arduino/esp8266
1
0
Fork 0
mirror of https://github.com/esp8266/Arduino.git synced 2025-07-30 16:24:09 +03:00
Code Activity

Run new astyle formatter against all the examples

Browse Source
This commit is contained in:
Federico Fissore
2013-10-21 09:58:40 +02:00
parent 3c6ee46828
commit b4c68b3dff
259 changed files with 5160 additions and 5217 deletions
Download Patch File Download Diff File Expand all files Collapse all files

58
libraries/GSM/examples/GSMPachubeClient/GSMPachubeClient.ino
View File

@ -1,26 +1,26 @@
/*
GSM Pachube client
This sketch connects an analog sensor to Pachube (http://www.pachube.com)
using a Telefonica GSM/GPRS shield.
This example has been updated to use version 2.0 of the Pachube.com API.
This example has been updated to use version 2.0 of the Pachube.com API.
To make it work, create a feed with a datastream, and give it the ID
sensor1. Or change the code below to match your feed.
Circuit:
* Analog sensor attached to analog in 0
* GSM shield attached to an Arduino
* SIM card with a data plan
created 4 March 2012
by Tom Igoe
and adapted for GSM shield by David Del Peral
This code is in the public domain.
http://arduino.cc/en/Tutorial/GSMExamplesPachubeClient
*/
// libraries
@ -51,7 +51,7 @@ char server[] = "api.pachube.com"; // name address for pachube API
unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds
boolean lastConnected = false; // state of the connection last time through the main loop
const unsigned long postingInterval = 10*1000; //delay between updates to Pachube.com
const unsigned long postingInterval = 10 * 1000; //delay between updates to Pachube.com
void setup()
{
@ -60,16 +60,16 @@ void setup()
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo only
}
// connection state
boolean notConnected = true;
// After starting the modem with GSM.begin()
// attach the shield to the GPRS network with the APN, login and password
while(notConnected)
while (notConnected)
{
if((gsmAccess.begin(PINNUMBER)==GSM_READY) &
(gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY))
if ((gsmAccess.begin(PINNUMBER) == GSM_READY) &
(gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD) == GPRS_READY))
notConnected = false;
else
{
@ -80,17 +80,17 @@ void setup()
}
void loop()
{
{
// read the analog sensor:
int sensorReading = analogRead(A0);
int sensorReading = analogRead(A0);
// if there's incoming data from the net connection.
// send it out the serial port. This is for debugging
// purposes only:
if (client.available())
{
char c = client.read();
Serial.print(c);
char c = client.read();
Serial.print(c);
}
// if there's no net connection, but there was one last time
@ -99,14 +99,14 @@ void loop()
{
client.stop();
}
// if you're not connected, and ten seconds have passed since
// your last connection, then connect again and send data:
if(!client.connected() && ((millis() - lastConnectionTime) > postingInterval))
if (!client.connected() && ((millis() - lastConnectionTime) > postingInterval))
{
sendData(sensorReading);
sendData(sensorReading);
}
// store the state of the connection for next time through
// the loop:
lastConnected = client.connected();
@ -121,7 +121,7 @@ void sendData(int thisData)
if (client.connect(server, 80))
{
Serial.println("connecting...");
// send the HTTP PUT request:
client.print("PUT /v2/feeds/");
client.print(FEEDID);
@ -142,11 +142,11 @@ void sendData(int thisData)
client.println("Content-Type: text/csv");
client.println("Connection: close");
client.println();
// here's the actual content of the PUT request:
client.print("sensor1,");
client.println(thisData);
}
}
else
{
// if you couldn't make a connection:
@ -169,17 +169,17 @@ int getLength(int someValue)
{
// there's at least one byte:
int digits = 1;
// continually divide the value by ten,
// continually divide the value by ten,
// adding one to the digit count for each
// time you divide, until you're at 0:
int dividend = someValue /10;
int dividend = someValue / 10;
while (dividend > 0)
{
dividend = dividend /10;
dividend = dividend / 10;
digits++;
}
// return the number of digits:
return digits;
}

46
libraries/GSM/examples/GSMPachubeClientString/GSMPachubeClientString.ino
View File

@ -1,27 +1,27 @@
/*
Pachube client with Strings
This sketch connects two analog sensors to Pachube (http://www.pachube.com)
through a Telefonica GSM/GPRS shield.
This example has been updated to use version 2.0 of the Pachube.com API.
This example has been updated to use version 2.0 of the Pachube.com API.
To make it work, create a feed with two datastreams, and give them the IDs
sensor1 and sensor2. Or change the code below to match your feed.
This example uses the String library, which is part of the Arduino core from
version 0019.
version 0019.
Circuit:
* Analog sensors attached to A0 and A1
* GSM shield attached to an Arduino
* SIM card with a data plan
created 8 March 2012
by Tom Igoe
and adapted for GSM shield by David Del Peral
This code is in the public domain.
*/
// Include the GSM library
@ -52,7 +52,7 @@ char server[] = "api.pachube.com"; // name address for Pachube API
unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds
boolean lastConnected = false; // state of the connection last time through the main loop
const unsigned long postingInterval = 10*1000; // delay between updates to Pachube.com
const unsigned long postingInterval = 10 * 1000; // delay between updates to Pachube.com
void setup()
{
@ -61,16 +61,16 @@ void setup()
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo only
}
// connection state
boolean notConnected = true;
// After starting the modem with GSM.begin()
// attach the shield to the GPRS network with the APN, login and password
while(notConnected)
// attach the shield to the GPRS network with the APN, login and password
while (notConnected)
{
if((gsmAccess.begin(PINNUMBER)==GSM_READY) &
(gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY))
if ((gsmAccess.begin(PINNUMBER) == GSM_READY) &
(gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD) == GPRS_READY))
notConnected = false;
else
{
@ -85,13 +85,13 @@ void setup()
void loop()
{
// read the sensor on A0
int sensorReading = analogRead(A0);
int sensorReading = analogRead(A0);
// convert the data to a String
String dataString = "sensor1,";
dataString += sensorReading;
// you can append multiple readings to this String to
// you can append multiple readings to this String to
// send the pachube feed multiple values
int otherSensorReading = analogRead(A1);
dataString += "\nsensor2,";
@ -117,7 +117,7 @@ void loop()
// if you're not connected, and ten seconds have passed since
// your last connection, then connect again and send data
if(!client.connected() && (millis() - lastConnectionTime > postingInterval))
if (!client.connected() && (millis() - lastConnectionTime > postingInterval))
{
sendData(dataString);
}
@ -133,7 +133,7 @@ void sendData(String thisData)
if (client.connect(server, 80))
{
Serial.println("connecting...");
// send the HTTP PUT request:
client.print("PUT /v2/feeds/");
client.print(FEEDID);
@ -150,10 +150,10 @@ void sendData(String thisData)
client.println("Content-Type: text/csv");
client.println("Connection: close");
client.println();
// here's the actual content of the PUT request
client.println(thisData);
}
}
else
{
// if you couldn't make a connection

26
libraries/GSM/examples/GsmWebClient/GsmWebClient.ino
View File

@ -1,19 +1,19 @@
/*
Web client
This sketch connects to a website through a GSM shield. Specifically,
this example downloads the URL "http://arduino.cc/asciilogo.txt" and
this example downloads the URL "http://arduino.cc/asciilogo.txt" and
prints it to the Serial monitor.
Circuit:
* GSM shield attached to an Arduino
* SIM card with a data plan
created 8 Mar 2012
by Tom Igoe
http://arduino.cc/en/Tutorial/GSMExamplesWebClient
*/
// libraries
@ -30,7 +30,7 @@
// initialize the library instance
GSMClient client;
GPRS gprs;
GSM gsmAccess;
GSM gsmAccess;
// URL, path & port (for example: arduino.cc)
char server[] = "arduino.cc";
@ -51,10 +51,10 @@ void setup()
// After starting the modem with GSM.begin()
// attach the shield to the GPRS network with the APN, login and password
while(notConnected)
while (notConnected)
{
if((gsmAccess.begin(PINNUMBER)==GSM_READY) &
(gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY))
if ((gsmAccess.begin(PINNUMBER) == GSM_READY) &
(gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD) == GPRS_READY))
notConnected = false;
else
{
@ -77,7 +77,7 @@ void setup()
client.println(server);
client.println("Connection: close");
client.println();
}
}
else
{
// if you didn't get a connection to the server:
@ -87,7 +87,7 @@ void setup()
void loop()
{
// if there are incoming bytes available
// if there are incoming bytes available
// from the server, read them and print them:
if (client.available())
{
@ -103,7 +103,7 @@ void loop()
client.stop();
// do nothing forevermore:
for(;;)
for (;;)
;
}
}

36
libraries/GSM/examples/GsmWebServer/GsmWebServer.ino
View File

@ -1,13 +1,13 @@
/*
GSM Web Server
A simple web server that shows the value of the analog input pins.
using a GSM shield.
Circuit:
* GSM shield attached
* Analog inputs attached to pins A0 through A5 (optional)
created 8 Mar 2012
by Tom Igoe
*/
@ -30,7 +30,7 @@ GSM gsmAccess; // include a 'true' parameter for debug enabled
GSMServer server(80); // port 80 (http default)
// timeout
const unsigned long __TIMEOUT__ = 10*1000;
const unsigned long __TIMEOUT__ = 10 * 1000;
void setup()
{
@ -39,16 +39,16 @@ void setup()
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo only
}
// connection state
boolean notConnected = true;
// Start GSM shield
// If your SIM has PIN, pass it as a parameter of begin() in quotes
while(notConnected)
while (notConnected)
{
if((gsmAccess.begin(PINNUMBER)==GSM_READY) &
(gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY))
if ((gsmAccess.begin(PINNUMBER) == GSM_READY) &
(gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD) == GPRS_READY))
notConnected = false;
else
{
@ -56,12 +56,12 @@ void setup()
delay(1000);
}
}
Serial.println("Connected to GPRS network");
// start server
server.begin();
//Get IP.
IPAddress LocalIP = gprs.getIPAddress();
Serial.println("Server IP address=");
@ -77,21 +77,21 @@ void loop() {
if (client)
{
{
while (client.connected())
{
if (client.available())
{
Serial.println("Receiving request!");
bool sendResponse = false;
while(char c=client.read()) {
while (char c = client.read()) {
if (c == '\n') sendResponse = true;
}
// if you've gotten to the end of the line (received a newline
// character)
if (sendResponse)
{
// if you've gotten to the end of the line (received a newline
// character)
if (sendResponse)
{
// send a standard http response header
client.println("HTTP/1.1 200 OK");
client.println("Content-Type: text/html");
@ -103,7 +103,7 @@ void loop() {
client.print(analogChannel);
client.print(" is ");
client.print(analogRead(analogChannel));
client.println("<br />");
client.println("<br />");
}
client.println("</html>");
//necessary delay

48
libraries/GSM/examples/MakeVoiceCall/MakeVoiceCall.ino
View File

@ -1,21 +1,21 @@
/*
Make Voice Call
This sketch, for the Arduino GSM shield, puts a voice call to
a remote phone number that you enter through the serial monitor.
To make it work, open the serial monitor, and when you see the
READY message, type a phone number. Make sure the serial monitor
To make it work, open the serial monitor, and when you see the
READY message, type a phone number. Make sure the serial monitor
is set to send a just newline when you press return.
Circuit:
* GSM shield
* Voice circuit.
* GSM shield
* Voice circuit.
With no voice circuit the call will send nor receive any sound
created Mar 2012
by Javier Zorzano
This example is in the public domain.
*/
@ -42,15 +42,15 @@ void setup()
}
Serial.println("Make Voice Call");
// connection state
boolean notConnected = true;
// Start GSM shield
// If your SIM has PIN, pass it as a parameter of begin() in quotes
while(notConnected)
while (notConnected)
{
if(gsmAccess.begin(PINNUMBER)==GSM_READY)
if (gsmAccess.begin(PINNUMBER) == GSM_READY)
notConnected = false;
else
{
@ -58,7 +58,7 @@ void setup()
delay(1000);
}
}
Serial.println("GSM initialized.");
Serial.println("Enter phone number to call.");
@ -84,33 +84,33 @@ void loop()
// Call the remote number
remoteNumber.toCharArray(charbuffer, 20);
// Check if the receiving end has picked up the call
if(vcs.voiceCall(charbuffer))
if (vcs.voiceCall(charbuffer))
{
Serial.println("Call Established. Enter line to end");
// Wait for some input from the line
while(Serial.read()!='\n' && (vcs.getvoiceCallStatus()==TALKING));
while (Serial.read() != '\n' && (vcs.getvoiceCallStatus() == TALKING));
// And hang up
vcs.hangCall();
}
Serial.println("Call Finished");
remoteNumber="";
remoteNumber = "";
Serial.println("Enter phone number to call.");
}
}
else
{
Serial.println("That's too long for a phone number. I'm forgetting it");
Serial.println("That's too long for a phone number. I'm forgetting it");
remoteNumber = "";
}
}
}
else
{
// add the latest character to the message to send:
if(inChar!='\r')
if (inChar != '\r')
remoteNumber += inChar;
}
}
}
}

52
libraries/GSM/examples/ReceiveSMS/ReceiveSMS.ino
View File

@ -1,20 +1,20 @@
/*
SMS receiver
This sketch, for the Arduino GSM shield, waits for a SMS message
and displays it through the Serial port.
This sketch, for the Arduino GSM shield, waits for a SMS message
and displays it through the Serial port.
Circuit:
* GSM shield attached to and Arduino
* SIM card that can receive SMS messages
created 25 Feb 2012
by Javier Zorzano / TD
This example is in the public domain.
http://arduino.cc/en/Tutorial/GSMExamplesReceiveSMS
*/
// include the GSM library
@ -28,25 +28,25 @@ GSM gsmAccess;
GSM_SMS sms;
// Array to hold the number a SMS is retreived from
char senderNumber[20];
char senderNumber[20];
void setup()
void setup()
{
// initialize serial communications and wait for port to open:
Serial.begin(9600);
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo only
}
}
Serial.println("SMS Messages Receiver");
// connection state
boolean notConnected = true;
// Start GSM connection
while(notConnected)
while (notConnected)
{
if(gsmAccess.begin(PINNUMBER)==GSM_READY)
if (gsmAccess.begin(PINNUMBER) == GSM_READY)
notConnected = false;
else
{
@ -54,38 +54,38 @@ void setup()
delay(1000);
}
}
Serial.println("GSM initialized");
Serial.println("Waiting for messages");
}
void loop()
void loop()
{
char c;
// If there are any SMSs available()
// If there are any SMSs available()
if (sms.available())
{
Serial.println("Message received from:");
// Get remote number
sms.remoteNumber(senderNumber, 20);
Serial.println(senderNumber);
// An example of message disposal
// An example of message disposal
// Any messages starting with # should be discarded
if(sms.peek()=='#')
if (sms.peek() == '#')
{
Serial.println("Discarded SMS");
sms.flush();
}
// Read message bytes and print them
while(c=sms.read())
while (c = sms.read())
Serial.print(c);
Serial.println("\nEND OF MESSAGE");
// Delete message from modem memory
sms.flush();
Serial.println("MESSAGE DELETED");

56
libraries/GSM/examples/ReceiveVoiceCall/ReceiveVoiceCall.ino
View File

@ -1,24 +1,24 @@
/*
Receive Voice Call
This sketch, for the Arduino GSM shield, receives voice calls,
This sketch, for the Arduino GSM shield, receives voice calls,
displays the calling number, waits a few seconds then hangs up.
Circuit:
* GSM shield
* GSM shield
* Voice circuit. Refer to to the GSM shield getting started guide
at http://arduino.cc/en/Guide/ArduinoGSMShield#toc11
* SIM card that can accept voice calls
With no voice circuit the call will connect, but will not send or receive sound
created Mar 2012
by Javier Zorzano
This example is in the public domain.
http://arduino.cc/en/Tutorial/GSMExamplesReceiveVoiceCall
*/
// Include the GSM library
@ -32,7 +32,7 @@ GSM gsmAccess;
GSMVoiceCall vcs;
// Array to hold the number for the incoming call
char numtel[20];
char numtel[20];
void setup()
{
@ -43,15 +43,15 @@ void setup()
}
Serial.println("Receive Voice Call");
// connection state
boolean notConnected = true;
// Start GSM shield
// If your SIM has PIN, pass it as a parameter of begin() in quotes
while(notConnected)
while (notConnected)
{
if(gsmAccess.begin(PINNUMBER)==GSM_READY)
if (gsmAccess.begin(PINNUMBER) == GSM_READY)
notConnected = false;
else
{
@ -59,44 +59,44 @@ void setup()
delay(1000);
}
}
// This makes sure the modem correctly reports incoming events
vcs.hangCall();
Serial.println("Waiting for a call");
}
void loop()
{
// Check the status of the voice call
switch (vcs.getvoiceCallStatus())
switch (vcs.getvoiceCallStatus())
{
case IDLE_CALL: // Nothing is happening
break;
case RECEIVINGCALL: // Yes! Someone is calling us
Serial.println("RECEIVING CALL");
// Retrieve the calling number
vcs.retrieveCallingNumber(numtel, 20);
// Print the calling number
Serial.print("Number:");
Serial.println(numtel);
// Answer the call, establish the call
vcs.answerCall();
vcs.answerCall();
break;
case TALKING: // In this case the call would be established
Serial.println("TALKING. Press enter to hang up.");
while(Serial.read()!='\n')
while (Serial.read() != '\n')
delay(100);
vcs.hangCall();
Serial.println("Hanging up and waiting for the next call.");
Serial.println("Hanging up and waiting for the next call.");
break;
}
delay(1000);

42
libraries/GSM/examples/SendSMS/SendSMS.ino
View File

@ -1,24 +1,24 @@
/*
SMS sender
This sketch, for the Arduino GSM shield,sends an SMS message
you enter in the serial monitor. Connect your Arduino with the
GSM shield and SIM card, open the serial monitor, and wait for
the "READY" message to appear in the monitor. Next, type a
message to send and press "return". Make sure the serial
This sketch, for the Arduino GSM shield,sends an SMS message
you enter in the serial monitor. Connect your Arduino with the
GSM shield and SIM card, open the serial monitor, and wait for
the "READY" message to appear in the monitor. Next, type a
message to send and press "return". Make sure the serial
monitor is set to send a newline when you press return.
Circuit:
* GSM shield
* GSM shield
* SIM card that can send SMS
created 25 Feb 2012
by Tom Igoe
This example is in the public domain.
http://arduino.cc/en/Tutorial/GSMExamplesSendSMS
*/
// Include the GSM library
@ -37,7 +37,7 @@ void setup()
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo only
}
Serial.println("SMS Messages Sender");
// connection state
@ -45,9 +45,9 @@ void setup()
// Start GSM shield
// If your SIM has PIN, pass it as a parameter of begin() in quotes
while(notConnected)
while (notConnected)
{
if(gsmAccess.begin(PINNUMBER)==GSM_READY)
if (gsmAccess.begin(PINNUMBER) == GSM_READY)
notConnected = false;
else
{
@ -55,7 +55,7 @@ void setup()
delay(1000);
}
}
Serial.println("GSM initialized");
}
@ -66,7 +66,7 @@ void loop()
char remoteNum[20]; // telephone number to send sms
readSerial(remoteNum);
Serial.println(remoteNum);
// sms text
Serial.print("Now, enter SMS content: ");
char txtMsg[200];
@ -75,11 +75,11 @@ void loop()
Serial.println();
Serial.println("Message:");
Serial.println(txtMsg);
// send the message
sms.beginSMS(remoteNum);
sms.print(txtMsg);
sms.endSMS();
sms.endSMS();
Serial.println("\nCOMPLETE!\n");
}
@ -89,7 +89,7 @@ void loop()
int readSerial(char result[])
{
int i = 0;
while(1)
while (1)
{
while (Serial.available() > 0)
{
@ -100,7 +100,7 @@ int readSerial(char result[])
Serial.flush();
return 0;
}
if(inChar!='\r')
if (inChar != '\r')
{
result[i] = inChar;
i++;

116
libraries/GSM/examples/Tools/BandManagement/BandManagement.ino
View File

@ -1,24 +1,24 @@
/*
Band Management
This sketch, for the Arduino GSM shield, checks the band
currently configured in the modem and allows you to change
currently configured in the modem and allows you to change
it.
Please check http://www.worldtimezone.com/gsm.html
Usual configurations:
Europe, Africa, Middle East: E-GSM(900)+DCS(1800)
USA, Canada, South America: GSM(850)+PCS(1900)
Mexico: PCS(1900)
Brazil: GSM(850)+E-GSM(900)+DCS(1800)+PCS(1900)
Circuit:
* GSM shield
* GSM shield
created 12 June 2012
by Javier Zorzano, Scott Fitzgerald
This example is in the public domain.
*/
@ -35,18 +35,18 @@ void setup()
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo only
}
// Beginning the band manager restarts the modem
Serial.println("Restarting modem...");
band.begin();
Serial.println("Modem restarted.");
};
void loop()
{
// Get current band
// Get current band
String bandName = band.getBand(); // Get and print band name
Serial.print("Current band:");
Serial.println(bandName);
@ -54,25 +54,25 @@ void loop()
String newBandName;
newBandName = askUser();
// Tell the user what we are about to do…
Serial.print("\nConfiguring band ");
Serial.println(newBandName);
// Change the band
boolean operationSuccess;
operationSuccess = band.setBand(newBandName);
// Tell the user if the operation was OK
if(operationSuccess)
{
Serial.print("\nConfiguring band ");
Serial.println(newBandName);
// Change the band
boolean operationSuccess;
operationSuccess = band.setBand(newBandName);
// Tell the user if the operation was OK
if (operationSuccess)
{
Serial.println("Success");
}
}
else
{
{
Serial.println("Error while changing band");
}
if(operationSuccess)
{
while(true);
}
}
if (operationSuccess)
{
while (true);
}
}
// This function offers the user different options
@ -80,41 +80,41 @@ void loop()
// The user selects one
String askUser()
{
String newBand;
Serial.println("Select band:");
// Print the different options
Serial.println("1 : E-GSM(900)");
Serial.println("2 : DCS(1800)");
Serial.println("3 : PCS(1900)");
Serial.println("4 : E-GSM(900)+DCS(1800) ex: Europe");
Serial.println("5 : GSM(850)+PCS(1900) Ex: USA, South Am.");
Serial.println("6 : GSM(850)+E-GSM(900)+DCS(1800)+PCS(1900)");
// Empty the incoming buffer
while(Serial.available())
Serial.read();
// Wait for an answer, just look at the first character
while(!Serial.available());
char c= Serial.read();
if(c=='1')
newBand=GSM_MODE_EGSM;
else if(c=='2')
newBand=GSM_MODE_DCS;
else if(c=='3')
newBand=GSM_MODE_PCS;
else if(c=='4')
newBand=GSM_MODE_EGSM_DCS;
else if(c=='5')
newBand=GSM_MODE_GSM850_PCS;
else if(c=='6')
newBand=GSM_MODE_GSM850_EGSM_DCS_PCS;
String newBand;
Serial.println("Select band:");
// Print the different options
Serial.println("1 : E-GSM(900)");
Serial.println("2 : DCS(1800)");
Serial.println("3 : PCS(1900)");
Serial.println("4 : E-GSM(900)+DCS(1800) ex: Europe");
Serial.println("5 : GSM(850)+PCS(1900) Ex: USA, South Am.");
Serial.println("6 : GSM(850)+E-GSM(900)+DCS(1800)+PCS(1900)");
// Empty the incoming buffer
while (Serial.available())
Serial.read();
// Wait for an answer, just look at the first character
while (!Serial.available());
char c = Serial.read();
if (c == '1')
newBand = GSM_MODE_EGSM;
else if (c == '2')
newBand = GSM_MODE_DCS;
else if (c == '3')
newBand = GSM_MODE_PCS;
else if (c == '4')
newBand = GSM_MODE_EGSM_DCS;
else if (c == '5')
newBand = GSM_MODE_GSM850_PCS;
else if (c == '6')
newBand = GSM_MODE_GSM850_EGSM_DCS_PCS;
else
newBand="GSM_MODE_UNDEFINED";
newBand = "GSM_MODE_UNDEFINED";
return newBand;
}

36
libraries/GSM/examples/Tools/GsmScanNetworks/GsmScanNetworks.ino
View File

@ -1,23 +1,23 @@
/*
GSM Scan Networks
This example prints out the IMEI number of the modem,
then checks to see if it's connected to a carrier. If so,
then checks to see if it's connected to a carrier. If so,
it prints the phone number associated with the card.
Then it scans for nearby networks and prints out their signal strengths.
Circuit:
* GSM shield
* GSM shield
* SIM card
Created 8 Mar 2012
by Tom Igoe, implemented by Javier Carazo
Modified 4 Feb 2013
by Scott Fitzgerald
http://arduino.cc/en/Tutorial/GSMToolsGsmScanNetworks
This example code is part of the public domain
*/
@ -48,15 +48,15 @@ void setup()
Serial.println("GSM networks scanner");
scannerNetworks.begin();
// connection state
boolean notConnected = true;
// Start GSM shield
// If your SIM has PIN, pass it as a parameter of begin() in quotes
while(notConnected)
while (notConnected)
{
if(gsmAccess.begin(PINNUMBER)==GSM_READY)
if (gsmAccess.begin(PINNUMBER) == GSM_READY)
notConnected = false;
else
{
@ -64,13 +64,13 @@ void setup()
delay(1000);
}
}
// get modem parameters
// IMEI, modem unique identifier
Serial.print("Modem IMEI: ");
IMEI = modemTest.getIMEI();
IMEI.replace("\n","");
if(IMEI != NULL)
IMEI.replace("\n", "");
if (IMEI != NULL)
Serial.println(IMEI);
}
@ -79,11 +79,11 @@ void loop()
// scan for existing networks, displays a list of networks
Serial.println("Scanning available networks. May take some seconds.");
Serial.println(scannerNetworks.readNetworks());
// currently connected carrier
// currently connected carrier
Serial.print("Current carrier: ");
Serial.println(scannerNetworks.getCurrentCarrier());
// returns strength and ber
// signal strength in 0-31 scale. 31 means power > 51dBm
// BER is the Bit Error Rate. 0-7 scale. 99=not detectable

60
libraries/GSM/examples/Tools/PinManagement/PinManagement.ino
View File

@ -1,19 +1,19 @@
/*
This example enables you to change or remove the PIN number of
This example enables you to change or remove the PIN number of
a SIM card inserted into a GSM shield.
Circuit:
* GSM shield
* SIM card
Created 12 Jun 2012
by David del Peral
This example code is part of the public domain
This example code is part of the public domain
http://arduino.cc/en/Tutorial/GSMToolsPinManagement
*/
// libraries
@ -39,32 +39,32 @@ void setup()
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo only
}
Serial.println("Change PIN example\n");
PINManager.begin();
// check if the SIM have pin lock
while(!auth){
while (!auth) {
int pin_query = PINManager.isPIN();
if(pin_query == 1)
if (pin_query == 1)
{
// if SIM is locked, enter PIN code
Serial.print("Enter PIN code: ");
user_input = readSerial();
// check PIN code
if(PINManager.checkPIN(user_input) == 0)
if (PINManager.checkPIN(user_input) == 0)
{
auth = true;
PINManager.setPINUsed(true);
Serial.println(oktext);
}
else
{
{
// if PIN code was incorrected
Serial.println("Incorrect PIN. Remember that you have 3 opportunities.");
}
}
else if(pin_query == -1)
else if (pin_query == -1)
{
// PIN code is locked, user must enter PUK code
Serial.println("PIN locked. Enter PUK code: ");
@ -72,7 +72,7 @@ void setup()
Serial.print("Now, enter a new PIN code: ");
user_input = readSerial();
// check PUK code
if(PINManager.checkPUK(puk, user_input) == 0)
if (PINManager.checkPUK(puk, user_input) == 0)
{
auth = true;
PINManager.setPINUsed(true);
@ -84,32 +84,32 @@ void setup()
Serial.println("Incorrect PUK or invalid new PIN. Try again!.");
}
}
else if(pin_query == -2)
else if (pin_query == -2)
{
// the worst case, PIN and PUK are locked
Serial.println("PIN & PUK locked. Use PIN2/PUK2 in a mobile phone.");
while(true);
while (true);
}
else
{
// SIM does not requires authetication
// SIM does not requires authetication
Serial.println("No pin necessary.");
auth = true;
}
}
// start GSM shield
Serial.print("Checking register in GSM network...");
if(PINManager.checkReg() == 0)
if (PINManager.checkReg() == 0)
Serial.println(oktext);
// if you are connect by roaming
else if(PINManager.checkReg() == 1)
Serial.println("ROAMING " + oktext);
else if (PINManager.checkReg() == 1)
Serial.println("ROAMING " + oktext);
else
{
// error connection
Serial.println(errortext);
while(true);
while (true);
}
}
@ -118,19 +118,19 @@ void loop()
// Function loop implements pin management user menu
// Only if you SIM use pin lock, you can change PIN code
// user_op variables save user option
Serial.println("Choose an option:\n1 - On/Off PIN.");
if(PINManager.getPINUsed())
if (PINManager.getPINUsed())
Serial.println("2 - Change PIN.");
String user_op = readSerial();
if(user_op == "1")
if (user_op == "1")
{
Serial.println("Enter your PIN code:");
user_input = readSerial();
// activate/deactivate PIN lock
PINManager.switchPIN(user_input);
}
else if(user_op == "2" & PINManager.getPINUsed())
else if (user_op == "2" & PINManager.getPINUsed())
{
Serial.println("Enter your actual PIN code:");
String oldPIN = readSerial();
@ -152,7 +152,7 @@ void loop()
String readSerial()
{
String text = "";
while(1)
while (1)
{
while (Serial.available() > 0)
{
@ -161,7 +161,7 @@ String readSerial()
{
return text;
}
if(inChar!='\r')
if (inChar != '\r')
text += inChar;
}
}

78
libraries/GSM/examples/Tools/TestGPRS/TestGPRS.ino
View File

@ -1,20 +1,20 @@
/*
This sketch test the GSM shield's ability to connect to a
GPERS network. It asks for APN information through the
GPERS network. It asks for APN information through the
serial monitor and tries to connect to arduino.cc.
Circuit:
* GSM shield attached
* SIM card with data plan
Created 18 Jun 2012
by David del Peral
This example code is part of the public domain
http://arduino.cc/en/Tutorial/GSMToolsTestGPRS
*/
// libraries
@ -55,53 +55,53 @@ void setup()
void loop()
{
use_proxy = false;
// start GSM shield
// if your SIM has PIN, pass it as a parameter of begin() in quotes
Serial.print("Connecting GSM network...");
if(gsmAccess.begin(PINNUMBER)!=GSM_READY)
if (gsmAccess.begin(PINNUMBER) != GSM_READY)
{
Serial.println(errortext);
while(true);
while (true);
}
Serial.println(oktext);
// read APN introduced by user
char apn[50];
Serial.print("Enter your APN: ");
readSerial(apn);
Serial.println(apn);
// Read APN login introduced by user
char login[50];
Serial.print("Now, enter your login: ");
readSerial(login);
Serial.println(login);
// read APN password introduced by user
char password[20];
Serial.print("Finally, enter your password: ");
readSerial(password);
// attach GPRS
Serial.println("Attaching to GPRS with your APN...");
if(gprsAccess.attachGPRS(apn, login, password)!=GPRS_READY)
if (gprsAccess.attachGPRS(apn, login, password) != GPRS_READY)
{
Serial.println(errortext);
}
else{
else {
Serial.println(oktext);
// read proxy introduced by user
char proxy[100];
Serial.print("If your carrier uses a proxy, enter it, if not press enter: ");
readSerial(proxy);
Serial.println(proxy);
// if user introduced a proxy, asks him for proxy port
int pport;
if(proxy[0] != '\0'){
if (proxy[0] != '\0') {
// read proxy port introduced by user
char proxyport[10];
Serial.print("Enter the proxy port: ");
@ -111,61 +111,61 @@ void loop()
use_proxy = true;
Serial.println(proxyport);
}
// connection with arduino.cc and realize HTTP request
Serial.print("Connecting and sending GET request to arduino.cc...");
int res_connect;
// if use a proxy, connect with it
if(use_proxy)
if (use_proxy)
res_connect = client.connect(proxy, pport);
else
res_connect = client.connect(url, 80);
if (res_connect)
{
// make a HTTP 1.0 GET request (client sends the request)
client.print("GET ");
// if use a proxy, the path is arduino.cc URL
if(use_proxy)
if (use_proxy)
client.print(urlproxy);
else
client.print(path);
client.println(" HTTP/1.0");
client.println();
Serial.println(oktext);
}
}
else
{
// if you didn't get a connection to the server
Serial.println(errortext);
}
Serial.print("Receiving response...");
boolean test = true;
while(test)
while (test)
{
// if there are incoming bytes available
// if there are incoming bytes available
// from the server, read and check them
if (client.available())
{
char c = client.read();
response += c;
// cast response obtained from string to char array
char responsechar[response.length()+1];
response.toCharArray(responsechar, response.length()+1);
char responsechar[response.length() + 1];
response.toCharArray(responsechar, response.length() + 1);
// if response includes a "200 OK" substring
if(strstr(responsechar, "200 OK") != NULL){
if (strstr(responsechar, "200 OK") != NULL) {
Serial.println(oktext);
Serial.println("TEST COMPLETE!");
test = false;
}
}
// if the server's disconnected, stop the client:
if (!client.connected())
{
@ -184,7 +184,7 @@ void loop()
int readSerial(char result[])
{
int i = 0;
while(1)
while (1)
{
while (Serial.available() > 0)
{
@ -194,7 +194,7 @@ int readSerial(char result[])
result[i] = '\0';
return 0;
}
if(inChar!='\r')
if (inChar != '\r')
{
result[i] = inChar;
i++;

30
libraries/GSM/examples/Tools/TestModem/TestModem.ino
View File

@ -1,21 +1,21 @@
/*
This example tests to see if the modem of the
GSM shield is working correctly. You do not need
This example tests to see if the modem of the
GSM shield is working correctly. You do not need
a SIM card for this example.
Circuit:
* GSM shield attached
* GSM shield attached
Created 12 Jun 2012
by David del Peral
modified 21 Nov 2012
by Tom Igoe
http://arduino.cc/en/Tutorial/GSMToolsTestModem
This sample code is part of the public domain
*/
// libraries
@ -34,10 +34,10 @@ void setup()
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo only
}
// start modem test (reset and check response)
Serial.print("Starting modem test...");
if(modem.begin())
if (modem.begin())
Serial.println("modem.begin() succeeded");
else
Serial.println("ERROR, no modem answer.");
@ -48,9 +48,9 @@ void loop()
// get modem IMEI
Serial.print("Checking IMEI...");
IMEI = modem.getIMEI();
// check IMEI response
if(IMEI != NULL)
if (IMEI != NULL)
{
// show IMEI in serial monitor
Serial.println("Modem's IMEI: " + IMEI);
@ -58,7 +58,7 @@ void loop()
Serial.print("Resetting modem...");
modem.begin();
// get and check IMEI one more time
if(modem.getIMEI() != NULL)
if (modem.getIMEI() != NULL)
{
Serial.println("Modem is functoning properly");
}
@ -72,6 +72,6 @@ void loop()
Serial.println("Error: Could not get IMEI");
}
// do nothing:
while(true);
while (true);
}

34
libraries/GSM/examples/Tools/TestWebServer/TestWebServer.ino
View File

@ -1,22 +1,22 @@
/*
Basic Web Server
A simple web server that replies with nothing, but prints the client's request
and the server IP address.
Circuit:
* GSM shield attached
created
created
by David Cuartielles
modified 21 Nov 2012
by Tom Igoe
http://arduino.cc/en/Tutorial/GSMToolsTestWebServer
This example code is part of the public domain
*/
#include <GSM.h>
#include <GSM.h>
// PIN Number
#define PINNUMBER ""
@ -33,7 +33,7 @@ GSM gsmAccess; // include a 'true' parameter for debug enabled
GSMServer server(80); // port 80 (http default)
// timeout
const unsigned long __TIMEOUT__ = 10*1000;
const unsigned long __TIMEOUT__ = 10 * 1000;
void setup()
{
@ -49,10 +49,10 @@ void setup()
// Start GSM shield
// If your SIM has PIN, pass it as a parameter of begin() in quotes
while(!connected)
while (!connected)
{
if((gsmAccess.begin(PINNUMBER)==GSM_READY) &
(gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY))
if ((gsmAccess.begin(PINNUMBER) == GSM_READY) &
(gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD) == GPRS_READY))
connected = true;
else
{
@ -72,14 +72,14 @@ void setup()
Serial.println(LocalIP);
}
void loop(){
void loop() {
GSMClient client = server.available();
if (client) {
if (client.available()) {
Serial.write(client.read());
}
}
if (client) {
if (client.available()) {
Serial.write(client.read());
}
}
}