* help in makefile
* fix some device tests, http_server is pending
* fix webserver test, one test is disabled due to general python2->3 failure
* remove debug strings
* minimize diff
* set reset method back to the default one on generic board
* fix vcc range check from datasheet
vcc is read as 2.9V here, datasheet says 2.5-3.6, old low limit was 3v
* tell python to decode string
* Fix Python3 errors for device tests
The Python3 migration didn't include fixes for local scripts in the
device test tree.
Fatal build and run Python errors fixed.
The last update to xunitmerge is ~5 years ago, so it looks to be
unsupported now.
Use a local copy of the two components to allow patching to work with
Python3.
The serial test seems to send garbage chars (non-ASCII/etc.), so use a
codepage 437 which supports all 255 chars.
Fixes: #6660
* Run tests at 160MHz (req'd for some SSL connections)
* Fix debuglevel options for builder
* Fix Python3 interpreter path in xunitmerge
* Remove virtualenv on "make clean"
* Add appropriate attribution, license to xunitmerge
Add like to the original sources with the author's license to the
copied/fixed xunitmerge files.
* Move all scripts and documentation to Python3
Python 2 EOL is Jan 1, 2020. Migrate scripts to run under Python 3.
Under Windows, we're already running Python 3.7, by dumb luck. The
oddness is that the Windows standalone executable for Python 3 is called
"python" whereas under UNIX-like OSes it's called "python3" with
"python" always referring to the Python 2 executable. The ZIP needs to
be updated to include a Python3.exe (copy of Python.exe) so that we can
use the same command lines under Linux and Windows, and to preserve my
sanity.
Fixes#6376
* Add new Windows ZIP with python3.exe file
* Sort options in boards.txt generation for repeatability
The order of the board opts dict changes depending on the Python version
and machine, so sort the options before printing them to get a stable
ordering.
* Re-add Python2 compatibility tweaks
Most scripts can run as Python 2 or Python 3 with minimal changes, so
re-add (and fix, as necessary) compatibility tweaks to the scripts.
* Fix device test environment variables
Device tests were not connecting properly to WiFi because the
environment variables were not set when WiFi.connect was called.
This would result in tests sometimes working *if* the prior sketch run
on the ESP saved WiFi connection information and auto-connect was
enabled. But, in most cases, the tests would simply never connect to
any WiFi and fail.
getenv() works only after BS_RUN is called (because BS_RUN handles the
actual parsing of environment variables sent from the host).
Add a "pretest" function to all tests which is called by the host test
controller only after all environment variables are set. Move all
WiFi/etc. operations that were in each separate test's setup() into it.
So the order of operations for tests now is:
ESP: setup()
-> Set serial baud
-> Call BS_RUN()
HOST: Send environment
Send "do pretest"
ESP: pretest()
-> Set Wifi using env. ariables, etc. return "true" on success
HOST: Send "run test 1"
ESP: Run 1st test, return result
HOST: Send "run test 2"
ESP: Run 2nd test, return result
<and so forth>
If nothing is needed to be set up, just return true from the pretest
function.
All tests now run and at least connect to WiFi. There still seem to be
some actual test errors, but not because of the WiFi/environment
variables anymore.
* Remove unneeded debug prints
* Silence esptool.py output when not in V=1 mode
Esptool-ck.exe had an option to be silent, but esptool.py doesn't so the
output is very chatty and makes looking a the run logs hard (60 lines
of esptool.py output, 3 lines of actual test reports).
Redirect esptool.py STDOUT to /dev/null unless V=1 to clear this up.
* Speed up builds massively by removing old JSON
arduino-builder checks the build.options.json file and then goes off and
pegs my CPU at 100% for over a minute on each test compile checking if
files have been modified.
Simply deleting any pre-existing options.json file causes this step to
be skipped and a quick, clean recompile is done in siginificantly less
time.
* Enable compile warnings, fix any that show up
Enable all GCC warnings when building the tests and fix any that came up
(mostly signed/unsigned, unused, and deprecated ones).
* Fix UMM_MALLOC printf crash, umm_test
Printf can now handle PROGMEM addresses, so simplify and correct the
debug printouts in umm_info and elsewhere.
__This is a breaking change, but the header and example did warn
everyone that this API was in flux due to the incompatible SD and SPIFFS
File implementations.__
BearSSL CertStores now simply need a filesystem and the names of the
data (generated on-chip) and archive (uploaded by user) files on it.
No more need to roll your own virtual CertStoreFile class.
Update the library, examples, and device test.
* Update to BearSSL 0.6+ release, add AES_CCM modes
Pull in latest BearSSL head (0.6 + minor additions) release and add AES_CCM
modes to the encryption options.
* Enable the aes_ccm initialization in client/server
* Initial attempt
* Working code with second stack thunking
* Remove #ifdefs in .S file, not needed.
* Clean up thunks and remove separate stack flag
* Fix PIO assembler errors
* Remove #ifdef code changes, ensure same code as PC
Remove "#ifdef ESP8266;...;#else;...;#endif" brackets in BearSSL to
ensure the host-tested code is the same as the ESP8266-run code.
* Move to latest BearSSL w/EC progmem savings
* Merge with master
* Add br_thunk_* calls to do ref counting, painting
Add reference counting br_thunk_add/del_ref() to replace stack handling code
in the class.
Add in stack painting and max usage calculation.
* Add in postmortem stack dump hooks
When a crash occurs while in the second stack, dump the BSSL stack and
then also the stack that it was called from (either cont or sys).
* Update stack dump to match decoder expectations
* Move thunk to code core for linkiage
The thunk code needs to be visible to the core routines, so move it to the
cores/esp8266 directory. Probably need to refactor the stack setup and the
bearssl portion to avoid dependency on bearssl libs in cores/esp8266
* Add 2nd stack dump utility routine
* Refactor once more, update stack size, add stress
Make stack_thunks generic, remove bearssl include inside of cores/esp8266.
Allocate the stack on a WiFiServerSecure object creation to avoid
fragmentation since we will need to allocate the stack to do any
connected work, anyway.
A stress test is now included which checks the total BearSSL second
stack usage for a variety of TLS handshake and certificate options
from badssl.org.
* Update to latest to-thunks branch
* Add BearSSL device test using stack stress
Run a series of SSL connection and transmission tests that stress
BearSSL and its stack usage to the device tests.
Modify device tests to include a possible SPIFFS generation and
upload when a make_spiffs.py file is present in a test directory.
* Use bearssl/master branch, not /to-thunks branch
Update to use the merged master branch of bearssl. Should have no code
changes.
boards generator updates:
* simplified mapping description: only flash and spiffs sizes are needed
* some ldscripts are renamed due to autogenerated names
* +2M/0, +2M/512K spiffs, +4M0
* reduce length of hidden strings in boards.txt (#5100, https://github.com/arduino/arduino-builder/issues/284)
* give more details in ldscripts (address, size, +rf-cal, +sdk-wifi-settings)
Previously device tests included information such as access point SSID/password at compile time. This made it difficult to compile test binaries once and then send them to multiple test runners for execution.
This change adds a command to the test library to set environment variable on the target device: “setenv key value”. C library setenv/getenv facility is used to store variables.
Test runner, tests, and makefile are updated to use this functionality.
