Fix/clarify comments.
Fix redundancies in Tone, end Tone waveform on exact period limit for proper sound.
Fix redundancies in wiring_pwmExtend Servo to map in-use pins, Tone already has this.
Added meta viewport element for better mobile device viewing.
For example CaptivePortalAdvanced, increased size of ssid and password array
to hold maximums 32 and 64 charcter strings. Added missing HTML elments
to main splash and wifi config. They should now pass an HTML checker.
Also added meta viewport element for better mobile device viewing.
Fixes exception 28 in IPAddress(const ipv4_addr* fw_addr); with null ip_addr
pointer passed in by WiFiCient.cpp localIP(). I assumed that localIP()
was called shortly after _pcb became null.
The OTA script was not reporting the actual reported upload status from
the ESP8266, and instead always printed "Result: OK" no matter what
happened.
Now check for ERROR or OK in final message (and ensure the message is
not accidentally merged with the final byte count) and report properly.
Fixes#7162
* Allow waveforms to be specified in clock cycles
Allow the PWM to specify sub-microsecond waveform edges, as have been
proposed by @dok-net and me. No other changes intended.
This will increase the linearity at 30 and 40 kHZ PWM rates, but leave
most other things unaffected.
* Cycle-accurate wafveform to specify Tone periods
Co-authored-by: Develo <deveyes@gmail.com>
* At least the F_CPU define in host mock.h is needed by host Arduino.h - need to include Arduino.h further down in mock.h for this to work.
* Geting the include order right
* Prepare for runtime CPU clock rate selection
* Fix compile for not defined F_CPU
If defined F_CPU, make getCpuFreqMHz() a constexpr
* Use defines for register CPU2X instead of hex value
* Fix build for host - getCpuFreqMHz there was also in conflict with getCycleCount, using F_CPU:
tests/host/common/mock.h:#define F_CPU 80000000 (!)
* Asymmetrical includes and defines on host
* Support restart switch from 160MHz to 80MHz, e.g for OTA. Fixes#579
lwIP's tcp/udp_connect() and tcp/udp_bind() functions automatically
set the zone if it is required but missing, but udp_connect() is not
used so this doesn't happen.
Explicitly set the zone to the default network interface if it is
required for the type of address being used. Otherwise there is no
zone set and packets to a link local destination don't go anywhere.
* Make DNS resolution order selectable during runtime or compile time (only in dual stack mode).
* Extend IPv6 example to show usage of new hostByName function with selectable resolving order
* Fix function definition of fqdn_rt in IPv6.ino.
* Fix function call.
* Fix missing bracket...
* Only run if built with dual stack support
* Make DNS resolution order selectable during runtime or compile time (only in dual stack mode).
* Extend IPv6 example to show usage of new hostByName function with selectable resolving order
* Fix function definition of fqdn_rt in IPv6 example.
* Implement enum class for resolve type
* Fix example IPv6.ino
* Fix typedef in ESP8266WiFiGeneric.h function call
* Change enum class definition to not depend on lwip/dns.h
* Move err_t err definition outside switch. Fix typecast.
* Always define DNSResolveType as pio test otherwise failes even if the enum class isn't used.
Co-authored-by: altelch <heiko.krupp@rhrk.uni-kl.de>
Co-authored-by: david gauchard <gauchard@laas.fr>
* wifi: ARP gratuitous API for wifi station mode
* fix with lwip1
* update comment
* update API to allow changing interval on the fly
* update API
* remove debug lines
* mock lwIP's etharp_request()
* unsigned interval
* use scheduled ticker
* ticker: +attach_ms_scheduled_accurate
ticker: +comment
gratuitous: use attach_ms_scheduled_accurate
* move to experimental namespace
* fix for lwIP-v1.4
* attempt to make pio happy
* use directly ETSTimer instead of Ticker
* Add way to force follow redirections in `HTTPClient`
* Follow other client implementations about `HTTP_CODE_FOUND`; Small rewrite of `sendRequest` function of `HTTPClient`
* Better names for follow redirection modes in `HTTPClient`
Also changed a bit order of the enums (0 element to be DISABLED)
* Rewrite `sendRequest` to remove recursion
Also got rid of unnecessary `redirectCount` field. Now redirect counting and limiting is handled in `sendRequest` directly.
* Use new `setFollowRedirects` of `HTTPClient` instead deprecated one.
* More explanatory comment for `followRedirects_t` in HTTPClient
* Pull GPIO initialization into its own 'weak' function.
By pulling GPIO init into its own weak function, it can be overridden by the user. This is important in cases when GPIOs should not toggle during reboot, exceptions or other crashes. Fixes#7041.
* Add prototype for resetPins()
* Use 2nd stack for update signature verification
Fixes#7145
When doing a signed update, the signature calculation can use a lot of
stack, so move it silently to the BearSSL second stack.
Also fix a memory leak of signature-bytes found by @JiriBilek
* Reset state on any error condition in Updater::end
* MultiDelegate breaking change and improvements.
The event-multiplexer specialization no longer removes items based on invoke return value.
This is mitigated by new iterators and erase(iterator). Check the documentation comments for
details.
* MultiDelegate: constness on return type warning fix.
* EspSoftwareSerial: Conform to C++ 17 and later.
* EspSoftwareSerial: Resolve g++ 9's c++17 deprecation warnings.
* EspSoftwareSerial, Delegate.h: gcc 9.2 is very strict about template inheritance of ctor and assignment operators, needing a lot
of code duplication, this commit provides that.
* Delegate.h, fix both ambiguous operator= and infinite ctor recursion.
* EspSoftwareSerial release 6.7.2
* Update Uri.h
* Add a simple test for the new constructor
Convert a c-str to a FPSTR in the example to have a section
of code in our CI that will catch any future breaks of this specific
kind.
Co-authored-by: Earle F. Philhower, III <earlephilhower@yahoo.com>
Previously, when the path was a directory, but didn't have a slash at
the end, a 0 byte response would be sent when using LittleFS. Now, it
will return a 404, like was always the case when using SPIFFS.
* Resolved issue #3359
Made severing connections optional as per the patch
in the issue.
Also fixed a minor spacing issue.
* Renamed sever to close and added information to readme
Also my editor automatically removed some odd whitespace at the
end of a few lines.
* Add fileCreation/getCreation create-time accessors
For SDFS and LittleFS, enable a creation time accessor for files and Dir
iterators, similar to the existing fileTime/getLastWrite calls.
Remove spurious Dir::getLastWrite method (the proper and only documented
way is really Dir::fileTime).
Update json to point to new mklittlefs which copies the creation date of
files to the image.
Fixes#6992
* Remove malloc(), use stack vars for temp names
LFS filenames are limited in size and generally very small. Use a stack
variable instead of a dynamic allocation when performing full-path
computations.
* Replace "Creation" w/"CreationTime" in FS accessor
Per review, `getCreation` -> `getCreationTime`, `fileCreation` ->
`fileCreationTime`.
The names `fileTime()` and `getLastWrite()` are inherited from ESP32
implementation and unchanged.
* Add creation time to listfiles SD example
* Enable SdFat's sateTime callback for timestamping
SdFat requries the dateTimeCallback call (global for everything) to
update dates and times on created files.
Because the callback signature doesn't have space for us to provide
any parameters, we cannot get the the File, Dir, or FS object's
dateTimeCB member. Instead, just go with `time(null)` as the callback
function which is right in all but the most esoteric cases.
* Correct DOS year/month offset in dateTime callback
* Fix docs to match new xxxCreationTime() API names
Co-authored-by: Develo <deveyes@gmail.com>
* Add path args
* Add example
* Update code format
* Add missing include
* Fix codestyle and unsigned int
* fix unsigned int
* Remove tabs
* use vector<>.resize
* rename j to requestUriIndex
* using assert checking the path argument index
* Add missing include "assert.h"
* The order no longer matters.
Path arguments may not contain the value '/'
Updated the example
* make pathArg return a const
* Update PathArgServer.ino
fix trailing space
* const String&
* Add regex support
* Fix to match templating
* Add Uri with support for staticUri, regexUri and globUri
* Update example
* Add deconstructor to remove _uri pointer
* Add newline to end of files
* Suppress gcc warnings (unused params)
* Replace regex with regex.h
* Use the standard STASSID/PSK settings for example
Make the example match the existing examples which allow setting
the SSID/PSK in the local platform.txt file.
* Use 115.2Kbaud for example, match others
Co-authored-by: david gauchard <gauchard@laas.fr>
Co-authored-by: Earle F. Philhower, III <earlephilhower@yahoo.com>
