* Do not write more data than requested on PUYA flashes
* Always align flash reads/writes to 4 bytes
* fixup! Always align flash reads/writes to 4 bytes
This commit simplifies the code a bit and fixes a bug that caused wrong number of bytes to be
written
* fixup! Always align flash reads/writes to 4 bytes
* fixup! Always align flash reads/writes to 4 bytes
* Check for result before additional read/write
* Add overloads for unaligned reads/writes
* fixup! Add overloads for unaligned reads/writes
* fixup! Add overloads for unaligned reads/writes
* fixup! Add overloads for unaligned reads/writes
* fixup! Add overloads for unaligned reads/writes
* fixup! Add overloads for unaligned reads/writes
* fixup! Add overloads for unaligned reads/writes
* fixup! Add overloads for unaligned reads/writes
* Add tests for flashRead/flashWrite
* fixup! Add overloads for unaligned reads/writes
* fixup! Add tests for flashRead/flashWrite
* fixup! Add tests for flashRead/flashWrite
* fixup! Add overloads for unaligned reads/writes
* Allow test framework to use cores/esp8266/Arduino.h directly
* fix wps debugging
* some more missing debug.h
* Hunt down debug.h and roll-back
TODO: rename it to something else... it is an internal header
* Move abs+round checks to test/device/test_sw
* Restore macros for C code
* fixup! Move abs+round checks to test/device/test_sw
* Fix bad c/p, actually try round with ints
* tweak c macros per review
* fix gcc-10 missing cerrno include
- Add using namespace experimental::crypto; to HelloCrypto.ino.
- Add mention about new random function in libraries.rst.
- Update keywords.
Co-authored-by: Anders <andlo151@student.liu.se>
* - Add CryptoInterface library.
- Add TypeConversion core files.
* Fix compiler errors.
- Make HelloCrypto.ino stylish.
- Include assert.h in CryptoInterface.cpp.
* - Move base36 arrays to PROGMEM in TypeConversionFunctions.cpp.
- Add deprecated attribute to SHA1 and MD5 hashes.
- Remove _warningsEnabled since this has been replaced by the deprecated attribute.
- Prefix all getters with "get".
- Move all CryptoInterface functionality to the experimental namespace.
- Change formatting of core files.
- Improve comments.
* - Update keywords.txt.
* - Remove WiFi.disconnect() from setup() in HelloCrypto example since it no longer seems to be required.
* - Classify everything.
- Remove delay in setup() from HelloCrypto example since it does not seem to be required to prevent missing initial Serial prints.
- Mark type conversion functions as big endian.
- Update keywords.txt.
* - Remove namespace experimental.
- Create ESP.random functions in the core based on the defaultNonceGenerator code, and use these in defaultNonceGenerator.
- Rename CryptoInterface to esp8266::Crypto and move all functionality to the core.
- Remove need to #include <bearssl/bearssl.h> in the Crypto header file by changing br_hkdf_context to ::br_hkdf_context.
- Restyle code files for core usage.
* - Re-add namespace experimental.
- Improve comments.
* - Remove namespace esp8266.
- Rename namespace Crypto to namespace crypto.
Co-authored-by: Anders <andlo151@student.liu.se>
Co-authored-by: Develo <deveyes@gmail.com>
* Move the spi vendor list from Esp.h to its own header in eboot.
* Fix ifdef issue with spi_vendors.h
* Add initFlashQuirks() for any chip specific flash initialization.
Called from user_init().
* namespace experimental for initFlashQuirks()
* Slow down flash access during eboot firmware copy
Part 1 - still some work to do
* Slow down flash access during eboot firmware copy on XMC chips
Part 2 - Identify the chip type.
Note: there may still be issues with the access speed change.
This is very much experimental.
* Commit eboot.elf
Co-authored-by: Develo <deveyes@gmail.com>
Co-authored-by: Earle F. Philhower, III <earlephilhower@yahoo.com>
* At least the F_CPU define in host mock.h is needed by host Arduino.h - need to include Arduino.h further down in mock.h for this to work.
* Geting the include order right
* Prepare for runtime CPU clock rate selection
* Fix compile for not defined F_CPU
If defined F_CPU, make getCpuFreqMHz() a constexpr
* Use defines for register CPU2X instead of hex value
* Fix build for host - getCpuFreqMHz there was also in conflict with getCycleCount, using F_CPU:
tests/host/common/mock.h:#define F_CPU 80000000 (!)
* Asymmetrical includes and defines on host
* Support restart switch from 160MHz to 80MHz, e.g for OTA. Fixes#579
* Code size optimisation of ESP.getResetReason()
doing if/else snakes for something that is a switch/case
is wasteful, as it repeatedly evaluates the same if() condition.
Also repeating strcpy_P is adding code bloat.
This simplification reduces size from 111 to 41 bytes.
* add break statement also to default case
This function has excessively long datastrings that can
better be stored in flash, reducing runtime memory footprint.
Also detailed formatting only makes sense when there is an
exception or a watchdog. In other cases instead of printing
an unhelpful "flag: 0" we can just return the ResetReason, which
is much more readable.
Saves about 120 bytes of (data) memory.
* Add a CRC32 over progmem and ESP.checkFlashCRC
Automatically embed a CRC32 of the program memory (including bootloader
but excluding any filesystems) in all images in unused space in the
bootloader block.
Add a call, ESP.checkFlashCRC() which returns false if the calculated
CRC doesn't match the one stored in the image (i.e. flash corruption).
Fixes#4165
* Add example that corrupts itself, comments
Show CRC checking catch a 1-bit error in program code by corrupting a
large array, and then return it to clean and verify the CRC matches once
again.
Add comments to the CRC check routine
Clean up pylint complaints on crc32bin.py
* Check linker script for CRC space in bootsector
Add an assertion in the eboot linker file to guarantee that we have at
least 8 bytes of unused space at the end of the boot sector to patch in
the CRC. If not, the eboot link will fail.
* Add note about what to do if CRC check fails
Per discussion with @d-a-v.
When the CRC check fails, you could *try* to do certain things (but may
not succeed since there is known flash corruption at that point). List
a few ideas for application authors.
* Only single, flash/ram friendly crc32() function
* Combine the CRC calc and bin generation in 1 step
Per discussion w/@mcspr, combine the CRC calculation with the binary
generation, removing the additional build step.
* Add LittleFS as internal flash filesystem
Adds a LittleFS object which uses the ARMmbed littlefs embedded filesystem,
https://github.com/ARMmbed/littlefs, to enable a new filesystem for onboard
flash utilizing the exact same API as the existing SPIFFS filesystem.
LittleFS is built for low memory systems that are subject to random power
losses, is actively supported by the ARMmbed community, supports directories,
and seems to be much faster in the large-ish read-mostly applications I use.
LittleFS, however, has a larger minimum file allocation unit and does not do
static wear levelling. This means that for systems that need many little
files (<4K), have small SPIFFS areas (64K), or which have a large static
set of files covering the majority of flash coupled with a frequently
updated set of other files, it may not perform as well.
Simply replace SPIFFS.begin() with LittleFS.begin() in your sketch,
use LittleFS.open in place of SPIFFS.open to open files, and everything
else just works thanks to the magic of @igrr's File base class.
**LITTLEFS FLASH LAYOUT IS INCOMPATIBLE WITH SPIFFS**
Since it is a completely different filesystem, you will need to reformat
your flash (and lose any data therein) to use it. Tools to build the
flash filesystem and upload are at
https://github.com/earlephilhower/arduino-esp8266littlefs-plugin and
https://github.com/earlephilhower/mklittlefs/ . The mklittlefs tool
is installed as part of the Arduino platform installation, automatically.
The included example shows a contrived read-mostly example and
demonstrates how the same calls work on either SPIFFS.* or LittleFS.*
Host tests are also included as part of CI.
Directories are fully supported in LittleFS. This means that LittleFS
will have a slight difference vs. SPIFFS when you use
LittleFS.openDir()/Dir.next(). On SPIFFS dir.next()
will return all filesystem entries, including ones in "subdirs"
(because in SPIFFS there are no subdirs and "/" is the same as any
other character in a filename).
On LittleFS, dir.next() will only return entries in the directory
specified, not subdirs. So to list files in "/subdir/..." you need
to actually openDir("/subdir") and use Dir.next() to parse through
just those elements. The returned filenames also only have the
filename returned, not full paths. So on a FS with "/a/1", "/a/2"
when you do openDir("/a"); dir.next().getName(); you get "1" and "2"
and not "/a/1" and "/a/2" like in SPIFFS. This is consistent with
POSIX ideas about reading directories and more natural for a FS.
Most code will not be affected by this, but if you depend on
openDir/Dir.next() you need to be aware of it.
Corresponding ::mkdir, ::rmdir, ::isDirectory, ::isFile,
::openNextFile, and ::rewind methods added to Filesystem objects.
Documentation has been updated with this and other LittleFS information.
Subdirectories are made silently when they do not exist when you
try and create a file in a subdir. They are silently removed when
the last file in them is deleted. This is consistent with what
SPIFFS does but is obviously not normal POSIX behavior. Since there
has never been a "FS.mkdir()" method this is the only way to be
compatible with legacy SPIFFS code.
SPIFFS code has been refactored to pull out common flash_hal_* ops
and placed in its own namespace, like LittleFS.
* Fix up merge blank line issue
* Merge in the FSConfig changs from SDFS PR
Enable setConfig for LittleFS as well plys merge the SPIFFS changes
done in the SDFS PR.
* Fix merge errors
* Update to use v2-alpha branch
The V2-alpha branch supports small file optimizations which can help
increase the utilization of flash when small files are prevalent.
It also adds support for metadata, which means we can start adding
things like file creation times, if desired (not yet).
* V2 of littlefs is now in upstream/master
* Update test to support non-creation-ordered files
In a directory, the order in which "readNextFile()" will return a name
is undefined. SPIFFS may return it in order, but LittleFS does not as
of V2. Update the test to look for files by name when doing
readNextFile() testing.
* Fix LittleFS.truncate implementation
* Fix SDFS tests
SDFS, SPIFFS, and LittleFS now all share the same common set of tests,
greatly increasing the SDFS test coverage.
* Update to point to mklittlefs v2
Upgrade mklittlefs to V2 format support
* Remove extra FS::write(const char *s) method
This was removed in #5861 and erroneously re-introduced here.
* Minimize spurious differences from master
* Dramatically reduce memory usage
Reduce the program and read chunk sizes which impacts performance
minimally but reduces per-file RAM usage of 16KB to <1KB.
* Add @d-a-v's host emulation for LittleFS
* Fix SW Serial library version
* Fix free space reporting
Thanks to @TD-er for discovering the issue
* Update littlefs to latest upstream
* Remove sdfat version included by accident
* Update SDFAT to include MOCK changes required
* Update to include SD.h test of file append
All interrupt service routines are supposed to be in IRAM now, so there
is no need to keep interrupts disabled while doing flash operations.
Remove the IRQ disable/enable from the ESP.flash* methods.
Related to #5568
* [PUYA] Applied ESPeasy puya_v3.patch
Applied the patch to get the starting point as described in https://github.com/esp8266/Arduino/issues/5493
* [PUYA] Only allocate memory when PUYA detected
core 2.5.0 PUYA patch, no puya:
Description Function #calls call/sec min (ms) Avg (ms) max (ms)
Save File 4 0.25 34.755 45.264 67.620
Free Mem: 16168
core 2.5.0 PUYA patch, Faked Puya detect:
Description Function #calls call/sec min (ms) Avg (ms) max (ms)
Save File 2 0.04 41.332 57.544 73.756
Free Mem: 11560
* [PUYA] Check for PUYA chip as soon as possible at boot
Check for PUYA chip in call for `getFlashChipId()`
This will only be done once and the result of the get function is also cached.
* [PUYA] Use limited buffer (512 byte) allocated at first write
No need to allocate a buffer when not writing to flash.
The default buffer size is 512 bytes, which is 2 pages in the flash chip.
* [PUYA] Lower PUYA flash buffer to 1 page (256 B)
As discussed here: https://github.com/esp8266/Arduino/issues/5493#issuecomment-447543279
* [PUYA] Fix indents naming and return conditions
* [PUYA] Move Puya write code to spi_flash_write_puya
* [PUYA] Make spi_flash_write_puya static and define PUYA_SUPPORT
* [PUYA] Add some SPI flash vendor IDs
As requested by @igrr https://github.com/esp8266/Arduino/pull/5504#discussion_r242016184
* [PUYA] All suggested changes.
See: https://github.com/esp8266/Arduino/pull/5504#pullrequestreview-186145820
* WIP compile examples on host with 'make examples'
* WIP bufferize tcp input
* WIP Makefile
* WIP network to rework, tcp/udp to factorize, udp addresses broken
* minor changes to the core
* WIP basic udp working
* WIP mdns
* WIP mcast receiving, not sending
* WIP mdns OK
* beta version
* SSL + doc
* update travis host test command
* licenses
* typo
* doc: arduino builder is not around: declare functions before calling them
* fix with latest SSL PR, compile in 32 bits mode
* fix make clean
* make -m32 optional
* 32bits compiler ability tester
* WIP
* WIP (fix 1 vtable error, still another one to hunt with using spiffs)
* example astyle
* fix os_printf_plus
* load / save mock spiffs
* fix style
* fix using spiffs/mock
* don't mess ram
* update doc
* remove leftover
* optimization -Os except for CI, rename ARCH32 to FORCE32
* revert useless cast (not even compiled)
* remove unused function
* use proper type for pointer arithmetics
* makefile: sketch object and cpp file moved to bin/ directories
easier to clean, and IDE don't like them
* changes for review
* make use of %zd
* less verbose makefile by default (option)
* update readme
Allow the unused stack to be reset to the check value at any time in
the application, allowing for delta-stack calculations to be done.
Add ESP.resetFreeContStack() class method for general use.
Add in some dumping in the BearSSL_Validation example to show the
usage for those that care.
SDK uses final 4 sectors of flash for configuration data.
ESP.eraseConfig would only erase 2 sectors, so in some cases of
corrupted data ("system param error"), users could not fix the issue
using ESP.eraseConfig, and had to use esptool instead.
Thanks @HugoML for reporting this.
* Suppressed -Wunused-parameter and -Wunused-function by casting to void unused identifiers.
* Explicit initialization of all fields to suppress -Wmissing-field-initializers.
* Fixed signed/unsigned integer comparison.
* memset initialization of structs.
* More -Wunused-parameter fixes.
