debugging prints
Fix compile error
Debugging print - debug regression
I clearly see calls to writeColumnRec and prints there added to discern
between these.
Fix warning error
Possible culprit
Add forgotten default parameter for convertValArray
New logic to test
Max/min gets updated during value conversion
To test results of updates
Debug logs
Debug logs
An attempt to provide proper sequence index
Debug logs
An attempt to provide proper sequence index - now magic for resetting
Debug logs
Debug logs
Debug logs
Trying to perform correct updates
Trying to perform correct updates - seqNum woes fight
COMMIT after INSERT performs 'mark extent as invalid' operation - investigating
To test: cut setting of CPInfo upon commit from DML processor
It may be superfluous as write engine does that too
Debug logs
Debug logs
Better interface for CPMaxMin
Old interface forgot to set isBinaryColumn field
Possible fix for the problems
I forgot to reassign the value in cpinfoList
Debug logs
Computation of 'binary' column property
logs indicated that it was not set in getExtentCPMaxMin, and it was impossible to compute there so I had to move that into writeengine.
To test: code to allow cross-extent insertion
To test: removed another assertion for probable cause of errors
Debug logs
Dropped excessive logs
Better reset code
Again, trying to fix ordering
Fixing order of rowids for LBID computation
Debug logs
Remove update of second LBID in split insert
I have to validate incorrect behaviour for this test
Restoring the case where everything almost worked
Tracking changes in newly created extents
Progress keeping commit
Fixing build errors with recent server
An ability to get old values from blocks we update
Progress keeping commit
Adding analysis of old values to write engine code.
It is needed for updates and deletes.
Progress keeping commit
Moving max/min range update from convertValArray into separate function with simpler logic.
To test and debug - logic is there
Fix build errors
Update logic to debug
There is a suspicious write engine method updateColumnRecs which
receives a vector of column types but does not iterate over them
(otherwise it will be identical to updateColumnRec in logic).
Other than that, the updateColumnRec looks like the center of all
updates - deleteRow calls it, for example, dml processor also calls it.
Debug logs for insert bookkeeping regression
Set up operation type in externally-callable interface
Internal operations depend on the operation type and consistency is what matters there.
Debug logs
Fix for extent range update failure during update operation
Fix build error
Debug logs
Fix for update on deletion
I am not completely sure in it - to debug.
Debug log
writeColumnRec cannot set m_opType to UPDATE unconditionally
It is called from deleteRow
Better diagnostics
Debug logs
Fixed search condition
Debug logs
Debugging invalid LBID appearance
Debug logs - fixed condition
Fix problems with std::vector reallocation during growth
Fix growing std::vector data dangling access error
Still fixing indexing errors
Make in-range update to work
Correct sequence numbers
Debug logs
Debug logs
Remove range drop from DML part of write engine
A hack to test the culprit of range non-keeping
Tests - no results for now
MTR-style comments
Empty test results
To be filled with actual results.
Special database and result selects for all tests
Pleasing MTR with better folder name
Pleasing MTR - testing test result comparison
Pleasing MTR by disabling warnings
All test results
Cleaning up result files
Reset ranges before update
Remove comments from results - point of failure in MTR
Remove empty line from result - another MTR failure point
Probably fix for deletes
Possible fix for remaining failed delete test
Fix a bug in writeRows
It should not affect delete-with-range test case, yet it is a bug.
Debug logs
Debug logs
Tests reorganization and description
Support for unsigned integer for new tests
Fix type omission
Fix test failure due to warnings on clean installation
Support for bigint to test
Fix for failed signed bigint test
Set proper unsignedness flag
Removed that assignment during refactoring.
Tests for types with column width 1 and 2
Support for types in new tests
Remove trailing empty lines from results
Tests had failed because of extra empty lines.
Remove debug logs
Update README with info about new tests
Move tests for easier testing
Add task tag to tests
Fix invalid unsaigned range check
Fix for signed types
Fix regressions - progress keeping commit
Do not set invalid ranges into valid state
A possible fix for mcs81_self_join test
MCOL 2044 test database cleanup
Missing expected results
Delete extraneous assignment to m_opType
nullptr instead of NULL
Refactor extended CPInfo with TypeHandler
Better handling of ranges - safer types, less copy-paste
Fix logic error related to typo
Fix logic error related to typo
Trying to figure out why invalid ranges aren't displayed as NULL..NULL
Debug logs
Debug logs
Debug logs
Debug logs for worker node
Debug logs for worker node in extent map
Debugging virtual table fill operation
Debugging virtual table fill operation
Fix for invalid range computation
Remove debug logs
Change handling of invalid ranges
They are also set, but to invalid state.
Complete change
Fix typo
Remove unused code
"Fix" for tests - -1..0 instead of NULL..NULL for invalid unsigned ranges
Not a good change, yet I cannot do better for now.
MTR output requires tabs instead of spaces
Debug logs
Debug logs
Debug logs - fix build
Debug logs and logic error fix
Fix for clearly incorrect firstLBID in CPInfo being set - to test
Fix for system catalog operations suppot
Better interface to fix build errors
Delete tests we cannot satisfy due to extent rescan due to WHERE
Tests for wide decimals
Testing support for wide decimals
Fix for wide decimals tests
Fix for delete within range
Memory leak fix and, possible, double free fix
Dispatch on CalpontSystemCatalog::ColDataType is more robust
Add support for forgotten MEDINT type
Add forgottent BIGINT
empty() instead of size() > 0
Better layout
Remove confusing comment
Sensible names for special values of seqNum field
Tests for wide decimal support
Addressing concerns of drrtuy
Remove test we cannot satisfy
Final touches for PR
Remove unused result file
For now it consists of only:
using int128_t = __int128;
using uint128_t = unsigned __int128;
All new privitive data types should go into this file in the future.
This commit also adds support in TupleHashJoinStep::forwardCPData,
although we currently do not support wide decimals as join keys.
Row estimation to determine large-side of the join is also updated.
If the plugin is restarted after the system is running, it's possible to have stale references to shared memory. This patch deletes those references so the next time they're used, just-in-time initialization will get the latest.
1) Instead of making dbrm calls to writeVBEntry() per block,
we make these calls per batch. This can have non-trivial
reductions in the overhead of these calls if the batch size
is large.
2) In dmlproc, do not deserialize the whole insertpackage, which
consists of the complete record set per column, which would be
wasteful as we only need some metadata fields from insertpackage
here. This is only done for batch inserts at the moment, this
should also be applied to single inserts.
DBRM connections are reused so that we don't have a huge amount of
TIME_WAIT sockets when there are large amounts of DML. Also applied to
i_s.columnstore_files
