948a5c89e4
Added support for Arduino Esplora
2012-12-07 18:11:07 +01:00
1ca95a7bda
Updated firmware for atmega8 for new avr-gcc versions.
...
fixes #153
fixes #1122
2012-11-30 23:15:30 +01:00
ad93a18b85
Saved old Leonardo and Micro production firmware.
...
Rebuilt firmware for Micro.
Added pre-loaded Blink to new firmwares.
2012-11-30 16:34:04 +01:00
ef6f1eb11d
Improved Leonardo bootloader
...
The power-on reset detection didn't work properly, but has now been
fixed
2012-11-30 15:32:11 +01:00
554c211ec4
Leonardo pins_arduino.h fixes (jrcutler)
...
fixes #915
2012-11-30 15:14:16 +01:00
0e0715abd3
Clarifying comment.
2012-11-29 13:55:59 -05:00
e7a31301e5
Moving TXCO definition into HardwareSerial.cpp from HardwareSerial.h.
...
Otherwise, you get an error when compiling for processors with no serial port because the header file is always compiled.
See, for an example of the problem: https://github.com/damellis/attiny/issues/8
2012-11-29 13:48:01 -05:00
825d68a9c7
Issue #9 : Connection dies after a few seconds
...
Issue 1024: TCP connections die after few seconds of inactivity
2012-11-28 13:16:58 +01:00
dfb3cab853
Extended digital_pin_to_timer_PGM array in variants/leonardo/pins_arduino.h to include analog pins ( fixed #1129 )
2012-11-25 15:46:34 +01:00
d92a86f7b7
Caterina changes to support Micro. includes newly rebuilt version of the bootloader merged with Blink produced using 1.0.2
2012-11-23 16:09:32 -05:00
839b58c1ae
Updating Micro bootloader firmware.
2012-11-02 17:45:57 -04:00
036f0465e5
HardwareSerial: change byte to uint8_t (since byte definition isn't present).
2012-11-02 09:24:51 -04:00
f689991a59
Adding LilyPad Arduino USB.
2012-11-01 10:45:50 -04:00
ac1c8f921b
Adding Micro.
2012-10-27 14:12:26 -04:00
7e12aebbdb
Updating USB core to work at 8 MHz (different PLLCSR value).
2012-10-18 15:03:23 -04:00
23c2a9618c
Adding ATmega644P check to ATmega1284P check.
2012-10-09 13:53:09 -04:00
9dc3810f41
Merge branch 'master' of ../wifishield
2012-09-13 10:42:25 -04:00
a536108ee2
Moving into firmwares directory.
2012-09-13 10:41:16 -04:00
8ea885bdf0
Moving ATmegaXXU2 firmwares into subdirectory.
2012-09-13 10:39:59 -04:00
532a46a74b
Moving ATmega32U4 Timer 2 #undef's to Leonardo pins_arduino.h file.
2012-09-13 09:19:52 -04:00
47714c3d2c
Merge pull request #102 from sgk/leonardoTone
...
Fix for tone() on Leonardo.
2012-09-13 06:07:10 -07:00
6ab2a9f95e
Avoid serial buffer overrun on leonardo
2012-09-13 08:46:45 -04:00
a374e8b766
Changing setting of the UMSELn bits (for UART mode) and serial config values.
...
Before, the UMSELn1 bit was being to set to 1, putting the UART into a reserved mode. Now, we only set the high (0x80) bit to 1 for the ATmega8, which is needed to access UCSRnC (whose i/o address is shared with UBRRH).
Also, no longer bitwise-or the new config with the existing register value, because we're actually configuring all the settings in the register. (We're not using UCPOL, but it's supposed to be 0 in asynchronous mode.)
2012-08-30 08:47:35 -04:00
ae9b90603b
Renaming serial config constants to, e.g., SERIAL_8N1.
2012-08-30 08:21:12 -04:00
a72d05b2de
Merge pull request #109 from Alarus/master
...
Serial.begin() parameter to set data bits, parity, stop bits.
2012-08-30 05:08:28 -07:00
cd43ca3f7f
Fixing Serial.flush() breakage on Leonardo (WestFW).
...
http://code.google.com/p/arduino/issues/detail?id=1020
2012-08-30 07:44:25 -04:00
24c8bf8081
Fixing ATmega8 breakage from flush() change. (WestFW)
...
http://code.google.com/p/arduino/issues/detail?id=1019
2012-08-29 20:52:30 -04:00
222d51e383
Adding overloads so Serial.write(0) works.
...
http://code.google.com/p/arduino/issues/detail?id=1006
2012-08-29 16:32:05 -04:00
f9f1d3af3c
Serial.flush() waits for last character to be transmitted (michele.mazzucchi)
...
http://code.google.com/p/arduino/issues/detail?id=871
2012-08-28 08:02:54 -04:00
e223f8eb9c
Fix issue 866
...
Fix issue 866 by adding a const qualifier to what the F macro casts to.
2012-08-16 20:59:33 -07:00
76850b1a0a
Update hardware/arduino/cores/arduino/HardwareSerial.cpp
...
New Serial.begin(baud, config);
2012-08-14 19:55:13 +06:00
39bdce82cf
Update hardware/arduino/cores/arduino/HardwareSerial.h
...
New Serial.begin(baud, config);
2012-08-14 19:52:00 +06:00
295337d9ba
Update hardware/arduino/cores/arduino/HardwareSerial.cpp
...
New Serial.begin(baud, config);
2012-08-14 19:50:36 +06:00
655ca80b29
Update hardware/arduino/cores/arduino/HardwareSerial.cpp
...
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12 22:07:42 +06:00
5a420c034e
Update hardware/arduino/cores/arduino/HardwareSerial.cpp
...
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12 21:35:48 +06:00
c8490c9f7b
Update hardware/arduino/cores/arduino/HardwareSerial.cpp
...
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12 20:57:57 +06:00
0b44fb7f73
Update hardware/arduino/cores/arduino/HardwareSerial.h
...
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12 20:23:00 +06:00
5aa4dafe21
Update hardware/arduino/cores/arduino/HardwareSerial.h
...
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12 20:18:50 +06:00
44556206a8
Fix for tone() on Leonardo.
2012-08-08 18:27:40 +09:00
d83543cff1
Use "wiring" (not "stk500v2") avrdude protocol for uploads to Mega 2560.
...
It performs the auto-reset in avrdude. Otherwise, some uploads seem to fail (possibly because it takes too long to launch avrdude from the IDE, so there's too much of a delay between the auto-reset done by the IDE and the upload).
http://code.google.com/p/arduino/issues/detail?id=806
2012-07-15 09:12:08 -04:00
6036846ce3
Print "ovf" if float to be printed doesn't fit in a long.
...
http://code.google.com/p/arduino/issues/detail?id=967
2012-06-28 23:20:56 -04:00
71a615c65d
Print "inf" for infinite floating point numbers (using isinf()).
...
http://code.google.com/p/arduino/issues/detail?id=961
2012-06-23 10:37:35 -05:00
f833374312
Adding write(str) and write(buf, size) for USB CDC.
...
So that they work on the Leonardo.
http://code.google.com/p/arduino/issues/detail?id=958
2012-06-14 15:54:13 +01:00
308d907694
Printing NaN values as "nan" in printFloat().
...
http://code.google.com/p/arduino/issues/detail?id=946
2012-06-04 23:30:41 -04:00
b787982eec
Check for NULL pointer in Print.write().
...
Otherwise, trying to print(NULL) or write(NULL) could print a random
character.
http://code.google.com/p/arduino/issues/detail?id=941
2012-06-03 07:48:32 -04:00
dab4d8dee6
Added support for interrupt on INT2 and INT3 on the Leonardo
2012-06-02 20:08:46 +02:00
2cbde219c1
Merge remote-tracking branch 'upstream/master'
2012-05-21 09:31:54 -07:00
81edb9064a
Updating SoftwareSerial pin mapping (pin change interrupts) for Leonardo.
2012-05-20 15:56:49 -07:00
5c77b0ee3b
added pin change interrupt defines for Leonardo. fix for broken software serial on Leonardo
2012-05-19 22:05:46 -04:00
39eed5acc2
Adding readString() and readStringUntil() to Stream (Adrian McEwen).
...
This isn't necessarily a particularly efficient implementation (it
allocates memory one character at a time and so may lead to
fragmentation) but it seems to work.
http://code.google.com/p/arduino/issues/detail?id=454
2012-05-16 15:39:34 -04:00
