remove all cloudxns-related code (#9361)

certbot-dns-cloudxns/LICENSE.txt

@@ -1,190 +0,0 @@
-   Copyright 2015 Electronic Frontier Foundation and others
-
-   Licensed under the Apache License, Version 2.0 (the "License");
-   you may not use this file except in compliance with the License.
-   You may obtain a copy of the License at
-
-       http://www.apache.org/licenses/LICENSE-2.0
-
-   Unless required by applicable law or agreed to in writing, software
-   distributed under the License is distributed on an "AS IS" BASIS,
-   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-   See the License for the specific language governing permissions and
-   limitations under the License.
-
-                                 Apache License
-                           Version 2.0, January 2004
-                        http://www.apache.org/licenses/
-
-   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
-
-   1. Definitions.
-
-      "License" shall mean the terms and conditions for use, reproduction,
-      and distribution as defined by Sections 1 through 9 of this document.
-
-      "Licensor" shall mean the copyright owner or entity authorized by
-      the copyright owner that is granting the License.
-
-      "Legal Entity" shall mean the union of the acting entity and all
-      other entities that control, are controlled by, or are under common
-      control with that entity. For the purposes of this definition,
-      "control" means (i) the power, direct or indirect, to cause the
-      direction or management of such entity, whether by contract or
-      otherwise, or (ii) ownership of fifty percent (50%) or more of the
-      outstanding shares, or (iii) beneficial ownership of such entity.
-
-      "You" (or "Your") shall mean an individual or Legal Entity
-      exercising permissions granted by this License.
-
-      "Source" form shall mean the preferred form for making modifications,
-      including but not limited to software source code, documentation
-      source, and configuration files.
-
-      "Object" form shall mean any form resulting from mechanical
-      transformation or translation of a Source form, including but
-      not limited to compiled object code, generated documentation,
-      and conversions to other media types.
-
-      "Work" shall mean the work of authorship, whether in Source or
-      Object form, made available under the License, as indicated by a
-      copyright notice that is included in or attached to the work
-      (an example is provided in the Appendix below).
-
-      "Derivative Works" shall mean any work, whether in Source or Object
-      form, that is based on (or derived from) the Work and for which the
-      editorial revisions, annotations, elaborations, or other modifications
-      represent, as a whole, an original work of authorship. For the purposes
-      of this License, Derivative Works shall not include works that remain
-      separable from, or merely link (or bind by name) to the interfaces of,
-      the Work and Derivative Works thereof.
-
-      "Contribution" shall mean any work of authorship, including
-      the original version of the Work and any modifications or additions
-      to that Work or Derivative Works thereof, that is intentionally
-      submitted to Licensor for inclusion in the Work by the copyright owner
-      or by an individual or Legal Entity authorized to submit on behalf of
-      the copyright owner. For the purposes of this definition, "submitted"
-      means any form of electronic, verbal, or written communication sent
-      to the Licensor or its representatives, including but not limited to
-      communication on electronic mailing lists, source code control systems,
-      and issue tracking systems that are managed by, or on behalf of, the
-      Licensor for the purpose of discussing and improving the Work, but
-      excluding communication that is conspicuously marked or otherwise
-      designated in writing by the copyright owner as "Not a Contribution."
-
-      "Contributor" shall mean Licensor and any individual or Legal Entity
-      on behalf of whom a Contribution has been received by Licensor and
-      subsequently incorporated within the Work.
-
-   2. Grant of Copyright License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      copyright license to reproduce, prepare Derivative Works of,
-      publicly display, publicly perform, sublicense, and distribute the
-      Work and such Derivative Works in Source or Object form.
-
-   3. Grant of Patent License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      (except as stated in this section) patent license to make, have made,
-      use, offer to sell, sell, import, and otherwise transfer the Work,
-      where such license applies only to those patent claims licensable
-      by such Contributor that are necessarily infringed by their
-      Contribution(s) alone or by combination of their Contribution(s)
-      with the Work to which such Contribution(s) was submitted. If You
-      institute patent litigation against any entity (including a
-      cross-claim or counterclaim in a lawsuit) alleging that the Work
-      or a Contribution incorporated within the Work constitutes direct
-      or contributory patent infringement, then any patent licenses
-      granted to You under this License for that Work shall terminate
-      as of the date such litigation is filed.
-
-   4. Redistribution. You may reproduce and distribute copies of the
-      Work or Derivative Works thereof in any medium, with or without
-      modifications, and in Source or Object form, provided that You
-      meet the following conditions:
-
-      (a) You must give any other recipients of the Work or
-          Derivative Works a copy of this License; and
-
-      (b) You must cause any modified files to carry prominent notices
-          stating that You changed the files; and
-
-      (c) You must retain, in the Source form of any Derivative Works
-          that You distribute, all copyright, patent, trademark, and
-          attribution notices from the Source form of the Work,
-          excluding those notices that do not pertain to any part of
-          the Derivative Works; and
-
-      (d) If the Work includes a "NOTICE" text file as part of its
-          distribution, then any Derivative Works that You distribute must
-          include a readable copy of the attribution notices contained
-          within such NOTICE file, excluding those notices that do not
-          pertain to any part of the Derivative Works, in at least one
-          of the following places: within a NOTICE text file distributed
-          as part of the Derivative Works; within the Source form or
-          documentation, if provided along with the Derivative Works; or,
-          within a display generated by the Derivative Works, if and
-          wherever such third-party notices normally appear. The contents
-          of the NOTICE file are for informational purposes only and
-          do not modify the License. You may add Your own attribution
-          notices within Derivative Works that You distribute, alongside
-          or as an addendum to the NOTICE text from the Work, provided
-          that such additional attribution notices cannot be construed
-          as modifying the License.
-
-      You may add Your own copyright statement to Your modifications and
-      may provide additional or different license terms and conditions
-      for use, reproduction, or distribution of Your modifications, or
-      for any such Derivative Works as a whole, provided Your use,
-      reproduction, and distribution of the Work otherwise complies with
-      the conditions stated in this License.
-
-   5. Submission of Contributions. Unless You explicitly state otherwise,
-      any Contribution intentionally submitted for inclusion in the Work
-      by You to the Licensor shall be under the terms and conditions of
-      this License, without any additional terms or conditions.
-      Notwithstanding the above, nothing herein shall supersede or modify
-      the terms of any separate license agreement you may have executed
-      with Licensor regarding such Contributions.
-
-   6. Trademarks. This License does not grant permission to use the trade
-      names, trademarks, service marks, or product names of the Licensor,
-      except as required for reasonable and customary use in describing the
-      origin of the Work and reproducing the content of the NOTICE file.
-
-   7. Disclaimer of Warranty. Unless required by applicable law or
-      agreed to in writing, Licensor provides the Work (and each
-      Contributor provides its Contributions) on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-      implied, including, without limitation, any warranties or conditions
-      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
-      PARTICULAR PURPOSE. You are solely responsible for determining the
-      appropriateness of using or redistributing the Work and assume any
-      risks associated with Your exercise of permissions under this License.
-
-   8. Limitation of Liability. In no event and under no legal theory,
-      whether in tort (including negligence), contract, or otherwise,
-      unless required by applicable law (such as deliberate and grossly
-      negligent acts) or agreed to in writing, shall any Contributor be
-      liable to You for damages, including any direct, indirect, special,
-      incidental, or consequential damages of any character arising as a
-      result of this License or out of the use or inability to use the
-      Work (including but not limited to damages for loss of goodwill,
-      work stoppage, computer failure or malfunction, or any and all
-      other commercial damages or losses), even if such Contributor
-      has been advised of the possibility of such damages.
-
-   9. Accepting Warranty or Additional Liability. While redistributing
-      the Work or Derivative Works thereof, You may choose to offer,
-      and charge a fee for, acceptance of support, warranty, indemnity,
-      or other liability obligations and/or rights consistent with this
-      License. However, in accepting such obligations, You may act only
-      on Your own behalf and on Your sole responsibility, not on behalf
-      of any other Contributor, and only if You agree to indemnify,
-      defend, and hold each Contributor harmless for any liability
-      incurred by, or claims asserted against, such Contributor by reason
-      of your accepting any such warranty or additional liability.
-
-   END OF TERMS AND CONDITIONS

certbot-dns-cloudxns/MANIFEST.in

@@ -1,7 +0,0 @@
-include LICENSE.txt
-include README.rst
-recursive-include docs *
-recursive-include tests *
-include certbot_dns_cloudxns/py.typed
-global-exclude __pycache__
-global-exclude *.py[cod]

certbot-dns-cloudxns/README.rst

@@ -1 +0,0 @@
-CloudXNS DNS Authenticator plugin for Certbot

certbot-dns-cloudxns/certbot_dns_cloudxns/__init__.py

@@ -1,90 +0,0 @@
-"""
-The `~certbot_dns_cloudxns.dns_cloudxns` plugin automates the process of
-completing a ``dns-01`` challenge (`~acme.challenges.DNS01`) by creating, and
-subsequently removing, TXT records using the CloudXNS API.
-
-.. note::
-   The plugin is not installed by default. It can be installed by heading to
-   `certbot.eff.org <https://certbot.eff.org/instructions#wildcard>`_, choosing your system and
-   selecting the Wildcard tab.
-
-Named Arguments
----------------
-
-========================================  =====================================
-``--dns-cloudxns-credentials``            CloudXNS credentials_ INI file.
-                                          (Required)
-``--dns-cloudxns-propagation-seconds``    The number of seconds to wait for DNS
-                                          to propagate before asking the ACME
-                                          server to verify the DNS record.
-                                          (Default: 30)
-========================================  =====================================
-
-
-Credentials
------------
-
-Use of this plugin requires a configuration file containing CloudXNS API
-credentials, obtained from your CloudXNS
-`API page <https://www.cloudxns.net/en/AccountManage/apimanage.html>`_.
-
-.. code-block:: ini
-   :name: credentials.ini
-   :caption: Example credentials file:
-
-   # CloudXNS API credentials used by Certbot
-   dns_cloudxns_api_key = 1234567890abcdef1234567890abcdef
-   dns_cloudxns_secret_key = 1122334455667788
-
-The path to this file can be provided interactively or using the
-``--dns-cloudxns-credentials`` command-line argument. Certbot records the path
-to this file for use during renewal, but does not store the file's contents.
-
-.. caution::
-   You should protect these API credentials as you would the password to your
-   CloudXNS account. Users who can read this file can use these credentials to
-   issue arbitrary API calls on your behalf. Users who can cause Certbot to run
-   using these credentials can complete a ``dns-01`` challenge to acquire new
-   certificates or revoke existing certificates for associated domains, even if
-   those domains aren't being managed by this server.
-
-Certbot will emit a warning if it detects that the credentials file can be
-accessed by other users on your system. The warning reads "Unsafe permissions
-on credentials configuration file", followed by the path to the credentials
-file. This warning will be emitted each time Certbot uses the credentials file,
-including for renewal, and cannot be silenced except by addressing the issue
-(e.g., by using a command like ``chmod 600`` to restrict access to the file).
-
-
-Examples
---------
-
-.. code-block:: bash
-   :caption: To acquire a certificate for ``example.com``
-
-   certbot certonly \\
-     --dns-cloudxns \\
-     --dns-cloudxns-credentials ~/.secrets/certbot/cloudxns.ini \\
-     -d example.com
-
-.. code-block:: bash
-   :caption: To acquire a single certificate for both ``example.com`` and
-             ``www.example.com``
-
-   certbot certonly \\
-     --dns-cloudxns \\
-     --dns-cloudxns-credentials ~/.secrets/certbot/cloudxns.ini \\
-     -d example.com \\
-     -d www.example.com
-
-.. code-block:: bash
-   :caption: To acquire a certificate for ``example.com``, waiting 60 seconds
-             for DNS propagation
-
-   certbot certonly \\
-     --dns-cloudxns \\
-     --dns-cloudxns-credentials ~/.secrets/certbot/cloudxns.ini \\
-     --dns-cloudxns-propagation-seconds 60 \\
-     -d example.com
-
-"""

certbot-dns-cloudxns/certbot_dns_cloudxns/_internal/__init__.py

@@ -1 +0,0 @@
-"""Internal implementation of `~certbot_dns_cloudxns.dns_cloudxns` plugin."""

certbot-dns-cloudxns/certbot_dns_cloudxns/_internal/dns_cloudxns.py

@@ -1,93 +0,0 @@
-"""DNS Authenticator for CloudXNS DNS."""
-import logging
-from typing import Any
-from typing import Callable
-from typing import Optional
-
-from lexicon.providers import cloudxns
-from requests import HTTPError
-
-from certbot import errors
-from certbot.plugins import dns_common
-from certbot.plugins import dns_common_lexicon
-from certbot.plugins.dns_common import CredentialsConfiguration
-
-logger = logging.getLogger(__name__)
-
-ACCOUNT_URL = 'https://www.cloudxns.net/en/AccountManage/apimanage.html'
-
-
-class Authenticator(dns_common.DNSAuthenticator):
-    """DNS Authenticator for CloudXNS DNS
-
-    This Authenticator uses the CloudXNS DNS API to fulfill a dns-01 challenge.
-    """
-
-    description = 'Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS).'
-    ttl = 60
-
-    def __init__(self, *args: Any, **kwargs: Any) -> None:
-        super().__init__(*args, **kwargs)
-        self.credentials: Optional[CredentialsConfiguration] = None
-
-    @classmethod
-    def add_parser_arguments(cls, add: Callable[..., None],
-                             default_propagation_seconds: int = 30) -> None:
-        super().add_parser_arguments(add, default_propagation_seconds)
-        add('credentials', help='CloudXNS credentials INI file.')
-
-    def more_info(self) -> str:
-        return 'This plugin configures a DNS TXT record to respond to a dns-01 challenge using ' + \
-               'the CloudXNS API.'
-
-    def _setup_credentials(self) -> None:
-        self.credentials = self._configure_credentials(
-            'credentials',
-            'CloudXNS credentials INI file',
-            {
-                'api-key': 'API key for CloudXNS account, obtained from {0}'.format(ACCOUNT_URL),
-                'secret-key': 'Secret key for CloudXNS account, obtained from {0}'
-                              .format(ACCOUNT_URL)
-            }
-        )
-
-    def _perform(self, domain: str, validation_name: str, validation: str) -> None:
-        self._get_cloudxns_client().add_txt_record(domain, validation_name, validation)
-
-    def _cleanup(self, domain: str, validation_name: str, validation: str) -> None:
-        self._get_cloudxns_client().del_txt_record(domain, validation_name, validation)
-
-    def _get_cloudxns_client(self) -> "_CloudXNSLexiconClient":
-        if not self.credentials:  # pragma: no cover
-            raise errors.Error("Plugin has not been prepared.")
-        return _CloudXNSLexiconClient(self.credentials.conf('api-key'),
-                                      self.credentials.conf('secret-key'),
-                                      self.ttl)
-
-
-class _CloudXNSLexiconClient(dns_common_lexicon.LexiconClient):
-    """
-    Encapsulates all communication with the CloudXNS via Lexicon.
-    """
-
-    def __init__(self, api_key: str, secret_key: str, ttl: int) -> None:
-        super().__init__()
-
-        config = dns_common_lexicon.build_lexicon_config('cloudxns', {
-            'ttl': ttl,
-        }, {
-            'auth_username': api_key,
-            'auth_token': secret_key,
-        })
-
-        self.provider = cloudxns.Provider(config)
-
-    def _handle_http_error(self, e: HTTPError, domain_name: str) -> Optional[errors.PluginError]:
-        hint = None
-        if str(e).startswith('400 Client Error:'):
-            hint = 'Are your API key and Secret key values correct?'
-
-        hint_disp = f' ({hint})' if hint else ''
-
-        return errors.PluginError(f'Error determining zone identifier for {domain_name}: '
-                                  f'{e}.{hint_disp}')

certbot-dns-cloudxns/docs/.gitignore

@@ -1 +0,0 @@
-/_build/

certbot-dns-cloudxns/docs/Makefile

@@ -1,20 +0,0 @@
-# Minimal makefile for Sphinx documentation
-#
-
-# You can set these variables from the command line.
-SPHINXOPTS    =
-SPHINXBUILD   = sphinx-build
-SPHINXPROJ    = certbot-dns-cloudxns
-SOURCEDIR     = .
-BUILDDIR      = _build
-
-# Put it first so that "make" without argument is like "make help".
-help:
-	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
-
-.PHONY: help Makefile
-
-# Catch-all target: route all unknown targets to Sphinx using the new
-# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
-%: Makefile
-	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)

certbot-dns-cloudxns/docs/api.rst

@@ -1,5 +0,0 @@
-=================
-API Documentation
-=================
-
-Certbot plugins implement the Certbot plugins API, and do not otherwise have an external API.

certbot-dns-cloudxns/docs/conf.py

@@ -1,181 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-# certbot-dns-cloudxns documentation build configuration file, created by
-# sphinx-quickstart on Wed May 10 16:05:50 2017.
-#
-# This file is execfile()d with the current directory set to its
-# containing dir.
-#
-# Note that not all possible configuration values are present in this
-# autogenerated file.
-#
-# All configuration values have a default; values that are commented out
-# serve to show the default.
-
-# If extensions (or modules to document with autodoc) are in another directory,
-# add these directories to sys.path here. If the directory is relative to the
-# documentation root, use os.path.abspath to make it absolute, like shown here.
-#
-import os
-
-# import sys
-# sys.path.insert(0, os.path.abspath('.'))
-
-
-# -- General configuration ------------------------------------------------
-
-# If your documentation needs a minimal Sphinx version, state it here.
-#
-needs_sphinx = '1.0'
-
-# Add any Sphinx extension module names here, as strings. They can be
-# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
-# ones.
-extensions = ['sphinx.ext.autodoc',
-    'sphinx.ext.intersphinx',
-    'sphinx.ext.todo',
-    'sphinx.ext.coverage',
-    'sphinx.ext.viewcode']
-
-autodoc_member_order = 'bysource'
-autodoc_default_flags = ['show-inheritance']
-
-# Add any paths that contain templates here, relative to this directory.
-templates_path = ['_templates']
-
-# The suffix(es) of source filenames.
-# You can specify multiple suffix as a list of string:
-#
-# source_suffix = ['.rst', '.md']
-source_suffix = '.rst'
-
-# The master toctree document.
-master_doc = 'index'
-
-# General information about the project.
-project = u'certbot-dns-cloudxns'
-copyright = u'2017, Certbot Project'
-author = u'Certbot Project'
-
-# The version info for the project you're documenting, acts as replacement for
-# |version| and |release|, also used in various other places throughout the
-# built documents.
-#
-# The short X.Y version.
-version = u'0'
-# The full version, including alpha/beta/rc tags.
-release = u'0'
-
-# The language for content autogenerated by Sphinx. Refer to documentation
-# for a list of supported languages.
-#
-# This is also used if you do content translation via gettext catalogs.
-# Usually you set "language" from the command line for these cases.
-language = 'en'
-
-# List of patterns, relative to source directory, that match files and
-# directories to ignore when looking for source files.
-# This patterns also effect to html_static_path and html_extra_path
-exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store']
-
-default_role = 'py:obj'
-
-# The name of the Pygments (syntax highlighting) style to use.
-pygments_style = 'sphinx'
-
-# If true, `todo` and `todoList` produce output, else they produce nothing.
-todo_include_todos = False
-
-
-# -- Options for HTML output ----------------------------------------------
-
-# The theme to use for HTML and HTML Help pages.  See the documentation for
-# a list of builtin themes.
-#
-
-# https://docs.readthedocs.io/en/stable/faq.html#i-want-to-use-the-read-the-docs-theme-locally
-# on_rtd is whether we are on readthedocs.org
-on_rtd = os.environ.get('READTHEDOCS', None) == 'True'
-if not on_rtd:  # only import and set the theme if we're building docs locally
-    import sphinx_rtd_theme
-    html_theme = 'sphinx_rtd_theme'
-    html_theme_path = [sphinx_rtd_theme.get_html_theme_path()]
-# otherwise, readthedocs.org uses their theme by default, so no need to specify it
-
-# Theme options are theme-specific and customize the look and feel of a theme
-# further.  For a list of options available for each theme, see the
-# documentation.
-#
-# html_theme_options = {}
-
-# Add any paths that contain custom static files (such as style sheets) here,
-# relative to this directory. They are copied after the builtin static files,
-# so a file named "default.css" will overwrite the builtin "default.css".
-#html_static_path = ['_static']
-
-
-# -- Options for HTMLHelp output ------------------------------------------
-
-# Output file base name for HTML help builder.
-htmlhelp_basename = 'certbot-dns-cloudxnsdoc'
-
-
-# -- Options for LaTeX output ---------------------------------------------
-
-latex_elements = {
-    # The paper size ('letterpaper' or 'a4paper').
-    #
-    # 'papersize': 'letterpaper',
-
-    # The font size ('10pt', '11pt' or '12pt').
-    #
-    # 'pointsize': '10pt',
-
-    # Additional stuff for the LaTeX preamble.
-    #
-    # 'preamble': '',
-
-    # Latex figure (float) alignment
-    #
-    # 'figure_align': 'htbp',
-}
-
-# Grouping the document tree into LaTeX files. List of tuples
-# (source start file, target name, title,
-#  author, documentclass [howto, manual, or own class]).
-latex_documents = [
-    (master_doc, 'certbot-dns-cloudxns.tex', u'certbot-dns-cloudxns Documentation',
-     u'Certbot Project', 'manual'),
-]
-
-
-# -- Options for manual page output ---------------------------------------
-
-# One entry per manual page. List of tuples
-# (source start file, name, description, authors, manual section).
-man_pages = [
-    (master_doc, 'certbot-dns-cloudxns', u'certbot-dns-cloudxns Documentation',
-     [author], 1)
-]
-
-
-# -- Options for Texinfo output -------------------------------------------
-
-# Grouping the document tree into Texinfo files. List of tuples
-# (source start file, target name, title, author,
-#  dir menu entry, description, category)
-texinfo_documents = [
-    (master_doc, 'certbot-dns-cloudxns', u'certbot-dns-cloudxns Documentation',
-     author, 'certbot-dns-cloudxns', 'One line description of project.',
-     'Miscellaneous'),
-]
-
-
-
-
-# Example configuration for intersphinx: refer to the Python standard library.
-intersphinx_mapping = {
-    'python': ('https://docs.python.org/', None),
-    'acme': ('https://acme-python.readthedocs.org/en/latest/', None),
-    'certbot': ('https://eff-certbot.readthedocs.io/en/stable/', None),
-}

certbot-dns-cloudxns/docs/index.rst

@@ -1,28 +0,0 @@
-.. certbot-dns-cloudxns documentation master file, created by
-   sphinx-quickstart on Wed May 10 16:05:50 2017.
-   You can adapt this file completely to your liking, but it should at least
-   contain the root `toctree` directive.
-
-Welcome to certbot-dns-cloudxns's documentation!
-================================================
-
-.. toctree::
-   :maxdepth: 2
-   :caption: Contents:
-
-.. automodule:: certbot_dns_cloudxns
-   :members:
-
-.. toctree::
-   :maxdepth: 1
-
-   api
-
-
-
-Indices and tables
-==================
-
-* :ref:`genindex`
-* :ref:`modindex`
-* :ref:`search`

certbot-dns-cloudxns/docs/make.bat

@@ -1,36 +0,0 @@
-@ECHO OFF
-
-pushd %~dp0
-
-REM Command file for Sphinx documentation
-
-if "%SPHINXBUILD%" == "" (
-	set SPHINXBUILD=sphinx-build
-)
-set SOURCEDIR=.
-set BUILDDIR=_build
-set SPHINXPROJ=certbot-dns-cloudxns
-
-if "%1" == "" goto help
-
-%SPHINXBUILD% >NUL 2>NUL
-if errorlevel 9009 (
-	echo.
-	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
-	echo.installed, then set the SPHINXBUILD environment variable to point
-	echo.to the full path of the 'sphinx-build' executable. Alternatively you
-	echo.may add the Sphinx directory to PATH.
-	echo.
-	echo.If you don't have Sphinx installed, grab it from
-	echo.https://www.sphinx-doc.org/
-	exit /b 1
-)
-
-%SPHINXBUILD% -M %1 %SOURCEDIR% %BUILDDIR% %SPHINXOPTS%
-goto end
-
-:help
-%SPHINXBUILD% -M help %SOURCEDIR% %BUILDDIR% %SPHINXOPTS%
-
-:end
-popd

certbot-dns-cloudxns/readthedocs.org.requirements.txt

@@ -1,15 +0,0 @@
-# readthedocs.org gives no way to change the install command to "pip
-# install -e certbot-dns-cloudxns[docs]" (that would in turn install documentation
-# dependencies), but it allows to specify a requirements.txt file at
-# https://readthedocs.org/dashboard/letsencrypt/advanced/ (c.f. #259)
-
-# Although ReadTheDocs certainly doesn't need to install the project
-# in --editable mode (-e), just "pip install certbot-dns-cloudxns[docs]" does not work as
-# expected and "pip install -e certbot-dns-cloudxns[docs]" must be used instead
-
-# We also pin our dependencies for increased stability.
-
--c ../tools/requirements.txt
--e acme
--e certbot
--e certbot-dns-cloudxns[docs]

certbot-dns-cloudxns/setup.py

@@ -1,73 +0,0 @@
-import os
-import sys
-
-from setuptools import find_packages
-from setuptools import setup
-
-version = '1.30.0.dev0'
-
-install_requires = [
-    'dns-lexicon>=3.2.1',
-    'setuptools>=41.6.0',
-]
-
-if not os.environ.get('SNAP_BUILD'):
-    install_requires.extend([
-        # We specify the minimum acme and certbot version as the current plugin
-        # version for simplicity. See
-        # https://github.com/certbot/certbot/issues/8761 for more info.
-        f'acme>={version}',
-        f'certbot>={version}',
-    ])
-elif 'bdist_wheel' in sys.argv[1:]:
-    raise RuntimeError('Unset SNAP_BUILD when building wheels '
-                       'to include certbot dependencies.')
-if os.environ.get('SNAP_BUILD'):
-    install_requires.append('packaging')
-
-docs_extras = [
-    'Sphinx>=1.0',  # autodoc_member_order = 'bysource', autodoc_default_flags
-    'sphinx_rtd_theme',
-]
-
-setup(
-    name='certbot-dns-cloudxns',
-    version=version,
-    description="CloudXNS DNS Authenticator plugin for Certbot",
-    url='https://github.com/certbot/certbot',
-    author="Certbot Project",
-    author_email='certbot-dev@eff.org',
-    license='Apache License 2.0',
-    python_requires='>=3.7',
-    classifiers=[
-        'Development Status :: 5 - Production/Stable',
-        'Environment :: Plugins',
-        'Intended Audience :: System Administrators',
-        'License :: OSI Approved :: Apache Software License',
-        'Operating System :: POSIX :: Linux',
-        'Programming Language :: Python',
-        'Programming Language :: Python :: 3',
-        'Programming Language :: Python :: 3.7',
-        'Programming Language :: Python :: 3.8',
-        'Programming Language :: Python :: 3.9',
-        'Programming Language :: Python :: 3.10',
-        'Topic :: Internet :: WWW/HTTP',
-        'Topic :: Security',
-        'Topic :: System :: Installation/Setup',
-        'Topic :: System :: Networking',
-        'Topic :: System :: Systems Administration',
-        'Topic :: Utilities',
-    ],
-
-    packages=find_packages(),
-    include_package_data=True,
-    install_requires=install_requires,
-    extras_require={
-        'docs': docs_extras,
-    },
-    entry_points={
-        'certbot.plugins': [
-            'dns-cloudxns = certbot_dns_cloudxns._internal.dns_cloudxns:Authenticator',
-        ],
-    },
-)

certbot-dns-cloudxns/tests/dns_cloudxns_test.py

@@ -1,58 +0,0 @@
-"""Tests for certbot_dns_cloudxns._internal.dns_cloudxns."""
-
-import unittest
-
-try:
-    import mock
-except ImportError: # pragma: no cover
-    from unittest import mock # type: ignore
-from requests.exceptions import HTTPError
-from requests.exceptions import RequestException
-
-from certbot.compat import os
-from certbot.plugins import dns_test_common
-from certbot.plugins import dns_test_common_lexicon
-from certbot.tests import util as test_util
-
-DOMAIN_NOT_FOUND = Exception('No domain found')
-GENERIC_ERROR = RequestException
-LOGIN_ERROR = HTTPError('400 Client Error: ...')
-
-API_KEY = 'foo'
-SECRET = 'bar'
-
-
-class AuthenticatorTest(test_util.TempDirTestCase,
-                        dns_test_common_lexicon.BaseLexiconAuthenticatorTest):
-
-    def setUp(self):
-        super().setUp()
-
-        from certbot_dns_cloudxns._internal.dns_cloudxns import Authenticator
-
-        path = os.path.join(self.tempdir, 'file.ini')
-        dns_test_common.write({"cloudxns_api_key": API_KEY, "cloudxns_secret_key": SECRET}, path)
-
-        self.config = mock.MagicMock(cloudxns_credentials=path,
-                                     cloudxns_propagation_seconds=0)  # don't wait during tests
-
-        self.auth = Authenticator(self.config, "cloudxns")
-
-        self.mock_client = mock.MagicMock()
-        # _get_cloudxns_client | pylint: disable=protected-access
-        self.auth._get_cloudxns_client = mock.MagicMock(return_value=self.mock_client)
-
-
-class CloudXNSLexiconClientTest(unittest.TestCase, dns_test_common_lexicon.BaseLexiconClientTest):
-
-    def setUp(self):
-        from certbot_dns_cloudxns._internal.dns_cloudxns import _CloudXNSLexiconClient
-
-        self.client = _CloudXNSLexiconClient(API_KEY, SECRET, 0)
-
-        self.provider_mock = mock.MagicMock()
-        self.client.provider = self.provider_mock
-
-
-if __name__ == "__main__":
-    unittest.main()  # pragma: no cover

certbot/certbot/_internal/cli/plugins_parsing.py

@@ -45,10 +45,6 @@ def _plugins_parsing(helpful: "helpful.HelpfulArgumentParser",
                 default=flag_default("dns_cloudflare"),
                 help=("Obtain certificates using a DNS TXT record (if you are "
                       "using Cloudflare for DNS)."))
-    helpful.add(["plugins", "certonly"], "--dns-cloudxns", action="store_true",
-                default=flag_default("dns_cloudxns"),
-                help=("Obtain certificates using a DNS TXT record (if you are "
-                     "using CloudXNS for DNS)."))
     helpful.add(["plugins", "certonly"], "--dns-digitalocean", action="store_true",
                 default=flag_default("dns_digitalocean"),
                 help=("Obtain certificates using a DNS TXT record (if you are "

certbot/certbot/_internal/constants.py

@@ -112,7 +112,6 @@ CLI_DEFAULTS: Dict[str, Any] = dict(  # noqa
     manual=False,
     webroot=False,
     dns_cloudflare=False,
-    dns_cloudxns=False,
     dns_digitalocean=False,
     dns_dnsimple=False,
     dns_dnsmadeeasy=False,

certbot/certbot/_internal/plugins/disco.py

@@ -31,7 +31,6 @@ PREFIX_FREE_DISTRIBUTIONS = [
     "certbot",
     "certbot-apache",
     "certbot-dns-cloudflare",
-    "certbot-dns-cloudxns",
     "certbot-dns-digitalocean",
     "certbot-dns-dnsimple",
     "certbot-dns-dnsmadeeasy",

certbot/certbot/_internal/plugins/selection.py

@@ -168,7 +168,7 @@ def choose_plugin(prepared: List[disco.PluginEntryPoint],
             return None
 
 
-noninstaller_plugins = ["webroot", "manual", "standalone", "dns-cloudflare", "dns-cloudxns",
+noninstaller_plugins = ["webroot", "manual", "standalone", "dns-cloudflare",
                         "dns-digitalocean", "dns-dnsimple", "dns-dnsmadeeasy", "dns-gehirn",
                         "dns-google", "dns-linode", "dns-luadns", "dns-nsone", "dns-ovh",
                         "dns-rfc2136", "dns-route53", "dns-sakuracloud"]
@@ -316,8 +316,6 @@ def cli_plugin_requests(config: configuration.NamespaceConfig
         req_auth = set_configurator(req_auth, "manual")
     if config.dns_cloudflare:
         req_auth = set_configurator(req_auth, "dns-cloudflare")
-    if config.dns_cloudxns:
-        req_auth = set_configurator(req_auth, "dns-cloudxns")
     if config.dns_digitalocean:
         req_auth = set_configurator(req_auth, "dns-digitalocean")
     if config.dns_dnsimple:

certbot/docs/packaging.rst

@@ -12,7 +12,6 @@ We release packages and upload them to PyPI (wheels and source tarballs).
 - https://pypi.python.org/pypi/certbot-apache
 - https://pypi.python.org/pypi/certbot-nginx
 - https://pypi.python.org/pypi/certbot-dns-cloudflare
-- https://pypi.python.org/pypi/certbot-dns-cloudxns
 - https://pypi.python.org/pypi/certbot-dns-digitalocean
 - https://pypi.python.org/pypi/certbot-dns-dnsimple
 - https://pypi.python.org/pypi/certbot-dns-dnsmadeeasy

certbot/docs/using.rst

@@ -206,7 +206,6 @@ use the DNS plugins on your system.
 Once installed, you can find documentation on how to use each plugin at:
 
 * `certbot-dns-cloudflare <https://certbot-dns-cloudflare.readthedocs.io>`_
-* `certbot-dns-cloudxns <https://certbot-dns-cloudxns.readthedocs.io>`_
 * `certbot-dns-digitalocean <https://certbot-dns-digitalocean.readthedocs.io>`_
 * `certbot-dns-dnsimple <https://certbot-dns-dnsimple.readthedocs.io>`_
 * `certbot-dns-dnsmadeeasy <https://certbot-dns-dnsmadeeasy.readthedocs.io>`_

tools/_release.sh

@@ -57,7 +57,7 @@ export GPG_TTY=$(tty)
 PORT=${PORT:-1234}
 
 # subpackages to be released (the way the script thinks about them)
-SUBPKGS_NO_CERTBOT="acme certbot-apache certbot-nginx certbot-dns-cloudflare certbot-dns-cloudxns \
+SUBPKGS_NO_CERTBOT="acme certbot-apache certbot-nginx certbot-dns-cloudflare \
                     certbot-dns-digitalocean certbot-dns-dnsimple certbot-dns-dnsmadeeasy \
                     certbot-dns-gehirn certbot-dns-google certbot-dns-linode certbot-dns-luadns \
                     certbot-dns-nsone certbot-dns-ovh certbot-dns-rfc2136 certbot-dns-route53 \

tools/docker/lib/common

@@ -20,7 +20,6 @@ export CERTBOT_PLUGINS=(
     "dns-dnsimple"
     "dns-ovh"
     "dns-cloudflare"
-    "dns-cloudxns"
     "dns-digitalocean"
     "dns-google"
     "dns-luadns"

tools/pinning/current/pyproject.toml

@@ -15,7 +15,6 @@ python = "^3.7"
 certbot-ci = {path = "../../../certbot-ci"}
 certbot-compatibility-test = {path = "../../../certbot-compatibility-test"}
 certbot-dns-cloudflare = {path = "../../../certbot-dns-cloudflare", extras = ["docs"]}
-certbot-dns-cloudxns = {path = "../../../certbot-dns-cloudxns", extras = ["docs"]}
 certbot-dns-digitalocean = {path = "../../../certbot-dns-digitalocean", extras = ["docs"]}
 certbot-dns-dnsimple = {path = "../../../certbot-dns-dnsimple", extras = ["docs"]}
 certbot-dns-dnsmadeeasy = {path = "../../../certbot-dns-dnsmadeeasy", extras = ["docs"]}

tools/pinning/oldest/pyproject.toml

@@ -18,7 +18,6 @@ python = "3.7"
 # on acme so certbot must be listed before acme.
 certbot-ci = {path = "../../../certbot-ci"}
 certbot-dns-cloudflare = {path = "../../../certbot-dns-cloudflare"}
-certbot-dns-cloudxns = {path = "../../../certbot-dns-cloudxns"}
 certbot-dns-digitalocean = {path = "../../../certbot-dns-digitalocean"}
 certbot-dns-dnsimple = {path = "../../../certbot-dns-dnsimple"}
 certbot-dns-dnsmadeeasy = {path = "../../../certbot-dns-dnsmadeeasy"}

tools/venv.py

@@ -27,7 +27,6 @@ REQUIREMENTS = [
     '-e certbot[all]',
     '-e certbot-apache',
     '-e certbot-dns-cloudflare',
-    '-e certbot-dns-cloudxns',
     '-e certbot-dns-digitalocean',
     '-e certbot-dns-dnsimple',
     '-e certbot-dns-dnsmadeeasy',

tox.cover.py

@@ -7,7 +7,7 @@ import subprocess
 import sys
 
 DEFAULT_PACKAGES = [
-    'certbot', 'acme', 'certbot_apache', 'certbot_dns_cloudflare', 'certbot_dns_cloudxns',
+    'certbot', 'acme', 'certbot_apache', 'certbot_dns_cloudflare',
     'certbot_dns_digitalocean', 'certbot_dns_dnsimple', 'certbot_dns_dnsmadeeasy',
     'certbot_dns_gehirn', 'certbot_dns_google', 'certbot_dns_linode', 'certbot_dns_luadns',
     'certbot_dns_nsone', 'certbot_dns_ovh', 'certbot_dns_rfc2136', 'certbot_dns_route53',
@@ -18,7 +18,6 @@ COVER_THRESHOLDS = {
     'acme': {'linux': 100, 'windows': 99},
     'certbot_apache': {'linux': 100, 'windows': 100},
     'certbot_dns_cloudflare': {'linux': 98, 'windows': 98},
-    'certbot_dns_cloudxns': {'linux': 98, 'windows': 98},
     'certbot_dns_digitalocean': {'linux': 98, 'windows': 98},
     'certbot_dns_dnsimple': {'linux': 98, 'windows': 98},
     'certbot_dns_dnsmadeeasy': {'linux': 99, 'windows': 99},

tox.ini

@@ -17,10 +17,10 @@ install_and_test = python {toxinidir}/tools/install_and_test.py
 # Packages are listed on one line because tox seems to have inconsistent
 # behavior with substitutions that contain line continuations, see
 # https://github.com/tox-dev/tox/issues/2069 for more info.
-dns_packages = certbot-dns-cloudflare certbot-dns-cloudxns certbot-dns-digitalocean certbot-dns-dnsimple certbot-dns-dnsmadeeasy certbot-dns-gehirn certbot-dns-google certbot-dns-linode certbot-dns-luadns certbot-dns-nsone certbot-dns-ovh certbot-dns-rfc2136 certbot-dns-route53 certbot-dns-sakuracloud
+dns_packages = certbot-dns-cloudflare certbot-dns-digitalocean certbot-dns-dnsimple certbot-dns-dnsmadeeasy certbot-dns-gehirn certbot-dns-google certbot-dns-linode certbot-dns-luadns certbot-dns-nsone certbot-dns-ovh certbot-dns-rfc2136 certbot-dns-route53 certbot-dns-sakuracloud
 win_all_packages = acme[test] certbot[test] {[base]dns_packages} certbot-nginx
 all_packages = {[base]win_all_packages} certbot-apache
-source_paths = acme/acme certbot/certbot certbot-apache/certbot_apache certbot-ci/certbot_integration_tests certbot-ci/snap_integration_tests certbot-ci/windows_installer_integration_tests certbot-compatibility-test/certbot_compatibility_test certbot-dns-cloudflare/certbot_dns_cloudflare certbot-dns-cloudxns/certbot_dns_cloudxns certbot-dns-digitalocean/certbot_dns_digitalocean certbot-dns-dnsimple/certbot_dns_dnsimple certbot-dns-dnsmadeeasy/certbot_dns_dnsmadeeasy certbot-dns-gehirn/certbot_dns_gehirn certbot-dns-google/certbot_dns_google certbot-dns-linode/certbot_dns_linode certbot-dns-luadns/certbot_dns_luadns certbot-dns-nsone/certbot_dns_nsone certbot-dns-ovh/certbot_dns_ovh certbot-dns-rfc2136/certbot_dns_rfc2136 certbot-dns-route53/certbot_dns_route53 certbot-dns-sakuracloud/certbot_dns_sakuracloud certbot-nginx/certbot_nginx tests/lock_test.py
+source_paths = acme/acme certbot/certbot certbot-apache/certbot_apache certbot-ci/certbot_integration_tests certbot-ci/snap_integration_tests certbot-ci/windows_installer_integration_tests certbot-compatibility-test/certbot_compatibility_test certbot-dns-cloudflare/certbot_dns_cloudflare certbot-dns-digitalocean/certbot_dns_digitalocean certbot-dns-dnsimple/certbot_dns_dnsimple certbot-dns-dnsmadeeasy/certbot_dns_dnsmadeeasy certbot-dns-gehirn/certbot_dns_gehirn certbot-dns-google/certbot_dns_google certbot-dns-linode/certbot_dns_linode certbot-dns-luadns/certbot_dns_luadns certbot-dns-nsone/certbot_dns_nsone certbot-dns-ovh/certbot_dns_ovh certbot-dns-rfc2136/certbot_dns_rfc2136 certbot-dns-route53/certbot_dns_route53 certbot-dns-sakuracloud/certbot_dns_sakuracloud certbot-nginx/certbot_nginx tests/lock_test.py
 
 [testenv]
 passenv =