* add some missing types
* install pkg-config
* install pkg-config for docker too
* add pkg-config to plugins
* pkg-config when cryptography may need to be built
* deps cleanup
* more comments
* more tweaks
Fixes https://github.com/certbot/certbot/issues/7921.
In all cases when we run `pip_install.py`, we first run `pipstrap.py`. This PR combines these two steps for convenience and to make always doing that less error prone. This will also help me with some of the `tox.ini` refactoring I'm planning to do.
I ran the full test suite on everything and tested the release script changes locally.
This change shouldn't have any effect on cryptography's setup because they install `certbot[test]` which depends on pip, setuptools, and wheel.
* always pipstrap
* use pip_install.py during releases
* generate multiarch images for non-architecture tags
* lock docker build to legacy docker buider, and bugfix
* rename deploy.sh to deploy_by_arch.sh
* Update documentation related to multiarch Docker
* Consistent IFS value with respect to other scripts
Co-authored-by: humanoid2050 <humanoid2050@monolith>
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
This PR:
* Deletes the 2.0 pre-release pipeline
* Causes 1.x releases to be released to Docker Hub without updating the latest tag, PyPI, and the candidate and stable channels of the snap store
* Causes 2.x releases to be released to Docker Hub, PyPI, the beta channel of the snap store, and our Windows installer
We could potentially look into how to continue to do 1.x Windows installer releases through GitHub releases and tech ops tooling, but I personally don't think it's worth it right now.
This PR DOES NOT do anything about progressive snap releases. I think we can revisit this when/if we decide (how) to do them.
* Upgrade cryptography to 3.4.6
* Fix comment with instructions for how to use hashin
* run tools/rebuild_certbot_constraints.py
* add deps for building cryptography in snaps
* Update cryptography build dependencies for docker
* Update sources for test farm tests
* Remove rust if it's installed for test farm tests
* source bootstrap script and call sudo as needed
Fixes#8256
First let's sum up the problem to solve. We disabled the build isolation available in pip>=19 because it could potential break certbot build without a control on our side. Basically builds are not reproductible. Indeed the build isolation triggers build of PEP-517 enabled transitive dependencies (like `cryptography`) with the build dependencies defined in their `pyproject.toml`. For `cryptography` in particular these requirements include `setuptools>=40.6.0`, and quite logically pip will install the latest version of `setuptools` for the build. And when `setuptools` broke with the version 50, our build did the same.
But disabling the build isolation is not a long term solution, as more and more project will migrate on this approach and it basically provides a lot of benefit in how dependencies are built.
The ideal solution would be to be able to apply version constraints on our side on the build dependencies, in order to pin `setuptools` for instance, and decide precisely when we upgrade to a newer version. However for now pip does not provide a mechanism for that (like a `--build-constraint` flag or propagation of existing `--constraint` flag).
Until I saw https://github.com/pypa/pip/issues/9081 and https://github.com/pypa/pip/issues/8439.
Apart the fact that https://github.com/pypa/pip/issues/9081 shows that pip maintainers are working on this issue, it explains how pip works regarding PEP-517 and infers which workaround can be used to still pin the build dependencies. It turns out that pip invokes itself in each build isolation to install the build dependencies. It means that even if some flags (like `--constraint`) are not explicitly passed to the pip sub call, the global environment remains, in particular the environment variables.
Thus it is known that every pip flag can alternatively be set by environment variable using the following pattern for the variable name: `PIP_[FLAG_NAME_UPPERCASE]`. So for `--constraint`, it is `PIP_CONSTRAINT`. And so you can pass a constraint file to the pip sub call through that mechanism.
I made some tests with a constraint file containing pinning for `setuptools`: indeed under isolation zone, the constraint file has been honored and the provided pinned version has been used to build the dependencies (I tested it with `cryptography`).
Finally this PR takes advantage of this mechanism, by setting `PIP_CONSTRAINT` to `pip_install`, the snap building process, the Dockerfiles and the windows installer building process.
I also extracted out the requirements of the new `pipstrap.py` to be reusable in these various build processes.
* Use workaround to fix build requirements in build isolation, and renable build isolation
* Clean imports in pipstrap
* Externalize pipstrap reqs to be reusable
* Inject pipstrap constraints during pip_install
* Update docker build
* Update snapcraft build
* Prepare installer build
* Fix pipstrap constraints in snap build
* Add back --no-build-cache option in Docker images build
* Update snap/snapcraft.yaml
* Use proper flags with pip
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
* Add a new, simplified version of pipstrap.
* Use tools/pipstrap.py
* Uncomment code
* Refactor pip_install.py and provide hashes.
* Fix test_sdists.sh.
* Make code work on Python 2.
* Call strip_hashes.py using Python 3.
* Pin the oldest version of httplib2 used in distros
* Strip enum34 dependency.
* Remove pip pinnings from dev_constraints.txt
* Correct pipstrap docstring.
* Don't set working_dir twice.
* Add comments
Fixes#8355
During the troubleshooting of #8355, I came to the conclusion that using buildkit was creating the problem. Without it all docker images are built correctly. Initially buildkit was enabled to avoid a building problem in Azure Pipeline, but I also found in my recent tests that this problem was not there anymore.
You can find more details about the troubleshooting and reasoning in #8355.
As a consequence, I disable the usage of buildkit in this PR which will solve the issue.
Fixes https://github.com/certbot/certbot/issues/8022, https://github.com/certbot-docker/certbot-docker/issues/25, and https://github.com/certbot-docker/certbot-docker/issues/20.
This PR builds on https://github.com/certbot/certbot/pull/8192 to set up similar builds in Azure to what we currently have at release time as well as nightly builds allowing us to catch problems in these images before a release. It also fully automates our Docker deployments removing a manual step from our release process. We'll need to update our release instructions once this PR lands.
If you're not familiar with our `certbot-docker` setup, you can read about how these scripts customized the build process on Docker Hub at https://docs.docker.com/docker-hub/builds/advanced/.
You can see the process working properly at:
* Nightly build on my fork: https://dev.azure.com/bmw0523/bmw/_build/results?buildId=345&view=logs&j=70ac378a-cb1f-50d1-b328-169807afbcfa
* Release build on my fork: https://dev.azure.com/bmw0523/bmw/_build/results?buildId=346&view=logs&j=70ac378a-cb1f-50d1-b328-169807afbcfa
* Nightly build on Certbot's Azure setup: https://dev.azure.com/certbot/certbot/_build/results?buildId=2426&view=logs&j=70ac378a-cb1f-50d1-b328-169807afbcfa
The builds on my fork pushed to https://hub.docker.com/u/certbottest. The credentials for this account are in our shared vault in 1password if you want to play around with this.
While the scripts will (almost?) always be run in CI, I tested the scripts successfully on macOS, Ubuntu 18.04, and Ubuntu 20.04, however, **the scripts do not seem to work when using the Docker snap, at least on Ubuntu 20.04.** It does work with the `docker.io` packages from `apt`. I was able to make things work by no longer setting `DOCKER_BUILDKIT`, but as I described in the code comments, this breaks things on Azure.
When writing this PR, I tried to make the minimal modifications to our current set up to get the behavior we want. I'm planning on working on splitting the Docker builds into different Azure jobs so it doesn't increase the overall build time, but this isn't trivial so I figured it would be best done in a separate PR.
* Remove license.
* update build scripts
* write deploy code
* Remove unused READMEs.
* rewrite readme
* Make testing on a fork easier.
* Set up Azure automation.
* fix typo
* Make output more verbose.
* clean up cleanup...everybody everywhere
* separate build and deploy
* Document docker-hub credentials
* Use Docker BuildKit when building.
* Remove unneeded .gitignore files.
* Fix tools/docker/README.md grammar
Co-authored-by: ohemorange <ebportnoy@gmail.com>
* Clarify <TAG> in README.
* no docker snap
* rename docker job
Co-authored-by: Erica Portnoy <ebportnoy@gmail.com>
People who are considering running Certbot with Docker are probably doing so because their webserver is to be run with Docker. These changes to the README should help them to understand that doing so will require knowledge of Docker volumes and that the architectural justification for running Certbot in a separate container is the "one service per container" best practice.
So, setuptools broke the installation setup, by removing a deprecated API that is still used by some of our dependencies (see pypa/setuptools#2017)
This PR fixes the Docker build by using pipstrap to pin pip/setuptools/wheels, like it is done in several critical places (certbot-auto, ...).
An issue in certbot is opened to fix more generally the problem in most recent versions of setuptools: certbot/certbot#7976
It rebuilt locally all dockers (certbot + dns plugins) for the three architectures, and all have passed.
This PR adds appropriate corrections to certbot dockerfile to work with the new layout (moving certbot python project in its own subdirectory).
This PR has been tested with success using the `build.sh` script on a fake v1.0 version of certbot published on my fork (https://github.com/adferrand/certbot/releases/tag/v1.0) instead of archives from `certbot/certbot`.
* Add one Dockerfile for each supported architecture
* Update multi arch hooks
* Create multi arch scripts
* Update README.md
* WIP. Use build args instead of multiple Dockerfiles in build script
* WIP. Fix typo mistake
* Use build args instead of multiple Dockerfiles in build script
* WIP. Build all the architectures in one DockerHub build
* Add arm64v8 architecture
* WIP. Testing build all the architectures in one DockerHub build
* Revert "WIP. Testing build all the architectures in one DockerHub build"
This reverts commit 94a89398a4120b183d2851ac7cb9c93db0e3d187.
* Refactor tag docker images in hooks/post_push files
* Use variables instead of positional arguments
* Export externally used variables
* Use ${variable//search/replace} instead of echo $variable | sed.
* Update README.md
* Add Cleanup in build.sh script
* Fix tagging error in post_push hook
* Add "-ex" flags to bash script
* Test tagging images in build hook
* Tagging in hook/post_build instead of hook/post_push
* Push built architecture dependent image
* Use Dockerfile argument instead of fixed value
* Fix typo
* Use parameter instead of global variable
* Use custom "hook/push" to prevent duplicated push
* Make a short doctype for each function declared in common
