Run new astyle formatter against all the examples

libraries/GSM/examples/Tools/TestGPRS/TestGPRS.ino

@@ -1,20 +1,20 @@
 /*
- 
+
  This sketch test the GSM shield's ability to connect to a
- GPERS network. It asks for APN information through the 
+ GPERS network. It asks for APN information through the
  serial monitor and tries to connect to arduino.cc.
- 
+
  Circuit:
  * GSM shield attached
  * SIM card with data plan
- 
+
  Created 18 Jun 2012
  by David del Peral
- 
+
  This example code is part of the public domain
- 
+
  http://arduino.cc/en/Tutorial/GSMToolsTestGPRS
- 
+
  */
 
 // libraries
@@ -55,53 +55,53 @@ void setup()
 void loop()
 {
   use_proxy = false;
-  
+
   // start GSM shield
   // if your SIM has PIN, pass it as a parameter of begin() in quotes
   Serial.print("Connecting GSM network...");
-  if(gsmAccess.begin(PINNUMBER)!=GSM_READY)
+  if (gsmAccess.begin(PINNUMBER) != GSM_READY)
   {
     Serial.println(errortext);
-    while(true);
+    while (true);
   }
   Serial.println(oktext);
-  
+
   // read APN introduced by user
   char apn[50];
   Serial.print("Enter your APN: ");
   readSerial(apn);
   Serial.println(apn);
-  
+
   // Read APN login introduced by user
   char login[50];
   Serial.print("Now, enter your login: ");
   readSerial(login);
   Serial.println(login);
-  
+
   // read APN password introduced by user
   char password[20];
   Serial.print("Finally, enter your password: ");
   readSerial(password);
-  
+
   // attach GPRS
   Serial.println("Attaching to GPRS with your APN...");
-  if(gprsAccess.attachGPRS(apn, login, password)!=GPRS_READY)
+  if (gprsAccess.attachGPRS(apn, login, password) != GPRS_READY)
   {
     Serial.println(errortext);
   }
-  else{
-      
+  else {
+
     Serial.println(oktext);
-    
+
     // read proxy introduced by user
     char proxy[100];
     Serial.print("If your carrier uses a proxy, enter it, if not press enter: ");
     readSerial(proxy);
     Serial.println(proxy);
-    
+
     // if user introduced a proxy, asks him for proxy port
     int pport;
-    if(proxy[0] != '\0'){
+    if (proxy[0] != '\0') {
       // read proxy port introduced by user
       char proxyport[10];
       Serial.print("Enter the proxy port: ");
@@ -111,61 +111,61 @@ void loop()
       use_proxy = true;
       Serial.println(proxyport);
     }
-    
+
     // connection with arduino.cc and realize HTTP request
     Serial.print("Connecting and sending GET request to arduino.cc...");
     int res_connect;
-    
+
     // if use a proxy, connect with it
-    if(use_proxy)
+    if (use_proxy)
       res_connect = client.connect(proxy, pport);
     else
       res_connect = client.connect(url, 80);
-    
+
     if (res_connect)
     {
       // make a HTTP 1.0 GET request (client sends the request)
       client.print("GET ");
-      
+
       // if use a proxy, the path is arduino.cc URL
-      if(use_proxy)
+      if (use_proxy)
         client.print(urlproxy);
       else
         client.print(path);
-        
+
       client.println(" HTTP/1.0");
       client.println();
       Serial.println(oktext);
-    } 
+    }
     else
     {
       // if you didn't get a connection to the server
       Serial.println(errortext);
     }
     Serial.print("Receiving response...");
-    
+
     boolean test = true;
-    while(test)
+    while (test)
     {
-      // if there are incoming bytes available 
+      // if there are incoming bytes available
       // from the server, read and check them
       if (client.available())
       {
         char c = client.read();
         response += c;
-        
+
         // cast response obtained from string to char array
-        char responsechar[response.length()+1];
-        response.toCharArray(responsechar, response.length()+1);
-        
+        char responsechar[response.length() + 1];
+        response.toCharArray(responsechar, response.length() + 1);
+
         // if response includes a "200 OK" substring
-        if(strstr(responsechar, "200 OK") != NULL){
+        if (strstr(responsechar, "200 OK") != NULL) {
           Serial.println(oktext);
           Serial.println("TEST COMPLETE!");
           test = false;
         }
       }
-      
+
       // if the server's disconnected, stop the client:
       if (!client.connected())
       {
@@ -184,7 +184,7 @@ void loop()
 int readSerial(char result[])
 {
   int i = 0;
-  while(1)
+  while (1)
   {
     while (Serial.available() > 0)
     {
@@ -194,7 +194,7 @@ int readSerial(char result[])
         result[i] = '\0';
         return 0;
       }
-      if(inChar!='\r')
+      if (inChar != '\r')
       {
         result[i] = inChar;
         i++;