arduino/esp8266
1
0
Fork 0
mirror of https://github.com/esp8266/Arduino.git synced 2025-07-30 16:24:09 +03:00
Code Activity

Run new astyle formatter against all the examples

Browse Source
This commit is contained in:
Federico Fissore
2013-10-21 09:58:40 +02:00
parent 3c6ee46828
commit b4c68b3dff
259 changed files with 5160 additions and 5217 deletions
Download Patch File Download Diff File Expand all files Collapse all files

78
libraries/Esplora/examples/Experts/EsploraRemote/EsploraRemote.ino
View File

@ -1,28 +1,28 @@
/*
Esplora Remote
This sketch allows to test all the Esplora's peripherals.
It is also used with the ProcessingStart sketch (for Processing).
When uploaded, you can open the Serial monitor and write one of
the following commands (without quotes) to get an answer:
"D": prints the current value of all sensors, separated by a comma.
See the dumpInputs() function below to get the meaning of
each value.
"Rxxx"
"Gxxx"
"Bxxx": set the color of the RGB led. For example, write "R255"
to turn on the red to full brightness, "G128" to turn
the green to half brightness, or "G0" to turn off
the green channel.
"Txxxx": play a tone with the buzzer. The number is the
frequency, e.g. "T440" plays the central A note.
Write "T0" to turn off the buzzer.
Created on 22 november 2012
By Enrico Gueli <enrico.gueli@gmail.com>
Modified 23 Dec 2012
@ -32,7 +32,7 @@
#include <Esplora.h>
void setup() {
while(!Serial); // needed for Leonardo-based board like Esplora
while (!Serial); // needed for Leonardo-based board like Esplora
Serial.begin(9600);
}
@ -48,53 +48,53 @@ void loop() {
*/
void parseCommand() {
char cmd = Serial.read();
switch(cmd) {
case 'D':
dumpInputs();
break;
case 'R':
setRed();
break;
case 'G':
setGreen();
break;
case 'B':
setBlue();
break;
case 'T':
setTone();
break;
switch (cmd) {
case 'D':
dumpInputs();
break;
case 'R':
setRed();
break;
case 'G':
setGreen();
break;
case 'B':
setBlue();
break;
case 'T':
setTone();
break;
}
}
void dumpInputs() {
Serial.print(Esplora.readButton(SWITCH_1));
void dumpInputs() {
Serial.print(Esplora.readButton(SWITCH_1));
Serial.print(',');
Serial.print(Esplora.readButton(SWITCH_2));
Serial.print(Esplora.readButton(SWITCH_2));
Serial.print(',');
Serial.print(Esplora.readButton(SWITCH_3));
Serial.print(Esplora.readButton(SWITCH_3));
Serial.print(',');
Serial.print(Esplora.readButton(SWITCH_4));
Serial.print(Esplora.readButton(SWITCH_4));
Serial.print(',');
Serial.print(Esplora.readSlider());
Serial.print(Esplora.readSlider());
Serial.print(',');
Serial.print(Esplora.readLightSensor());
Serial.print(Esplora.readLightSensor());
Serial.print(',');
Serial.print(Esplora.readTemperature(DEGREES_C));
Serial.print(Esplora.readTemperature(DEGREES_C));
Serial.print(',');
Serial.print(Esplora.readMicrophone());
Serial.print(Esplora.readMicrophone());
Serial.print(',');
Serial.print(Esplora.readJoystickSwitch());
Serial.print(Esplora.readJoystickSwitch());
Serial.print(',');
Serial.print(Esplora.readJoystickX());
Serial.print(Esplora.readJoystickX());
Serial.print(',');
Serial.print(Esplora.readJoystickY());
Serial.print(Esplora.readJoystickY());
Serial.print(',');
Serial.print(Esplora.readAccelerometer(X_AXIS));
Serial.print(Esplora.readAccelerometer(X_AXIS));
Serial.print(',');
Serial.print(Esplora.readAccelerometer(Y_AXIS));
Serial.print(Esplora.readAccelerometer(Y_AXIS));
Serial.print(',');
Serial.print(Esplora.readAccelerometer(Z_AXIS));
Serial.print(Esplora.readAccelerometer(Z_AXIS));
Serial.println();
}