Changed Leonardo only examples to "USB", added

build/shared/examples/09.USB/Keyboard/KeyboardReprogram/KeyboardReprogram.ino

@@ -0,0 +1,95 @@
+/*
+  Arduino Programs Blink
+ 
+ This sketch demonstrates the Keyboard library.
+ 
+ When you connect pin 2 to ground, it creates a new
+ window with a key combination (CTRL-N),
+ then types in the Blink sketch, then auto-formats the text
+ using another key combination (CTRL-T), then 
+ uploads the sketch to the currently selected Arduino using 
+ a final key combination (CTRL-U).
+ 
+ Circuit:
+ * Arduino Leonardo or Micro
+ * wire to connect D2 to ground.
+ 
+ created 5 Mar 2012
+ modified 29 Mar 2012
+ by Tom Igoe
+ 
+ This example is in the public domain
+ 
+ http://www.arduino.cc/en/Tutorial/KeyboardReprogram
+ */
+
+// use this option for OSX. 
+// Comment it out if using Windows or Linux:
+char ctrlKey = KEY_LEFT_GUI;
+// use this option for Windows and Linux.
+// leave commented out if using OSX:
+//  char ctrlKey = KEY_LEFT_CTRL;    
+
+
+void setup() {
+  // make pin 2 an input and turn on the 
+  // pullup resistor so it goes high unless
+  // connected to ground:
+  pinMode(2, INPUT_PULLUP);
+  // initialize control over the keyboard:
+  Keyboard.begin();
+}
+
+void loop() {
+  while (digitalRead(2) == HIGH) {
+    // do nothing until pin 2 goes low
+    delay(500);
+  }
+  delay(1000);
+  // new document:
+  Keyboard.press(ctrlKey);
+  Keyboard.press('n');
+  delay(100);
+  Keyboard.releaseAll();
+  // wait for new window to open:
+  delay(1000);
+
+  // Type out "blink":
+  Keyboard.println("void setup() {");
+  Keyboard.println("pinMode(13, OUTPUT);");
+  Keyboard.println("}");
+  Keyboard.println();
+  Keyboard.println("void loop() {");
+  Keyboard.println("digitalWrite(13, HIGH);");
+  Keyboard.print("delay(3000);");
+  // 3000 ms is too long. Delete it:
+  for (int keystrokes=0; keystrokes < 6; keystrokes++) {
+    delay(500);
+    Keyboard.write(KEY_BACKSPACE); 
+  }
+  // make it 1000 instead:
+  Keyboard.println("1000);");
+  Keyboard.println("digitalWrite(13, LOW);");
+  Keyboard.println("delay(1000);");
+  Keyboard.println("}");
+  // tidy up:
+  Keyboard.press(ctrlKey);
+  Keyboard.press('t');
+  delay(100);
+  Keyboard.releaseAll();
+  delay(3000);
+  // upload code:
+  Keyboard.press(ctrlKey);
+  Keyboard.press('u');
+  delay(100);
+  Keyboard.releaseAll();
+
+  // wait for the sweet oblivion of reprogramming:
+  while(true);
+}
+
+
+
+
+
+