* Release referenced resources in destructor
* Release referenced resources in destructor, corrected for IPV6
* Release referenced resources in destructor, per suggested changes
* Fixes 1.1
- Better separation of ESP wifi thread code from user thread code
- Added a flag for 'update()'-less use (disabled by default)
- The too fast updates for service queries are fixed
- Switched fully to PolledTimeout; LEATimeFlag not needed anymore (BTW: a const 'expired()' method would be helpful)
- The device should stay visible now even after the first TTL timeout
- Improved service querying (queries five times now)
* Update mDNS_Clock.ino
Removed references to LEATimeFlag.h
* Update mDNS_Clock.ino
Styling
* DNSServer: Handle examplewww.com correctly
Just replacing 'www.' with the empty string when we assign the
domainname will remove all occurrences of 'www.', not just those
at the start of the string.
Change this to a startsWith check so that only "www." at the
beginning of the string is removed.
* DNSServer: Rework request handling
Rewrite the request handling in the DNSServer code to address the
following issues:
Compatibility with EDNS #1:
RFC6891 says that
"Responders that choose not to implement the protocol
extensions defined in this document MUST respond with a
return code (RCODE) of FORMERR to messages containing an
OPT record in the additional section and MUST NOT include an
OPT record in the response"
If we have any additional records in the request, then we need
to return a FORMERR, and not whatever custom error code the user
may have set.
Compatibility with EDNS #2:
If we're returning an error, we need to explicitly zero all of
the record counters. In the existing code, if there is an
additional record present in the request, we return an ARCOUNT
of 1 in the response, despite including no additional records
in the payload.
Don't answer non-A requests
If we receive an AAAA request (or any other non-A record)
requests, we shouldn't respond to it with an A record.
Don't answer non-IN requests
If we receive a request for a non-IN type, don't answer it
(it's unlikely that we'd see this in the real world)
Don't read off the end of malformed packets
If a packet claims to have a query, but then doesn't include
one, or includes a query with malformed labels, don't read off
the end of the allocated data structure.
* DNSServer: Clarify and tidy writing the answer record
Modify the code used to write the answer record back to the server
so that it is clearer that we are writing network byte order
16-bit quantities, and to clarify what's happening with the pointer
used at the start of the answer.
* uart fixes and BW improvements
* uart: read_char straightly use hw buffer
* +attributes for functions called by ISR
* uart: BW improvements
read_char straightly use hw buffer (+ ~10%bw)
read by block (+ ~190%bw) (instead of generic Stream::readBytes)
attributes for functions called by ISR
remove overrun message
remove some ISR flags which were not honoured
* fix merge
* fix buffer overflow
* serial stress test sketch
* astyle
* serial stress example: interactive keyboard, stop reading, overrun
* serial device test: bandwidth & overrun
* update + HardwareSerial::hasError()
* interactive overrun in example
* astyle
* Test using @plerup's SoftwareSerial as submodule (tag 3.4.1)
* update upstream ref (fix warning)
* host mock uart/read(buf,size)
* reset style changes in submodules before style diff
* update build_boards_manager_package.sh for submodules
* trigger CI (removing space)
* cannot reproduce locally the CI issue, setting bash -x option to get live trace
* remove previously added (in this PR) 'set -e' in package builder (passes local tests, not real CI)
script-comment new recipe.hooks.core.prebuild.3 (along with already commented .1 and .2)
moved CI package test to be first on the test list
remove 'set -x', wish me luck
The bug referenced in the code that required a custom macro to enable
PSTR/PROGMEM compilation ( https://github.com/esp8266/Arduino/issues/3369 )
was fixed a while back and all PROGMEM references now live in their own
save .sections.
This patch simply is the output of `sed -i s/PSTR_LEA/PSTR/g *` and
`sed -i s/PROGMEM_LEA/PROGMEM/g *` on the codebase and the removal
of those defines.
* LEAmDNS Responder (II)
Created a new branch to solve commit conflicts with recent changes to ESP8266mDNSResponder.cpp by d-a-v.
* Removed millis() roll-over issues
* fix LEA-mDNS
* astyle on lea-mdns examples
* add compatibility with lwIP-v1
* ditto
* use strncasecmp instead of lwip's strnicmp from lwIP-v2 (thanks @devyte)
* ditto
* fixes
* Update mDNS_Clock.ino
unindent
* Update mDNS_ServiceMonitor.ino
unindent
* Update LEAmDNS.h
Add setInstanceName() forwarder for compat
* Disable DEBUG_ESP_MDNS_RESPONDER by default
* [Fixed] Debug output line
DEBUG_OUTPUT needs to go inside DEBUG_EX_ function otherwise throw error if DEBUG_ESP_MDNS_RESPONDER is not defined
* weak hook early_setup() #2111#2133#2136
* rename to early_init (more "c" vs early_setup which is more "c++arduino")
* example
* improve earlyWiFi example, slightly change AddrList interface, move WiFi sketches into WiFi examples
* fix CI
* fix local CI runner
* fix local CI runner
* rename early_init() to preinit()
* + static ESP8266WiFiClass::preinit_wifi_off()
* update early disable wifi example
* example update
* IPv6 example update
* Update ESP8266WiFiGeneric.h
camelCase for static method name
* Update ESP8266WiFiGeneric.cpp
camelCase for static method name
* Update EarlyDisableWiFi.ino
Expand comment, fix static method name
* Update core_esp8266_main.cpp
Expanded comment.
* Update core_esp8266_main.cpp
Expanded comment
* Update EarlyDisableWiFi.ino
Expanded comment
Using a pluggable architecture, allow updates delivered via the Update
class to be verified as signed by a certificate. By using plugins, avoid
pulling either axTLS or BearSSL into normal builds.
A signature is appended to a binary image, followed by the size of the
signature as a 32-bit int. The updater takes a verification function
and checks this signature using whatever method it chooses, and if it
fails the update is not applied.
A SHA256 hash class is presently implemented for the signing hash (since
MD5 is a busted algorithm).
A BearSSLPublicKey based verifier is implemented for RSA keys. The
application only needs the Public Key, while to sign you can use
OpenSSL and your private key (which should never leave your control
or be deployed on any endpoints).
An example using automatic signing is included.
Update the docs to show the signing steps and how to use it in the
automatic and manual modes.
Also remove one debugging line from the signing tool.
Saves ~600 bytes when in debug mode by moving strings to PMEM
Windows can't run the signing script, nor does it normally have OpenSSL
installed. When trying to build an automatically signed binary, warn
and don't run the python.
* restore definition of ip_addr (=ipv4_addr) when IPv6 is not enabled
* overload IPAddress:operator == and != to avoid ambiguousness
* brings lwIP's INADDR_NONE (which is IPv4 255.255.255.255, suposed to be invalid address but it is)
* inet_aton is a lwIP define, rename Ethernet DNS implementation of this to prevent name collision
that's because IPAddress now includes lwip/inet.h
I recently starting playing around with a few esp8266-01s and tried to use the SSDP libraries to work with Smarthings discovery:
https://docs.smartthings.com/en/latest/cloud-and-lan-connected-device-types-developers-guide/building-lan-connected-device-types/building-the-service-manager.html
on the docs there are example grovy files that do simple service discovery, i was not able to get SSDP to work correctly, though i was able to find some other projects that did (python fauxmo works for alexa, but with modifications i was able to make it work for custom devices in ST).
after digging to figure out why the python code was working and the ESP SSDP lib was not i noticed there is a string comparison in the grovy file and it was failing to match the udn with the original usn device id. The ST groovy code could be changed to remedy this problem but i wonder if it should be fixed here, because so many other examples of SSDP discovery take care in ensuring the usn and udn match exactly.
___________
Summary, I think the USN and UDN values should match exactly. This will fix issues, allowing for much easier integration with smart hubs that need the device ids to match. Allowing me to use these libraries and not need to roll a custom SSDP handler.
Content length provides context into the size of the upload, it's not
the exact form body size it's off by the request header info, but it was
already parsed by the library and provides little to no additional
overhead to pass on for use in request handlers.
Currently post args are only available at the end of upload but they are already listed - this PR just expose them with minimal changes
It also set a define for post args array size originaly set to 32
Many objects now expect a WiFiClient* object to be passed to them and
potentially re-used multiple times (HTTPClient, others). Clearing the
authentication options on a ::stop means they can never reconnect.
Remove the option clearing in ::stop
Fixes#5379
* PolledTimeout Class for wrapping millis() loops
* Add yield policies, improve reset, add host tests
* Fix copyright, comments
* adjust host tests for better time precision
* add fuzzyness to timing tests for CI jitter
* add blink example with polledTimeout
* improve namespace and type naming, add copyright, comments
* fix astyle
