esp8266/libraries/TFT_Touch_Shield_V2/examples/tftbmp/tftbmp.ino

/*
  TFT Touch Shield 2.0 examples - tftbmp
  
  loovee
  2013-1-21
  
  this demo can show specified bmp file in root Directory of SD card
  please ensure that your image file is 320x240 size. 

  change __Gnfile_num and __Gsbmp_files to display your image
*/

#include <SD.h>
#include <SPI.h>
#include <Streaming.h>

#include "TFTv2.h"

#define MAX_BMP         10                      // bmp file num
#define FILENAME_LEN    20                      // max file name length


const int PIN_SD_CS = 4;                        // pin of sd card

const int __Gnbmp_height = 320;                 // bmp hight
const int __Gnbmp_width  = 240;                 // bmp width

unsigned char __Gnbmp_image_offset  = 0;        // offset


int __Gnfile_num = 3;                           // num of file

char __Gsbmp_files[3][FILENAME_LEN] =           // add file name here
{
"flower.BMP",
"hibiscus.bmp",
"test.bmp",
};


File bmpFile;


void setup()
{

    Serial.begin(9600);
    
    pinMode(PIN_SD_CS,OUTPUT);
    digitalWrite(PIN_SD_CS,HIGH);

    Tft.TFTinit();

    Sd2Card card;
    card.init(SPI_FULL_SPEED, PIN_SD_CS); 
    
    if(!SD.begin(PIN_SD_CS))              
    { 
        Serial.println("failed!");
        while(1);                               // init fail, die here
    }
    
    Serial.println("SD OK!");

    TFT_BL_ON;
}

void loop()
{
    for(unsigned char i=0; i<__Gnfile_num; i++)
    {
        bmpFile = SD.open(__Gsbmp_files[i]);
        if (! bmpFile)
        {
            Serial.println("didnt find image");
            while (1);
        }

        if(! bmpReadHeader(bmpFile)) 
        {
            Serial.println("bad bmp");
            return;
        }

        bmpdraw(bmpFile, 0, 0);
        bmpFile.close();

        delay(1000);
    }

}

/*********************************************/
// This procedure reads a bitmap and draws it to the screen
// its sped up by reading many pixels worth of data at a time
// instead of just one pixel at a time. increading the buffer takes
// more RAM but makes the drawing a little faster. 20 pixels' worth
// is probably a good place

#define BUFFPIXEL       60                      // must be a divisor of 240 
#define BUFFPIXEL_X3    180                     // BUFFPIXELx3

void bmpdraw(File f, int x, int y)
{
    bmpFile.seek(__Gnbmp_image_offset);

    uint32_t time = millis();

    uint8_t sdbuffer[BUFFPIXEL_X3];                 // 3 * pixels to buffer

    for (int i=0; i< __Gnbmp_height; i++)
    {

        for(int j=0; j<(240/BUFFPIXEL); j++)
        {
            bmpFile.read(sdbuffer, BUFFPIXEL_X3);
            uint8_t buffidx = 0;
            int offset_x = j*BUFFPIXEL;
            
            unsigned int __color[BUFFPIXEL];
            
            for(int k=0; k<BUFFPIXEL; k++)
            {
                __color[k] = sdbuffer[buffidx+2]>>3;                        // read
                __color[k] = __color[k]<<6 | (sdbuffer[buffidx+1]>>2);      // green
                __color[k] = __color[k]<<5 | (sdbuffer[buffidx+0]>>3);      // blue
                
                buffidx += 3;
            }

            Tft.setCol(offset_x, offset_x+BUFFPIXEL);
            Tft.setPage(i, i);
            Tft.sendCMD(0x2c);                                                  
            
            TFT_DC_HIGH;
            TFT_CS_LOW;

            for(int m=0; m < BUFFPIXEL; m++)
            {
                SPI.transfer(__color[m]>>8);
                SPI.transfer(__color[m]);
            }

            TFT_CS_HIGH;
        }
        
    }
    
    Serial.print(millis() - time, DEC);
    Serial.println(" ms");
}

boolean bmpReadHeader(File f) 
{
    // read header
    uint32_t tmp;
    uint8_t bmpDepth;
    
    if (read16(f) != 0x4D42) {
        // magic bytes missing
        return false;
    }

    // read file size
    tmp = read32(f);
    Serial.print("size 0x");
    Serial.println(tmp, HEX);

    // read and ignore creator bytes
    read32(f);

    __Gnbmp_image_offset = read32(f);
    Serial.print("offset ");
    Serial.println(__Gnbmp_image_offset, DEC);

    // read DIB header
    tmp = read32(f);
    Serial.print("header size ");
    Serial.println(tmp, DEC);
    
    
    int bmp_width = read32(f);
    int bmp_height = read32(f);
    
    if(bmp_width != __Gnbmp_width || bmp_height != __Gnbmp_height)      // if image is not 320x240, return false
    {
        return false;
    }

    if (read16(f) != 1)
    return false;

    bmpDepth = read16(f);
    Serial.print("bitdepth ");
    Serial.println(bmpDepth, DEC);

    if (read32(f) != 0) {
        // compression not supported!
        return false;
    }

    Serial.print("compression ");
    Serial.println(tmp, DEC);

    return true;
}

/*********************************************/
// These read data from the SD card file and convert them to big endian
// (the data is stored in little endian format!)

// LITTLE ENDIAN!
uint16_t read16(File f)
{
    uint16_t d;
    uint8_t b;
    b = f.read();
    d = f.read();
    d <<= 8;
    d |= b;
    return d;
}

// LITTLE ENDIAN!
uint32_t read32(File f)
{
    uint32_t d;
    uint16_t b;

    b = read16(f);
    d = read16(f);
    d <<= 16;
    d |= b;
    return d;
}