* Add generic methods to save some casts, and fix lint
* Update current and oldest pinning
* Fix classes
* Remove some todos thanks to josepy 1.11.0
* Cleanup some useless pylint disable
* Finish complete typing
* Better TypeVar names
* Upgrade pinning and fix some typing errors
* Use protocol
* Fix types in apache
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
* Fix some typos (found by codespell)
Signed-off-by: Stefan Weil <sw@weilnetz.de>
* Remove typo fixes for some files which should not be modified
Signed-off-by: Stefan Weil <sw@weilnetz.de>
In the apache2 package on Debian-based distros, the default
000-default.conf virtual host does not include a ServerName.
Depending on the FQDN hostname of the machine and DNS setup, Apache
assigns a name to this unnamed vhost at runtime. As a result, the
Apache config end up with vhosts that have duplicative names.
Previously, Certbot did not identify that the nameless vhost could be
a match for the requested identifier, which would, depending on
configuration load order, cause the authenticator to fail.
This change causes Certbot to include all unnamed vhosts on top of
matched vhosts, during authentication. If no vhosts matched, the
existing behavior remains the same.
* apache: configure nameless vhosts during auth
* vhost is only unnamed if ServerName is not set
* also fix test to only match ServerName
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
This is one of the things that newer versions of `pylint` complains about.
* git grep -l super\( | xargs sed -i 's/super([^)]*)/super()/g'
* fix spacing
Fixes#8427
This PR converts the Python 2 types hints into Python 3 types annotations. I have used the project https://github.com/ilevkivskyi/com2ann which has been designed for that specific purpose and did that very well.
The only remaining things to do were to fix broken type hints that became wrong code after migration, and to fix lines too long with the new syntax.
* Raw execution of com2ann
* Fixing broken type annotations
* Cleanup imports
This PR gets its root from an observation I did on current version of Certbot (1.3.0): the `renewal-hooks` directory in Certbot configuration directory is created on Windows with write permissions to everybody.
I thought it was a critical bug since this directory contains hooks that are executed by Certbot, and you certainly do not want this folder to be open to any malicious hook that could be inserted by everyone, then executed with administrator privileges by Certbot.
Turns out for this specific problem that the bug is not critical for the hooks, because the scripts are expected to be in subdirectories of `renewal-hooks` (namely `pre`, `post` and `deploy`), and these subdirectories have proper permissions because we set them explicitly when Certbot is starting.
Still, there is a divergence here between Linux and Windows: on Linux all Certbot directories without explicit permissions have at maximum `0o755` permissions by default, while on Windows it is a `0o777` equivalent. It is not an immediate security risk, but it is definitly error-prone, not expected, and so a potential breach in the future if we forget about it.
Root cause is that umask is not existing in Windows. Indeed under Linux the umask defines the default permissions when you create a file or a directory. Python takes that into account, with an API for `os.open` and `os.mkdir` that expose a `mode` parameter with default value of `0o777`. In practice it is never `0o777` (either you the the `mode` explictly or left the default one) because the effective mode is masked by the current umask value in the system: on Linux it is `0o022`, so files/directories have a maximum mode of `0o755` if you did not set the umask explicitly, and it is what it is observed for Certbot.
However on Windows, the `mode` value passed (and got from default) to the `open` and `mkdir` of `certbot.compat.filesystem` module is taken verbatim, since umask does not exit, and then is used to calculate the DACL of the newly created file/directory. So if the mode is not set explicitly, we end up with files and directories with `0o777` permissions.
This PR fixes this problem by implementing a umask behavior in the `certbot.compat.filesystem` module, that will be applied to any file or directory created by Certbot since we forbid to use the `os` module directly.
The implementation is quite straight-forward. For Linux the behavior is not changed. On Windows a `mask` parameter is added to the function that calculates the DACL, to be invoked appropriately when file or directory are created. The actual value of the mask is taken from an internal class of the `filesystem` module: its default value is `0o755` to match default umasks on Linux, and can be changed with the new method `umask` that have the same behavior than the original `os.umask`. Of course `os.umask` becomes a forbidden function and `filesystem.umask` must be used instead.
Existing code that is impacted have been updated, and new unit tests are created for this new function.
* Implement umask for Windows
* Set umask at the beginning of tests
* Fix lint, update local oldest requirements
* Update certbot-apache/setup.py
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
* Improve tests
* Adapt filesystem.makedirs for Windows
* Fix
* Update certbot-apache/setup.py
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
* Changelog entries
* Fix lint
* Update certbot/CHANGELOG.md
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
As pylint is evolving, it improves its accuracy, and several pylint error suppression (`# pylint: disable=ERROR) added in certbot codebase months or years ago are not needed anymore to make it happy.
There is a (disabled by default) pylint error to detect the useless suppressions (pylint-ception: `useless-suppression`). It is not working perfectly (it has also false-positives ...) but it is a good start to clean the codebase.
This PR removes several of these useless suppressions as detected by the current pylint version we use.
* Remove useless suppress
* Remove useless lines
Part of #7550
This PR makes appropriate corrections to run pylint on Python 3.
Why not keeping the dependencies unchanged and just run pylint on Python 3?
Because the old version of pylint breaks horribly on Python 3 because of unsupported version of astroid.
Why updating pylint + astroid to the latest version ?
Because this version only fixes some internal errors occuring during the lint of Certbot code, and is also ready to run gracefully on Python 3.8.
Why upgrading mypy ?
Because the old version does not support the new version of astroid required to run pylint correctly.
Why not upgrading mypy to its latest version ?
Because this latest version includes a new typshed version, that adds a lot of new type definitions, and brings dozens of new errors on the Certbot codebase. I would like to fix that in a future PR.
That said so, the work has been to find the correct set of new dependency versions, then configure pylint for sane configuration errors in our situation, disable irrelevant lintings errors, then fixing (or ignoring for good reason) the remaining mypy errors.
I also made PyLint and MyPy checks run correctly on Windows.
* Start configuration
* Reconfigure travis
* Suspend a check specific to python 3. Start fixing code.
* Repair call_args
* Fix return + elif lints
* Reconfigure development to run mainly on python3
* Remove incompatible Python 3.4 jobs
* Suspend pylint in some assertions
* Remove pylint in dev
* Take first mypy that supports typed-ast>=1.4.0 to limit the migration path
* Various return + else lint errors
* Find a set of deps that is working with current mypy version
* Update local oldest requirements
* Remove all current pylint errors
* Rebuild letsencrypt-auto
* Update mypy to fix pylint with new astroid version, and fix mypy issues
* Explain type: ignore
* Reconfigure tox, fix none path
* Simplify pinning
* Remove useless directive
* Remove debugging code
* Remove continue
* Update requirements
* Disable unsubscriptable-object check
* Disable one check, enabling two more
* Plug certbot dev version for oldest requirements
* Remove useless disable directives
* Remove useless no-member disable
* Remove no-else-* checks. Use elif in symetric branches.
* Add back assertion
* Add new line
* Remove unused pylint disable
* Remove other pylint disable
