Run new astyle formatter against all the examples

libraries/WiFi/examples/WiFiWebClientRepeating/WiFiWebClientRepeating.ino

@@ -1,16 +1,16 @@
 /*
   Repeating Wifi Web client
- 
+
  This sketch connects to a a web server and makes a request
  using an Arduino Wifi shield.
- 
+
  Circuit:
  * Wifi shield attached to pins 10, 11, 12, 13
- 
+
  created 23 April 2012
  modifide 31 May 2012
  by Tom Igoe
- 
+
  http://arduino.cc/en/Tutorial/WifiWebClientRepeating
  This code is in the public domain.
  */
@@ -18,7 +18,7 @@
 #include <SPI.h>
 #include <WiFi.h>
 
-char ssid[] = "yourNetwork";      //  your network SSID (name) 
+char ssid[] = "yourNetwork";      //  your network SSID (name)
 char pass[] = "secretPassword";   // your network password
 int keyIndex = 0;            // your network key Index number (needed only for WEP)
 
@@ -33,36 +33,36 @@ char server[] = "www.arduino.cc";
 
 unsigned long lastConnectionTime = 0;           // last time you connected to the server, in milliseconds
 boolean lastConnected = false;                  // state of the connection last time through the main loop
-const unsigned long postingInterval = 10*1000;  // delay between updates, in milliseconds
+const unsigned long postingInterval = 10 * 1000; // delay between updates, in milliseconds
 
 void setup() {
   //Initialize serial and wait for port to open:
-  Serial.begin(9600); 
+  Serial.begin(9600);
   while (!Serial) {
     ; // wait for serial port to connect. Needed for Leonardo only
   }
-  
+
   // check for the presence of the shield:
   if (WiFi.status() == WL_NO_SHIELD) {
-    Serial.println("WiFi shield not present"); 
+    Serial.println("WiFi shield not present");
     // don't continue:
-    while(true);
-  } 
+    while (true);
+  }
 
   String fv = WiFi.firmwareVersion();
-  if( fv != "1.1.0" )
+  if ( fv != "1.1.0" )
     Serial.println("Please upgrade the firmware");
-  
+
   // attempt to connect to Wifi network:
-  while ( status != WL_CONNECTED) { 
+  while ( status != WL_CONNECTED) {
     Serial.print("Attempting to connect to SSID: ");
     Serial.println(ssid);
-    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:    
+    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:
     status = WiFi.begin(ssid, pass);
 
     // wait 10 seconds for connection:
     delay(10000);
-  } 
+  }
   // you're connected now, so print out the status:
   printWifiStatus();
 }
@@ -86,7 +86,7 @@ void loop() {
 
   // if you're not connected, and ten seconds have passed since
   // your last connection, then connect again and send data:
-  if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) {
+  if (!client.connected() && (millis() - lastConnectionTime > postingInterval)) {
     httpRequest();
   }
   // store the state of the connection for next time through
@@ -108,7 +108,7 @@ void httpRequest() {
 
     // note the time that the connection was made:
     lastConnectionTime = millis();
-  } 
+  }
   else {
     // if you couldn't make a connection:
     Serial.println("connection failed");