Run new astyle formatter against all the examples

libraries/WiFi/examples/WiFiWebServer/WiFiWebServer.ino

@@ -1,16 +1,16 @@
 /*
   WiFi Web Server
- 
+
  A simple web server that shows the value of the analog input pins.
  using a WiFi shield.
- 
- This example is written for a network using WPA encryption. For 
+
+ This example is written for a network using WPA encryption. For
  WEP or WPA, change the Wifi.begin() call accordingly.
- 
+
  Circuit:
  * WiFi shield attached
  * Analog inputs attached to pins A0 through A5 (optional)
- 
+
  created 13 July 2010
  by dlf (Metodo2 srl)
  modified 31 May 2012
@@ -22,7 +22,7 @@
 #include <WiFi.h>
 
 
-char ssid[] = "yourNetwork";      // your network SSID (name) 
+char ssid[] = "yourNetwork";      // your network SSID (name)
 char pass[] = "secretPassword";   // your network password
 int keyIndex = 0;                 // your network key Index number (needed only for WEP)
 
@@ -32,32 +32,32 @@ WiFiServer server(80);
 
 void setup() {
   //Initialize serial and wait for port to open:
-  Serial.begin(9600); 
+  Serial.begin(9600);
   while (!Serial) {
     ; // wait for serial port to connect. Needed for Leonardo only
   }
-  
+
   // check for the presence of the shield:
   if (WiFi.status() == WL_NO_SHIELD) {
-    Serial.println("WiFi shield not present"); 
+    Serial.println("WiFi shield not present");
     // don't continue:
-    while(true);
-  } 
+    while (true);
+  }
 
   String fv = WiFi.firmwareVersion();
-  if( fv != "1.1.0" )
+  if ( fv != "1.1.0" )
     Serial.println("Please upgrade the firmware");
-  
+
   // attempt to connect to Wifi network:
-  while ( status != WL_CONNECTED) { 
+  while ( status != WL_CONNECTED) {
     Serial.print("Attempting to connect to SSID: ");
     Serial.println(ssid);
-    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:    
+    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:
     status = WiFi.begin(ssid, pass);
 
     // wait 10 seconds for connection:
     delay(10000);
-  } 
+  }
   server.begin();
   // you're connected now, so print out the status:
   printWifiStatus();
@@ -94,15 +94,15 @@ void loop() {
             client.print(analogChannel);
             client.print(" is ");
             client.print(sensorReading);
-            client.println("<br />");       
+            client.println("<br />");
           }
           client.println("</html>");
-           break;
+          break;
         }
         if (c == '\n') {
           // you're starting a new line
           currentLineIsBlank = true;
-        } 
+        }
         else if (c != '\r') {
           // you've gotten a character on the current line
           currentLineIsBlank = false;
@@ -111,7 +111,7 @@ void loop() {
     }
     // give the web browser time to receive the data
     delay(1);
-    
+
     // close the connection:
     client.stop();
     Serial.println("client disonnected");