Cristian Maglie
3fc96366b1
Fixed projects setting to make it compile again inside Eclipse IDE
2011-08-16 19:57:39 +02:00
Cristian Maglie
42943b4de3
Added progressbar (from wiring)
2011-08-16 19:52:31 +02:00
Zach Eveland
e3848670a7
Temporary fix for auto-reset from IDE. Will reset chip when DTR is asserted, no matter what CDC baud rate is selected.
2011-08-16 13:43:55 -04:00
Zach Eveland
3f6df054ee
Serial via USB works
...
Integrated rest of Peter's USB implementation
2011-08-14 16:59:34 -04:00
Zach Eveland
81948ea4bf
added Peter's .inf (uses VID/PID 0x2341/0x0020)
2011-08-14 16:16:40 -04:00
Zach Eveland
e254d2989d
LEDs for D13, TX, and RX are more in line with Uno-like behavior during sketch uploading.
...
D13 flashes on reboot, TX and RX flash with USB data transfer.
2011-08-14 16:02:16 -04:00
Zach Eveland
c149be22f7
rebuilt Diskloader, added LED control macros for Leonardo, removed Microtouch defines
2011-08-14 15:11:23 -04:00
Zach Eveland
13a269df2e
increased bootloader delay to approx. 3.5 s
2011-08-14 14:29:44 -04:00
David A. Mellis
d338f22bde
Adding basic macros for analog + digital pin information.
...
http://code.google.com/p/arduino/issues/detail?id=495
2011-08-12 18:27:00 -04:00
David A. Mellis
f179794a45
Adding pin-change interrupt pin mapping macros to pins_arduino.h.
...
http://code.google.com/p/arduino/issues/detail?id=490
2011-08-12 17:31:22 -04:00
David A. Mellis
f14fd94d0e
Adding SCL, SDA, and LED #defines.
2011-08-12 16:59:24 -04:00
Zach Eveland
213091f487
cleaned up types. set D5 as not a PWM pin for now.
2011-08-11 14:16:13 -04:00
Zach Eveland
9b954df303
committed USB API, initial HardwareSerial-USBSerial integration
2011-08-11 14:08:38 -04:00
Zach Eveland
87898da8f6
updated avrdude.conf to support 32u4 on Windows, OS X and LInux
2011-08-11 11:20:00 -04:00
Zach Eveland
0ecdd723cf
diskloader source and binary for 32u4
2011-08-11 10:31:39 -04:00
Zach Eveland
cdf887b10b
support for 32u4 and Leonardo pins, uploading, and bootloader programming
2011-08-10 23:36:36 -04:00
David A. Mellis
fcbbf8f4b4
Merge remote branch 'ricklon/platforms' into platforms
2011-07-17 11:45:40 -04:00
amcewen
6b2dec0d01
Fixed bug where the DHCP client didn't correctly handle a response containing more than one DNS server address. Fixes issue 569.
2011-07-07 21:59:35 +01:00
David A. Mellis
c93fd746c4
Disabling terminal / monitor.
2011-06-29 22:48:07 -04:00
ricklon
a6646ca08c
fixed an issue, -Wl,--gc-sections needed to have a comma.
2011-06-29 20:21:35 -04:00
David A. Mellis
486e14aae3
Fixing linker command line argument.
2011-06-25 11:50:52 -04:00
David A. Mellis
7e1e9bfea2
Merge branch 'new-extension' into platforms
2011-06-25 11:40:12 -04:00
David A. Mellis
1cbc89fc20
Merge remote branch 'ricklon/platforms' into platforms
2011-06-25 09:23:58 -04:00
ricklon
dacfa86223
Addtional debuggin. Trying to find the pins compile issue.
2011-06-22 21:20:45 -06:00
ricklon
43a11be3c9
Cleaned up some of the code. Need to focus getting the 1.0 code compilation changes double checked.
2011-06-18 23:44:32 -04:00
ricklon
aa01546b55
Switched to a nonconflicting delimeter |. Compile process is working. Need to make sure that it matches 1.0 process exactly.
2011-06-17 22:12:21 -04:00
ricklon
67c9dfc667
A bit of cleanup. Delimeter not figured out yet.
2011-06-17 00:54:58 -04:00
ricklon
a57f35fb51
Fixed the missing line for messageformat args.
2011-06-16 23:17:08 -04:00
ricklon
72c4404c6d
Fixed compile process up to step 4. asyncExec cannot have null argmuments from the array.
2011-06-16 20:36:39 -04:00
amcewen
ffd2cec8a0
Tweak to defines to support a couple more AVRs - the ATmega32U4 and AT90USB1286, so it doesn't need to be patched for the Teensy boards.
2011-06-16 20:16:26 +01:00
David A. Mellis
1ab0f721ee
Fixing a couple of small bugs.
2011-06-16 14:14:25 +02:00
ricklon
b0556c2e74
Changed :: to , for platforms.txt. Also, changes to compile process to support execAsynchronously changed to Stringp[]
2011-06-15 23:04:38 -04:00
ricklon
f977f5f3c8
Updated preferences.txt to have a default platform=avr
2011-06-15 19:18:07 -04:00
WestfW
c56a1293d7
Oops. Add atmega8.lst/hex and atmega168.lst/hex to controlled files.
2011-06-14 23:57:41 -07:00
WestfW
7b1ee0f1b0
Allow the READ PARAMETER command to return our version number.
...
(significant size impact: 14 bytes!)
Initialized "address" to eliminate compiler warning (4 bytes!)
Add "atmega168" as a more accurate target name than "diecimila"
(keep diecimila as well for backward compatibility)
Reduce the .hex and .lst targets that are stored in source control
to the three basics: atmega8, atmega168, atmega328. The other
targets remain in the makefile and makeall, but will need to be
built from source if wanted. Which should be less of a problem
now that the source is buildable without installing crosspack.
2011-06-14 10:24:27 -07:00
WestfW
39a496616f
Modify Uno "lock" bits in boards.txt to make bootloader readable by
...
sketches. Part of http://code.google.com/p/arduino/issues/detail?id=554
2011-06-14 01:13:41 -07:00
ricklon
5e0ac9c720
Converting the step by step functions to integrate with standard Arduino execAsynchronously(array)
2011-06-13 22:14:28 -04:00
WestfW
e81c1123b6
http://code.google.com/p/arduino/issues/detail?id=368
...
Optiboot does not support ArduinoasISP programmer.
When avrdude runs and talks to an arduino running ArduinoISP,
it needs the optiboot (entered due to auto-reset) to abort and
start the ArduinoISP "application" when it sees communications
at the wrong serial speed. Unfortunately, optiboot treats all
unrecognized command characters as "no-ops" and responds/loops
for more commands, leading to a nice loop that never gets to
the sketch. This patch causes characters received with Framing
errors (the most likely error for speed mis-matches) to NOT
reset the watchdog timer (normally done in getch()), which will
cause the application to start if it continues for "a while."
(tested. Works! Running ArduinoISP at speeds as high as 57600
still causes the bootloader to start the sketch (although it fails
later on for other reasons.))
2011-06-13 19:07:07 -07:00
ricklon
7cf5b7263f
Fixed issues about invalid targets. Menu selection of boards and libraries are now functional.
2011-06-13 21:23:59 -04:00
ricklon
fa268259a0
Majority of non Compiler.java changes made.
2011-06-13 14:14:22 -04:00
amcewen
789e22add2
Added a way to specify the DNS server to use with static IP
2011-06-12 22:02:25 +01:00
amcewen
8dfee1fb74
Merge remote branch 'upstream/new-extension'
...
Moved my fork to the Arduino 1.0 codebase
2011-06-11 21:27:18 +01:00
WestfW
ece29c3805
(make sure .hex and .lst are updated as well.)
2011-06-11 03:17:38 -07:00
WestfW
422398e08c
Fix errors in LDSECTIONS refactoring
...
(found during atmega8 testing.)
2011-06-11 03:15:33 -07:00
WestfW
e28b716f88
Update version to reflect previous edit. Sigh.
2011-06-10 23:16:21 -07:00
WestfW
6f7687b0f9
Shrink code by using registers for variables "length" and "address"
...
http://code.google.com/p/optiboot/issues/detail?id=33
Fix high-value watchdog timeouts on ATmega8
http://code.google.com/p/optiboot/issues/detail?id=38
Change "start app on bad commands" code to start the app via the
watchdog timer, so that the app is always started with the chip
in fully reset state.
http://code.google.com/p/optiboot/issues/detail?id=37
2011-06-10 23:02:25 -07:00
WestfW
00706284de
Add a version number to the optiboot source and binary.
...
http://code.google.com/p/arduino/issues/detail?id=554
end of flash memory where they can be read (at least in theory) by
device programmers, hex-file examination, or application programs.
This is done by putting the version number in a separate section
(".version"), and using linker/objcopy magic to locate that section as
appropriate for the target chip. (See
http://lists.gnu.org/archive/html/avr-gcc-list/2011-02/msg00016.html
for some discussion on the details.)
Start the version at 4.1 (the last "packaged" version of optiboot was
called version 3, so the "top of source" would be 4.0, and adding the
version number makes 4.1)
Refactor LDSECTION in the Makefile to LDSECTIONS so that multiple
section start addresses can be defined.
Change the _isp makefile definitions to make the bootloader section
readable (but not writable) by the application section. (This would
need to be done elsewhere as well to handle all bootloader programming
techniques. Notably Arduino's boards.txt
Note that this change does not change the "code" portion of optiboot
at all. The only diffs in the .hex files are the added version word
at the end of flash memory.
2011-06-10 17:47:47 -07:00
WestfW
d4632cb095
Update shell script makeall
2011-06-10 16:29:34 -07:00
WestfW
e2812ef91c
This is a relatively significant edit that brings the Arduino copy of
...
optiboot up-to-date with the optiboot source repository as of Jun-2011
(the last changes made in the optiboot repository were in Oct-2010)
This adds support for several plaforms, fixes the "30k bug", and
refactors the source to have separate stk500.h, boot.h, and pin_defs.h
These are the arduino opticode issues fixed:
http://code.google.com/p/arduino/issues/detail?id=380
optiboot has problems upload sketches bigger than 30 KB
http://code.google.com/p/arduino/issues/detail?id=556
update optiboot to the point of the latest optiboot project sources.
These are issues that had been solved in the optiboot source aready:
http://code.google.com/p/arduino/issues/detail?id=364
optiboot leaves timer1 configured when starting app, breaks PWM on
pin 9 and 10. (fixed with a workaround in arduino core.)
aka http://code.google.com/p/optiboot/source/detail?r=c778fbe72df6ac13ef730c25283358c3c970f73e
Support for ATmega8 and mega88.
Fix fuse settings for mega168 _ISP targets
Additional new platforms (mega, sanguino)
http://code.google.com/p/optiboot/issues/detail?id=26
Set R1 to 0 (already in arduino code)
http://code.google.com/p/optiboot/issues/detail?id=36&can=1
Fails to build correctly for mega88
After this commit, the only differences between the Arduino optiboot.c
and the optiboot repository optiboot.c are cosmetic.
2011-06-10 16:17:13 -07:00
WestfW
6840b77643
http://code.google.com/p/arduino/issues/detail?id=517
...
Remove the trailing comments when setting fuse values for the various
*_isp targets, so that they won't cause avrdude errors.
This was done the same way as in the optiboot source tree:
http://code.google.com/p/optiboot/issues/detail?id=17
http://code.google.com/p/optiboot/source/detail?r=005fb033fc08c551b2f86f7c90c5db21549b3f20
2011-06-09 22:57:27 -07:00
