mirror of
https://github.com/esp8266/Arduino.git
synced 2025-04-21 10:26:06 +03:00
04fe8e8b58
This includes empty stubs for most core Arduino functions. Need to actually implement all those digital reads writes whatever. Need to prebuild toolchains (xtensa-elf-lx106) for 3 platforms and put them on some download server. Need to do the same with esptool. Need to fix 0x40000 binary generation and add correct upload commands. Maybe even implement uploads over WiFi.
119 lines
3.5 KiB
C++
119 lines
3.5 KiB
C++
/*
|
|
SD card test
|
|
|
|
This example shows how use the utility libraries on which the'
|
|
SD library is based in order to get info about your SD card.
|
|
Very useful for testing a card when you're not sure whether its working or not.
|
|
|
|
The circuit:
|
|
* SD card attached to SPI bus as follows:
|
|
** MOSI - pin 11 on Arduino Uno/Duemilanove/Diecimila
|
|
** MISO - pin 12 on Arduino Uno/Duemilanove/Diecimila
|
|
** CLK - pin 13 on Arduino Uno/Duemilanove/Diecimila
|
|
** CS - depends on your SD card shield or module.
|
|
Pin 4 used here for consistency with other Arduino examples
|
|
|
|
|
|
created 28 Mar 2011
|
|
by Limor Fried
|
|
modified 9 Apr 2012
|
|
by Tom Igoe
|
|
*/
|
|
// include the SD library:
|
|
#include <SPI.h>
|
|
#include <SD.h>
|
|
|
|
// set up variables using the SD utility library functions:
|
|
Sd2Card card;
|
|
SdVolume volume;
|
|
SdFile root;
|
|
|
|
// change this to match your SD shield or module;
|
|
// Arduino Ethernet shield: pin 4
|
|
// Adafruit SD shields and modules: pin 10
|
|
// Sparkfun SD shield: pin 8
|
|
const int chipSelect = 4;
|
|
|
|
void setup()
|
|
{
|
|
// Open serial communications and wait for port to open:
|
|
Serial.begin(9600);
|
|
while (!Serial) {
|
|
; // wait for serial port to connect. Needed for Leonardo only
|
|
}
|
|
|
|
|
|
Serial.print("\nInitializing SD card...");
|
|
// On the Ethernet Shield, CS is pin 4. It's set as an output by default.
|
|
// Note that even if it's not used as the CS pin, the hardware SS pin
|
|
// (10 on most Arduino boards, 53 on the Mega) must be left as an output
|
|
// or the SD library functions will not work.
|
|
pinMode(10, OUTPUT); // change this to 53 on a mega
|
|
|
|
|
|
// we'll use the initialization code from the utility libraries
|
|
// since we're just testing if the card is working!
|
|
if (!card.init(SPI_HALF_SPEED, chipSelect)) {
|
|
Serial.println("initialization failed. Things to check:");
|
|
Serial.println("* is a card is inserted?");
|
|
Serial.println("* Is your wiring correct?");
|
|
Serial.println("* did you change the chipSelect pin to match your shield or module?");
|
|
return;
|
|
} else {
|
|
Serial.println("Wiring is correct and a card is present.");
|
|
}
|
|
|
|
// print the type of card
|
|
Serial.print("\nCard type: ");
|
|
switch (card.type()) {
|
|
case SD_CARD_TYPE_SD1:
|
|
Serial.println("SD1");
|
|
break;
|
|
case SD_CARD_TYPE_SD2:
|
|
Serial.println("SD2");
|
|
break;
|
|
case SD_CARD_TYPE_SDHC:
|
|
Serial.println("SDHC");
|
|
break;
|
|
default:
|
|
Serial.println("Unknown");
|
|
}
|
|
|
|
// Now we will try to open the 'volume'/'partition' - it should be FAT16 or FAT32
|
|
if (!volume.init(card)) {
|
|
Serial.println("Could not find FAT16/FAT32 partition.\nMake sure you've formatted the card");
|
|
return;
|
|
}
|
|
|
|
|
|
// print the type and size of the first FAT-type volume
|
|
uint32_t volumesize;
|
|
Serial.print("\nVolume type is FAT");
|
|
Serial.println(volume.fatType(), DEC);
|
|
Serial.println();
|
|
|
|
volumesize = volume.blocksPerCluster(); // clusters are collections of blocks
|
|
volumesize *= volume.clusterCount(); // we'll have a lot of clusters
|
|
volumesize *= 512; // SD card blocks are always 512 bytes
|
|
Serial.print("Volume size (bytes): ");
|
|
Serial.println(volumesize);
|
|
Serial.print("Volume size (Kbytes): ");
|
|
volumesize /= 1024;
|
|
Serial.println(volumesize);
|
|
Serial.print("Volume size (Mbytes): ");
|
|
volumesize /= 1024;
|
|
Serial.println(volumesize);
|
|
|
|
|
|
Serial.println("\nFiles found on the card (name, date and size in bytes): ");
|
|
root.openRoot(volume);
|
|
|
|
// list all files in the card with date and size
|
|
root.ls(LS_R | LS_DATE | LS_SIZE);
|
|
}
|
|
|
|
|
|
void loop(void) {
|
|
|
|
}
|