arduino/esp8266
1
0
Fork 0
mirror of https://github.com/esp8266/Arduino.git synced 2025-07-30 16:24:09 +03:00
Code Activity

Run new astyle formatter against all the examples

Browse Source
This commit is contained in:
Federico Fissore
2013-10-21 09:58:40 +02:00
parent 3c6ee46828
commit b4c68b3dff
259 changed files with 5160 additions and 5217 deletions
Download Patch File Download Diff File Expand all files Collapse all files

42
libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino
View File

@ -1,52 +1,52 @@
/*
Software serial multple serial test
Receives from the two software serial ports,
sends to the hardware serial port.
In order to listen on a software port, you call port.listen().
Receives from the two software serial ports,
sends to the hardware serial port.
In order to listen on a software port, you call port.listen().
When using two software serial ports, you have to switch ports
by listen()ing on each one in turn. Pick a logical time to switch
ports, like the end of an expected transmission, or when the
ports, like the end of an expected transmission, or when the
buffer is empty. This example switches ports when there is nothing
more to read from a port
The circuit:
The circuit:
Two devices which communicate serially are needed.
* First serial device's TX attached to digital pin 2, RX to pin 3
* Second serial device's TX attached to digital pin 4, RX to pin 5
Note:
Not all pins on the Mega and Mega 2560 support change interrupts,
so only the following can be used for RX:
Not all pins on the Mega and Mega 2560 support change interrupts,
so only the following can be used for RX:
10, 11, 12, 13, 50, 51, 52, 53, 62, 63, 64, 65, 66, 67, 68, 69
Not all pins on the Leonardo support change interrupts,
so only the following can be used for RX:
Not all pins on the Leonardo support change interrupts,
so only the following can be used for RX:
8, 9, 10, 11, 14 (MISO), 15 (SCK), 16 (MOSI).
created 18 Apr. 2011
modified 25 May 2012
by Tom Igoe
based on Mikal Hart's twoPortRXExample
This example code is in the public domain.
*/
#include <SoftwareSerial.h>
// software serial #1: TX = digital pin 10, RX = digital pin 11
SoftwareSerial portOne(10,11);
SoftwareSerial portOne(10, 11);
// software serial #2: TX = digital pin 8, RX = digital pin 9
// on the Mega, use other pins instead, since 8 and 9 don't work on the Mega
SoftwareSerial portTwo(8,9);
SoftwareSerial portTwo(8, 9);
void setup()
{
// Open serial communications and wait for port to open:
// Open serial communications and wait for port to open:
Serial.begin(9600);
while (!Serial) {
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo only
}