* Track breaking API chance in EspSoftwareSerial.
* Revert "Track breaking API chance in EspSoftwareSerial."
This reverts commit 78aa3e8432.
* Track breaking API chance in EspSoftwareSerial.
* Bug fix in EspSoftwareSerial
* EspSoftwareSerial: improved memory fences
* Refactoring upstream
* EspSoftwareSerial fixed a high-bitrate error source, probably caused by end-bit detection
without checking for same-level timestamps from the IRQ
* EspSoftwareSerial examples updates
* Fix to stop bit detection in EspSoftwareSerial
* Latest bit timings fix in EspSoftwareSerial.
* EspSoftwareSerial examples
* EspSoftwareSerial latest throughput results in comments of loopback.ino
* Lastest EspSoftwareSerial, dependent on a few as yet unmerged PRs, tho
* Submodule EspSoftwareSerial release 5.2.0 with workaround for as yet missing attachInterruptArg in Arduino.h
* EspSoftwareSerial release 5.2.0, includes workaround for missing attachInterruptArg in ESP8266 Arduino
* EspSoftwareSerial: CI failed on examples - defines for Wemos board GPIOs.
* Updated Example to use ArduinoJson6
* Updated save method to Serialize and not Deserialize
* Updated References to ArduinoJson 6.11.0
* Style Fix
* another line missed
* Added the file extension to the new version
* Update EspSoftwareSerial to release 5.0.0.
(Includes half-duplex patch for SerialStress.ino)
* Updated EspSoftwareSerial to allow Platformio builds that lack defaults for RX/TX defines.
* polledTimeout: add option to use CPU count instead of millis()
* use more "using" alias
* more c++/clear code, using typename (thanks @devyte)
* rename class name to include unit, introduce timeMax() and check it with assert()
* remove useless defines
* improve api readability, add micro-second unit
* update example
* mock: emulate getCycleCount, add/fix polledTimeout CI test
* + nano-seconds, assert -> message, comments, host test
* allow 0 for timeout (enables immediate timeout, fix division by 0)
* typo, set member instead of local variable
* unify error message
* slight change on checkExpired() allows "never expired"
also removed printed message, add YieldAndDelay, simplify calculations
* remove traces of debug.h/cpp in this PR
* include missing <limits> header
* back to original expired test, introduce boolean _neverExpires, fix reset(), getTimeout() is invalid
* fix expiredOneShot with _timeout==0 check
* reenable getTimeout()
* expose checkExpired with unit conversion
* fix timing comments, move critical code to iram
* add member ::neverExpires and use it where relevant
* improve clarity
* remove exposed checkExpired(), adapt LEAmDNS with equivalent
* add API ::resetToNeverExpires(), use it in LEAmDNS
* remove offending constness from ::flagged() LEAmDNS (due do API fix in PolledTimeout)
* simplify "Fast" base classes
* minor variable rename
* Fix examples
* compliance with good c++ manners
* minor changes for consistency
* add missing const
* expired() and bool() moved to iram
* constexpr compensation computing
* add/update comments
* move neverExpires and alwaysExpired
* Add a FAT filesystem for SD cards to Arduino FS
Arduino forked a copy of SD lib several years ago, put their own wrapper
around it, and it's been languishing in our ESP8266 libraries ever since
as SD. It doesn't support long file names, has class names which
conflict with the ESP8266 internal names, and hasn't been updated in
ages.
The original author of the SD library has continued work in the
meantime, and produced a very feature rich implementation of SdFat. It
unfortunately also conflicts with the class names we use in ESP8266
Arduino and has a different API than the internal SPIFFS or proposed
LittleFS filesystem objects.
This PR puts a wrapper around the latest and greatest SdFat library,
by forking it and wrapping its classes in a private namespace "sdfat,"
and making as thin a wrapper as possible around it to conform to
the ESP8266 FS, File, and Dir classes.
This PR also removes the Arduino SD.h class library and rewrites it
using the new SDFS filesystem to make everything in the ESP8266
Arduino core compatible with each other.
By doing so it lets us use a single interface for anything needing a
file instead of multiple ones (see SDWebServer and how a different
object is needed vs. one serving from SPIFFS even though the logic is
all the same). Same for BearSSL's CertStores and probably a few others
I've missed, cleaning up our code base significantly.
Like LittleFS, silently create directories when a file is created with
a subdirectory specifier ("/path/to/file.txt") if they do not yet exist.
Adds a blacklist of sketches to skip in the CI process (because SdFat
has many examples which do not build properly on the ESP8266).
Now that LittleFS and SDFS have directory support, the FS needs to be
able to communicate whether a name is one or the other. Add a simple
bool FS::isDirectory() and bool FS::isFile() method. SPIFFS doesn't
have directories, so if it's valid it's a file and reported as such.
Add ::mkdir/::rmdir to the FS class to allow users to make and destroy
subdirectories. SPIFFS directory operations will, of course, fail
and return false.
Emulate a 16MB SD card and allow test runner to exercise it by using
a custom SdFat HOST_MOCK-enabled object.
Throw out the original Arduino SD.h class and rewrite from scratch using
only the ESP8266 native SDFS calls. This makes "SD" based applications
compatible with normal ESP8266 "File" and "FS" and "SPIFFS" operations.
The only major visible change for users is that long filenames now are
fully supported and work without any code changes. If there are static
arrays of 11 bytes for old 8.3 names in code, they will need to be
adjusted.
While it is recommended to use the more powerful SDFS class to access SD
cards, this SD.h wrapper allows for use of existing Arduino libraries
which are built to only with with that SD class.
Additional helper functions added to ESP8266 native Filesystem:: classes
to help support this portability.
The rewrite is good enough to run the original SDWebServer and SD
example code without any changes.
* Add a FSConfig and SDFSConfig param to FS.begin()
Allows for configuration values to be passed into a filesystem via the
begin method. By default, a FS will receive a nullptr and should so
whatever is appropriate.
The base FSConfig class has one parameter, _autoFormat, set by the
default constructor to true.
For SPIFFS, you can now disable auto formatting on mount failure by
passing in a FSConfig(false) object.
For SDFS a SDFSConfig parameter can be passed into config specifying the
chip select and SPI configuration. If nothing is passed in, the begin
will fail since there are no safe default values here.
* Add FS::setConfig to set FS-specific options
Add a new call, FS::setConfig(const {SDFS,SPIFFS}Config *cfg), which
takes a FS-specific configuration object and copies any special settings
on a per-FS basis. The call is only valid on unmounted filesystems, and
checks the type of object passed in matches the FS being configured.
Updates the docs and tests to utilize this new configuration method.
* Add ::truncate to File interface
Fixes#3846
* Use polledTimeout for formatting yields, cleanup
Use the new polledTimeout class to ensure a yield every 5ms while
formatting.
Add in default case handling and some debug messages when invalid inputs
specified.
* Make setConfig take const& ref, cleaner code
setConfig now can take a parameter defined directly in the call by using
a const &ref to it, leading to one less line of code to write and
cleaner reading of the code.
Also clean up SDFS implementation pointer definition.
* uart fixes and BW improvements
* uart: read_char straightly use hw buffer
* +attributes for functions called by ISR
* uart: BW improvements
read_char straightly use hw buffer (+ ~10%bw)
read by block (+ ~190%bw) (instead of generic Stream::readBytes)
attributes for functions called by ISR
remove overrun message
remove some ISR flags which were not honoured
* fix merge
* fix buffer overflow
* serial stress test sketch
* astyle
* serial stress example: interactive keyboard, stop reading, overrun
* serial device test: bandwidth & overrun
* update + HardwareSerial::hasError()
* interactive overrun in example
* astyle
* Test using @plerup's SoftwareSerial as submodule (tag 3.4.1)
* update upstream ref (fix warning)
* host mock uart/read(buf,size)
* reset style changes in submodules before style diff
* update build_boards_manager_package.sh for submodules
* trigger CI (removing space)
* cannot reproduce locally the CI issue, setting bash -x option to get live trace
* remove previously added (in this PR) 'set -e' in package builder (passes local tests, not real CI)
script-comment new recipe.hooks.core.prebuild.3 (along with already commented .1 and .2)
moved CI package test to be first on the test list
remove 'set -x', wish me luck
* PolledTimeout Class for wrapping millis() loops
* Add yield policies, improve reset, add host tests
* Fix copyright, comments
* adjust host tests for better time precision
* add fuzzyness to timing tests for CI jitter
* add blink example with polledTimeout
* improve namespace and type naming, add copyright, comments
* fix astyle
* Function added to detect baudrate
* Added uart_start_detect_baudrate, detectBaudrate() wrappers for HardwareSerial and an example usage SerialDetectBaudrate.ino
* Some layout changes to pass Travis tests
* Some more nitty-gritty layout changes to pass Travis tests
* Some even more nitty-gritty layout changes to pass Travis tests
* renamed one function to testBaudrate() and updated doc/reference.rst
* Minor updates to doc/reference.rst
* New lines added
* interactive example: update with option for using DHCP again after using static IP
* lwip2: avoid crash when IP address is set to 0(any) by dhcp not getting its lease renewal in due time
* lwip2: automatically remove oldest PCBs in time-wait state, limit their number
thanks to @me-no-dev 07f4d4c241 (diff-f8258e71e25fb9985ca3799e3d8b88ecR399)
* faq: update about tcpCleanup()
* lwip2: add a macro HAS_PHY_CAPTURE=1 indicating capture facility is available
Enables I2S stereo input via DMA using new API calls:
. i2s_rxtx_begin(bool rx, rool tx);
. i2s_read_sample(uint32_t *l, uint32_t *r);
Original API calls will only enable TX, so this is backwards compatible.
Add simple I2S input example code using Arduino serial plotter.
Add UDP transmit of I2S microphone data to a PC (remote microphone).
Clean up and reorganize code to share RX and TX logic as much as
possible. Fix a potential WDT error while in blocking sample read
and write.
Provides a simple interface to attach/detach pins to the sigma-delta generator, and get/set the 2 parameters prescaler & target. Working example that fades the onboard LED is provided. Code and sample by @stefaandesmet2003.
Use platform.local.txt to add -Werror to GCC for the build of all
code. Any warnings on a submitted patch will cause an error.
Several examples and libraries had warnings/errors (missing returns
on functions, types, etc.). Clean those up with this commit as well.
