:orphan:

Server Class
------------

Methods documented for the `Server Class <https://www.arduino.cc/en/Reference/WiFiServerConstructor>`__ in `Arduino <https://github.com/arduino/Arduino>`__

1. `WiFiServer() <https://www.arduino.cc/en/Reference/WiFiServer>`__
2. `begin() <https://www.arduino.cc/en/Reference/WiFiServerBegin>`__
3. `available() <https://www.arduino.cc/en/Reference/WiFiServerAvailable>`__
4. `write() <https://www.arduino.cc/en/Reference/WiFiServerWrite>`__
5. `print() <https://www.arduino.cc/en/Reference/WiFiServerPrint>`__
6. `println() <https://www.arduino.cc/en/Reference/WiFiServerPrintln>`__

Methods and properties described further down are specific to ESP8266. They are not covered in `Arduino WiFi library <https://www.arduino.cc/en/Reference/WiFi>`__ documentation. Before they are fully documented please refer to information below.

setNoDelay
~~~~~~~~~~

.. code:: cpp

    setNoDelay(nodelay)

With ``nodelay`` set to ``true``, this function will to disable `Nagle algorithm <https://en.wikipedia.org/wiki/Nagle%27s_algorithm>`__.

This algorithm is intended to reduce TCP/IP traffic of small packets sent over the network by combining a number of small outgoing messages, and sending them all at once. The downside of such approach is effectively delaying individual messages until a big enough packet is assembled.

*Example:*

.. code:: cpp

    server.begin();
    server.setNoDelay(true);

Other Function Calls
~~~~~~~~~~~~~~~~~~~~

.. code:: cpp

    bool  hasClient () 
    bool  getNoDelay () 
    virtual size_t  write (const uint8_t *buf, size_t size) 
    uint8_t  status () 
    void  close () 
    void  stop ()

Documentation for the above functions is not yet prepared.

For code samples please refer to separate section with `examples <server-examples.rst>`__ dedicated specifically to the Server Class.