arduino/esp8266
1
0
Fork 0
mirror of https://github.com/esp8266/Arduino.git synced 2025-04-19 23:22:16 +03:00
Code

Merge pull request #1424 from KaloNK/master

Browse Source 
Allow setting alternate TX for UART 0, so GPIO1 is available as SPI_CS1
This commit is contained in:
Ivan Grokhotkov 2016-01-18 20:44:48 +03:00
commit f14ecdb960
2 changed files with 113 additions and 28 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

114
cores/esp8266/HardwareSerial.cpp
View File

@ -101,10 +101,12 @@ void uart_disarm_tx_interrupt(uart_t* uart);
void uart_set_baudrate(uart_t* uart, int baud_rate);
int uart_get_baudrate(uart_t* uart);
uart_t* uart_start_init(int uart_nr, int baudrate, byte config);
uart_t* uart_start_init(int uart_nr, int baudrate, byte config, uint8_t use_tx);
void uart_finish_init(uart_t* uart);
void uart_uninit(uart_t* uart);
void uart_swap(uart_t* uart);
void uart_swap(uart_t* uart, uint8_t use_tx);
void uart_set_tx(uart_t* uart, uint8_t use_tx);
void uart_set_pins(uart_t* uart, uint8_t tx, uint8_t rx);
void uart_ignore_char(char c);
void uart0_write_char(char c);
@ -274,7 +276,7 @@ int uart_get_baudrate(uart_t* uart) {
return uart->baud_rate;
}
uart_t* uart_start_init(int uart_nr, int baudrate, byte config, byte mode) {
uart_t* uart_start_init(int uart_nr, int baudrate, byte config, byte mode, uint8_t use_tx) {
uart_t* uart = (uart_t*) os_malloc(sizeof(uart_t));
@ -289,8 +291,15 @@ uart_t* uart_start_init(int uart_nr, int baudrate, byte config, byte mode) {
uart->rxEnabled = (mode != SERIAL_TX_ONLY);
uart->txEnabled = (mode != SERIAL_RX_ONLY);
uart->rxPin = (uart->rxEnabled)?3:255;
uart->txPin = (uart->txEnabled)?1:255;
if(uart->rxEnabled) pinMode(uart->rxPin, SPECIAL);
if(uart->rxEnabled) {
if (use_tx == 2) {
uart->txPin = 2;
pinMode(uart->rxPin, FUNCTION_4);
} else {
uart->txPin = 1;
pinMode(uart->rxPin, SPECIAL);
}
} else uart->txPin = 255;
if(uart->txEnabled) pinMode(uart->txPin, SPECIAL);
IOSWAP &= ~(1 << IOSWAPU0);
break;
@ -299,7 +308,7 @@ uart_t* uart_start_init(int uart_nr, int baudrate, byte config, byte mode) {
uart->rxEnabled = false;
uart->txEnabled = (mode != SERIAL_RX_ONLY);
uart->rxPin = 255;
uart->txPin = (uart->txEnabled)?2:255;
uart->txPin = (uart->txEnabled)?2:255; // GPIO7 as TX not possible! See GPIO pins used by UART
if(uart->txEnabled) pinMode(uart->txPin, SPECIAL);
break;
case UART_NO:
@ -360,46 +369,91 @@ void uart_uninit(uart_t* uart) {
os_free(uart);
}
void uart_swap(uart_t* uart) {
void uart_swap(uart_t* uart, uint8_t use_tx) {
if(uart == 0)
return;
switch(uart->uart_nr) {
case UART0:
if((uart->txPin == 1 && uart->txEnabled) || (uart->rxPin == 3 && uart->rxEnabled)) {
if(uart->txEnabled) pinMode(15, FUNCTION_4); //TX
if(uart->rxEnabled) pinMode(13, FUNCTION_4); //RX
IOSWAP |= (1 << IOSWAPU0);
if(((uart->txPin == 1 || uart->txPin == 2) && uart->txEnabled) || (uart->rxPin == 3 && uart->rxEnabled)) {
if(uart->txEnabled){ //TX
pinMode(1, INPUT);
pinMode(uart->txPin, INPUT);
uart->txPin = 15;
}
if(uart->rxEnabled){ //RX
pinMode(3, INPUT);
pinMode(uart->rxPin, INPUT);
uart->rxPin = 13;
}
if(uart->txEnabled) pinMode(uart->txPin, FUNCTION_4); //TX
if(uart->rxEnabled) pinMode(uart->rxPin, FUNCTION_4); //RX
IOSWAP |= (1 << IOSWAPU0);
} else {
if(uart->txEnabled) pinMode(1, SPECIAL); //TX
if(uart->rxEnabled) pinMode(3, SPECIAL); //RX
IOSWAP &= ~(1 << IOSWAPU0);
if(uart->txEnabled){ //TX
pinMode(15, INPUT);
uart->txPin = 1;
pinMode(uart->txPin, INPUT);
uart->txPin = (use_tx == 2)?2:1;
}
if(uart->rxEnabled){ //RX
pinMode(13, INPUT); //RX
pinMode(uart->rxPin, INPUT);
uart->rxPin = 3;
}
if(uart->txEnabled) pinMode(uart->txPin, (use_tx == 2)?FUNCTION_4:SPECIAL); //TX
if(uart->rxEnabled) pinMode(3, SPECIAL); //RX
IOSWAP &= ~(1 << IOSWAPU0);
}
break;
case UART1:
// Currently no swap possible! See GPIO pins used by UART
break;
default:
break;
}
}
void uart_set_tx(uart_t* uart, uint8_t use_tx) {
if(uart == 0)
return;
switch(uart->uart_nr) {
case UART0:
if(uart->txEnabled) {
if (uart->txPin == 1 && use_tx == 2) {
pinMode(uart->txPin, INPUT);
uart->txPin = 2;
pinMode(uart->txPin, FUNCTION_4);
} else if (uart->txPin == 2 && use_tx != 2) {
pinMode(uart->txPin, INPUT);
uart->txPin = 1;
pinMode(uart->txPin, SPECIAL);
}
}
break;
case UART1:
// current no swap possible! see GPIO pins used by UART
// GPIO7 as TX not possible! See GPIO pins used by UART
break;
default:
break;
}
}
void uart_set_pins(uart_t* uart, uint8_t tx, uint8_t rx) {
if(uart == 0)
return;
if(uart->uart_nr == UART0) { // Only UART0 allows pin changes
if(uart->txEnabled && uart->txPin != tx) {
if( rx == 13 && tx == 15) {
uart_swap(uart, 15);
} else if (rx == 3 && (tx == 1 || tx == 2)) {
if (uart->rxPin != rx) uart_swap(uart, tx);
else uart_set_tx(uart, tx);
}
}
if(uart->rxEnabled && uart->rxPin != rx && rx == 13 && tx == 15) {
uart_swap(uart, 15);
}
}
}
// ####################################################################################################
// ####################################################################################################
// ####################################################################################################
@ -488,7 +542,7 @@ HardwareSerial::HardwareSerial(int uart_nr) :
_uart_nr(uart_nr), _uart(0), _tx_buffer(0), _rx_buffer(0) {
}
void HardwareSerial::begin(unsigned long baud, byte config, byte mode) {
void HardwareSerial::begin(unsigned long baud, byte config, byte mode, uint8_t use_tx) {
InterruptLock il;
// disable debug for this interface
@ -499,7 +553,7 @@ void HardwareSerial::begin(unsigned long baud, byte config, byte mode) {
if (_uart) {
os_free(_uart);
}
_uart = uart_start_init(_uart_nr, baud, config, mode);
_uart = uart_start_init(_uart_nr, baud, config, mode, use_tx);
if(_uart == 0) {
return;
@ -538,10 +592,22 @@ void HardwareSerial::end() {
_tx_buffer = 0;
}
void HardwareSerial::swap() {
void HardwareSerial::swap(uint8_t use_tx) {
if(_uart == 0)
return;
uart_swap(_uart);
uart_swap(_uart, use_tx);
}
void HardwareSerial::set_tx(uint8_t use_tx) {
if(_uart == 0)
return;
uart_set_tx(_uart, use_tx);
}
void HardwareSerial::pins(uint8_t tx, uint8_t rx) {
if(_uart == 0)
return;
uart_set_pins(_uart, tx, rx);
}
void HardwareSerial::setDebugOutput(bool en) {

27
cores/esp8266/HardwareSerial.h
View File

@ -74,14 +74,33 @@ class HardwareSerial: public Stream {
HardwareSerial(int uart_nr);
void begin(unsigned long baud) {
begin(baud, SERIAL_8N1, SERIAL_FULL);
begin(baud, SERIAL_8N1, SERIAL_FULL, 1);
}
void begin(unsigned long baud, uint8_t config) {
begin(baud, config, SERIAL_FULL);
begin(baud, config, SERIAL_FULL, 1);
}
void begin(unsigned long, uint8_t, uint8_t);
void begin(unsigned long baud, uint8_t config, uint8_t mode) {
begin(baud, config, mode, 1);
}
void begin(unsigned long, uint8_t, uint8_t, uint8_t);
void end();
void swap(); //toggle between use of GPIO13/GPIO15 or GPIO3/GPIO1 as RX and TX
void swap() {
swap(1);
}
void swap(uint8_t use_tx); //toggle between use of GPIO13/GPIO15 or GPIO3/GPIO(1/2) as RX and TX
/*
* Toggle between use of GPIO1 and GPIO2 as TX on UART 0.
* Note: UART 1 can't be used if GPIO2 is used with UART 0!
*/
void set_tx(uint8_t use_tx);
/*
* UART 0 possible options are (1, 3), (2, 3) or (15, 13)
* UART 1 allows only TX on 2 if UART 0 is not (2, 3)
*/
void pins(uint8_t tx, uint8_t rx);
int available(void) override;
int peek(void) override;
int read(void) override;