Temboo: library and examples update

libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino

@@ -55,7 +55,7 @@
 #include <Bridge.h>
 #include <Temboo.h>
 #include "TembooAccount.h" // contains Temboo account information
-// as described in the footer comment below
+                           // as described in the footer comment below
 
 
 
@@ -98,7 +98,7 @@ void setup() {
 
   // for debugging, wait until a serial console is connected
   delay(4000);
-  while (!Serial);
+  while(!Serial);
 
   // tell the board to treat the LED pin as an output.
   pinMode(LED_PIN, OUTPUT);
@@ -214,7 +214,7 @@ void checkForMessages(bool ignoreCommands) {
     // lists containing the Sids and texts of the messages
     // from our designated phone number.
 
-    while (ListMessagesChoreo.available()) {
+    while(ListMessagesChoreo.available()) {
       
       // output names are terminated with '\x1F' characters.
       String name = ListMessagesChoreo.readStringUntil('\x1F');
@@ -243,7 +243,7 @@ void checkForMessages(bool ignoreCommands) {
   } else {
     // a non-zero return code means there was an error
     // read and print the error message
-    while (ListMessagesChoreo.available()) {
+    while(ListMessagesChoreo.available()) {
       char c = ListMessagesChoreo.read();
       Serial.print(c);
     }
@@ -333,7 +333,7 @@ void processMessages(String messageTexts, String messageSids, bool ignoreCommand
 
       // keep going until either we run out of list items
       // or we run into a message we processed on a previous run.
-    } while ((i >= 0) && (sid != lastSid));
+    } while ((i >=0) && (sid != lastSid));
    
     // print what we've found to the serial monitor, 
     // just so we can see what's going on.

libraries/Bridge/examples/Temboo/GetYahooWeatherReport/GetYahooWeatherReport.ino

@@ -20,7 +20,7 @@
 #include <Bridge.h>
 #include <Temboo.h>
 #include "TembooAccount.h" // contains Temboo account information
-// as described in the footer comment below
+                           // as described in the footer comment below
 
 
 // the address for which a weather forecast will be retrieved
@@ -35,7 +35,7 @@ void setup() {
     
   // for debugging, wait until a serial console is connected
   delay(4000);
-  while (!Serial);
+  while(!Serial);
   Bridge.begin();
 
 }
@@ -79,7 +79,7 @@ void loop()
     GetWeatherByAddressChoreo.run();
         
     // when the choreo results are available, print them to the serial monitor
-    while (GetWeatherByAddressChoreo.available()) {
+    while(GetWeatherByAddressChoreo.available()) {
           
       char c = GetWeatherByAddressChoreo.read();    
       Serial.print(c);

libraries/Bridge/examples/Temboo/ReadATweet/ReadATweet.ino

@@ -27,7 +27,7 @@
 #include <Bridge.h>
 #include <Temboo.h>
 #include "TembooAccount.h" // contains Temboo account information
-// as described in the footer comment below
+                           // as described in the footer comment below
 
 /*** SUBSTITUTE YOUR VALUES BELOW: ***/
 
@@ -46,7 +46,7 @@ void setup() {
   
   // For debugging, wait until a serial console is connected.
   delay(4000);
-  while (!Serial);
+  while(!Serial);
   Bridge.begin();
 }
 void loop()
@@ -99,7 +99,7 @@ void loop()
     unsigned int returnCode = HomeTimelineChoreo.run();
     
    // a response code of 0 means success; print the API response
-    if (returnCode == 0) {
+    if(returnCode == 0) {
       
       String author; // a String to hold the tweet author's name
       String tweet; // a String to hold the text of the tweet
@@ -115,7 +115,7 @@ void loop()
       // see the examples at http://www.temboo.com/arduino for more details
       // we can read this format into separate variables, as follows:
       
-      while (HomeTimelineChoreo.available()) {
+      while(HomeTimelineChoreo.available()) {
         // read the name of the output item
         String name = HomeTimelineChoreo.readStringUntil('\x1F');
         name.trim();
@@ -137,7 +137,7 @@ void loop()
     } else {
       // there was an error
       // print the raw output from the choreo
-      while (HomeTimelineChoreo.available()) {
+      while(HomeTimelineChoreo.available()) {
         char c = HomeTimelineChoreo.read();
         Serial.print(c);
       }

libraries/Bridge/examples/Temboo/SendATweet/SendATweet.ino

@@ -28,7 +28,7 @@
 #include <Bridge.h>
 #include <Temboo.h>
 #include "TembooAccount.h" // contains Temboo account information
-// as described in the footer comment below
+                           // as described in the footer comment below
 
 
 /*** SUBSTITUTE YOUR VALUES BELOW: ***/
@@ -48,7 +48,7 @@ void setup() {
 
   // for debugging, wait until a serial console is connected
   delay(4000);
-  while (!Serial);
+  while(!Serial);
 
   Bridge.begin();
 }

libraries/Bridge/examples/Temboo/SendAnEmail/SendAnEmail.ino

@@ -24,7 +24,7 @@
 #include <Bridge.h>
 #include <Temboo.h>
 #include "TembooAccount.h" // contains Temboo account information
-// as described in the footer comment below
+                           // as described in the footer comment below
 
 /*** SUBSTITUTE YOUR VALUES BELOW: ***/
 
@@ -48,7 +48,7 @@ void setup() {
 
   // for debugging, wait until a serial console is connected
   delay(4000);
-  while (!Serial);
+  while(!Serial);
 
   Bridge.begin();
 }

libraries/Bridge/examples/Temboo/SendAnSMS/SendAnSMS.ino

@@ -33,7 +33,7 @@
 #include <Bridge.h>
 #include <Temboo.h>
 #include "TembooAccount.h" // contains Temboo account information
-// as described in the footer comment below
+                           // as described in the footer comment below
 
 
 
@@ -62,7 +62,7 @@ void setup() {
 
   // for debugging, wait until a serial console is connected
   delay(4000);
-  while (!Serial);
+  while(!Serial);
 
   Bridge.begin();
 }
@@ -128,7 +128,7 @@ void loop()
     SendSMSChoreo.close();
     
     // set the flag indicatine we've tried once.
-    attempted = true;
+    attempted=true;
   }
 }
 

libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/SendDataToGoogleSpreadsheet.ino

@@ -38,7 +38,7 @@
 #include <Bridge.h>
 #include <Temboo.h>
 #include "TembooAccount.h" // contains Temboo account information, 
-// as described in the footer comment below
+                           // as described in the footer comment below
 
 
 /*** SUBSTITUTE YOUR VALUES BELOW: ***/
@@ -60,14 +60,14 @@ const unsigned long RUN_INTERVAL_MILLIS = 60000; // how often to run the Choreo
 // the last time we ran the Choreo 
 // (initialized to 60 seconds ago so the
 // Choreo is run immediately when we start up)
-unsigned long lastRun = (unsigned long) - 60000;
+unsigned long lastRun = (unsigned long)-60000;
 
 void setup() {
   
   // for debugging, wait until a serial console is connected
   Serial.begin(9600);
   delay(4000);
-  while (!Serial);
+  while(!Serial);
 
   Serial.print("Initializing the bridge...");
   Bridge.begin();

libraries/Bridge/examples/Temboo/SendDataToMySQL/SendDataToMySQL.ino

@@ -0,0 +1,328 @@
+/*
+  SendDataToMySQL
+
+  Demonstrates storing and reading values in a MySQL database using
+  the Temboo Arduino Yun SDK. This example will periodically
+  update a MySQL instance with dummy sensor values from the Yun, and
+  then read those values back from the database.
+
+  Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
+
+  A Temboo account and application key are necessary to run all Temboo examples. 
+  If you don't already have one, you can register for a free Temboo account at 
+  http://www.temboo.com
+
+  To use this example, you'll need a MySQL instance. These instructions
+  assume that you are using an Amazon RDS instance in the "US East"
+  region. For details on how to use a database hosted elsewhere, see
+  http://temboo.com/library/Library/MySQL
+
+  To configure an RDS MySQL instance for Temboo connectivity:
+
+  1. If you don't already have one, create an Amazon AWS account and
+  a new MySQL RDS instance. The instructions at 
+  http://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/CHAP_GettingStarted.html
+  will guide you through this process. Be sure to select the "US East (N.  Virginia)" 
+  region in the dropdown menu in the upper right side of the RDS Management Console 
+  before creating the new instance.
+
+  2. Configure your RDS instance by adding a security rule to allow access
+  by Temboo. If you're familiar with the RDS command line tools,
+  you can do so using the instructions at https://www.temboo.com/library/Library/MySQL/
+  If you're not familiar with the RDS command line tools, the following steps
+  will guide you through this process using a Temboo Choreo:
+
+  -Obtain your AWS Access Key ID and Secret Access Key from the "Security Credentials" 
+  pane of the AWS management console. If you haven't yet created an Access Key, you
+  will be able to do so from this interface.
+
+  -Log in to your Temboo account at https://www.temboo.com/login
+
+  -Navigate to https://www.temboo.com/library/Library/Amazon/RDS/AuthorizeDBSecurityGroupIngress/
+
+  -Turn on Run Mode, and enter the following inputs:
+
+    AWSAccessKeyId:          your AWS access key
+    AWSSecretKeyId:          your AWS secret key 
+    CIDRIP:                  (leave empty)
+    DBSecurityGroupName:     your RDS DBSecurityGroup name
+    EC2SecurityGroupName:    Temboo Access
+    EC2SecurityGroupOwnerId: 114370834540
+
+  -Click the "Try it Out" button. If all went well, you should see an XML document 
+  in the "Output" section of the Choreo description page listing the access permissions 
+  in your RDS security group. Temboo should now have access to your RDS database.
+  
+  3. To run the SendDataToMySQL sketch, you'll need the following information
+  about your database. These values can be found on the RDS Management Console: 
+
+  -The address of the DB server (eg, somename.abc3xy6ijklmn.us-east-1.rds.amazonaws.com)
+  -The database name
+  -A username for a user with read, write, and create access to the DB
+  -The password for that user
+
+  Substitute these values into the DATABASE_SERVER, DATABASE_NAME, DATABASE_USERNAME, 
+  and DATABASE_PASSWORD constants in the sketch.
+
+  When you run the sketch, it will attempt to create a new table named "readings" in the 
+  database if it doesn't already exist. The table contains two columns: an unsigned INT 
+  column named "cpu_time" and an INT column named "sensor_value".
+
+  This example assumes basic familiarity with Arduino sketches, and that your Yun is connected
+  to the Internet.
+
+  Looking for another API to use with your Arduino Yun? We've got over 100 in our Library!
+
+  This example code is in the public domain.
+
+*/
+
+#include <Bridge.h>
+#include <Temboo.h>
+#include "TembooAccount.h" // contains Temboo account information, 
+                           // as described in the footer comment below
+
+
+/*** SUBSTITUTE YOUR VALUES BELOW: ***/
+
+// Note that for additional security and reusability, you could
+// use #define statements to specify these values in a .h file.
+
+const String DATABASE_SERVER = "server-address-of-your-MySQL-instance";
+const String DATABASE_NAME = "your-MySQL-database-name";
+const String DATABASE_USERNAME = "your-MySQL-user-name";
+const String DATABASE_PASSWORD = "your-MySQL-user-password";
+
+// the name of the table to write to and read from
+const String DATABASE_TABLE_NAME = "readings";
+
+
+// how often to run the Choreo (in milliseconds)
+const unsigned long RUN_INTERVAL_MILLIS = 60000; 
+
+// the last time we ran the Choreos (initialized to 60 seconds ago,
+// so the Choreos are run immediately when we start up)
+unsigned long lastRun = (unsigned long)-60000;
+
+// a flag to indicate if we were able to create the table
+// (or that it already existed)
+bool haveTable = false;
+
+void setup() {
+  
+  // for debugging, wait until a serial console is connected
+  Serial.begin(9600);
+  delay(4000);
+  while(!Serial);
+
+  Serial.print("Initializing the bridge...");
+  Bridge.begin();
+  Serial.println("OK");
+
+  // make sure the table we need exists or create it if it doesn't
+  // (see the comments in the createTable function for details)
+  unsigned int result = createTable();
+
+  // set the 'haveTable' flag to true on success,
+  // or false if there was a problem creating the table
+  haveTable = (result == 0);
+}
+
+void loop()
+{
+  // get the number of milliseconds this sketch has been running
+  unsigned long now = millis();
+
+  // run again if it's been RUN_INTERVAL_MILLIS milliseconds since we last ran
+  if (now - lastRun >= RUN_INTERVAL_MILLIS) {
+
+    // remember 'now' as the last time we ran the choreo
+    lastRun = now;
+
+    // do the database write/read only if we have the table.
+    if (haveTable) { 
+
+      // get the value we want to add to our table
+      int sensorValue = getSensorValue();
+
+      // add a record containing the cpu time and sensor value
+      appendRow(now, sensorValue);
+
+      // Read the values just written to verify that they really
+      // did get sent to the database. (Not necessary in a real
+      // sketch, but done here to demonstrate retrieving data.)
+      retrieveRow(now);
+
+    } else {
+      Serial.println("Table creation failed, not appending row.");
+    }
+ }
+}
+
+/* 
+ * createTable is a function that executes a SQL statement to
+ * create a table with the correct columns needed for this sketch.
+ */
+unsigned int createTable() {
+  Serial.print("Creating table '" + DATABASE_TABLE_NAME + "' (if needed)...");
+
+  // We need a table with columns to contain the cpu time and the sensor value.
+  // cpu time is an 'unsigned long' which is 4 bytes on the Yun, 
+  // so an INT UNSIGNED in MySQL will hold any possible value.
+  // Our sensor values are 'int' values on the Yun, 
+  // so an INT in MySQL will hold all possible values.
+
+  // Create a String containing the SQL statement to create the table.
+  String sql = "CREATE TABLE IF NOT EXISTS " + DATABASE_TABLE_NAME + " (cpu_time INT UNSIGNED, sensor_value INT);";
+
+  // Send the SQL to Temboo so it can forward it to your database.
+  unsigned int result = executeSQLCommand(sql, false);
+
+  // If there was an error, the executeSQLCommand function will have 
+  // printed it to the Serial console.  Otherwise, print OK.
+  if (result == 0) {
+    Serial.println("OK");
+  }
+
+  return result;
+}
+
+/* 
+ * appendRow is a function that executes a SQL statement to
+ * insert a new row of data into the database.
+ * cpuTime is the value to be inserted into the cpu_time column
+ * value is the value wot be inserted into the sensor_value column
+ */
+unsigned int appendRow(unsigned long cpuTime, int value) {
+  Serial.print("Inserting row " + String(cpuTime) + ", " + String(value) + "...");
+
+  // Create a String containing the SQL statement to insert a row.
+  String sql = "INSERT " + DATABASE_TABLE_NAME + " VALUES (" + cpuTime + "," + value + ");";
+
+  // Send the SQL to Temboo so it can forward it to your database.
+  unsigned int result = executeSQLCommand(sql, false);
+
+  // If there was an error, the executeSQLCommand function will have 
+  // printed it to the Serial console.  Otherwise, print OK.
+  if (result == 0) {
+    Serial.println("OK");
+  }
+  return result;
+}
+
+/*
+ * retrieveRow is a function that executes a SQL statement to
+ * retrieve a row of data from the database.
+ * cpuTime is the cpu_time value of the row to be retrieved.
+ * (note that it must exactly match the value stored.)
+ */
+unsigned int retrieveRow(unsigned long cpuTime) {
+  Serial.println("Retrieving row with time " + String(cpuTime) + "...");
+
+  // Create a String containing the SQL statement to retrieve a row.
+  String sql = "SELECT * FROM " + DATABASE_TABLE_NAME + " WHERE cpu_time = '" + cpuTime + "';";
+
+  // Send the SQL to Temboo so it can forward it to your database.
+  // In this case, we want to print the raw output we get from 
+  // Temboo.  This is just to demonstrate that the data really did
+  // get written to the database.
+  unsigned int result = executeSQLCommand(sql, true);
+
+  return result;
+}
+
+/*
+ * executeSQLCommand is a function for sending SQL statements to
+ * Temboo for execution on your database.
+ * sql is a String containing the SQL statement to be executed.
+ * showOutput is a boolean flag which if set to 'true' will cause
+ * the raw Choreo results to be printed to the Serial console.
+ */
+unsigned int executeSQLCommand(String sql, bool showOutput) {
+
+  // Create a TembooChoreo object
+  TembooChoreo choreo;
+
+  // Initialize the Choreo object.
+  choreo.begin();
+
+  // set Temboo account credentials
+  choreo.setAccountName(TEMBOO_ACCOUNT);
+  choreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
+  choreo.setAppKey(TEMBOO_APP_KEY);
+
+  // specify the Choreo to be run
+  choreo.setChoreo("/Library/MySQL/RunCommand");
+
+  // add inputs specifying the RDS endpoint address
+  // and the database name within that RDS instance
+  choreo.addInput("Server", DATABASE_SERVER);
+  choreo.addInput("DatabaseName", DATABASE_NAME);
+  
+  // add inputs for the MySQL user credentials
+  choreo.addInput("Username", DATABASE_USERNAME);
+  choreo.addInput("Password", DATABASE_PASSWORD);
+
+  // add the SQL command to be executed
+  choreo.addInput("SQL", sql);
+
+  // run the Choreo and wait for the results
+  // The return code (returnCode) will indicate success or failure 
+  unsigned int returnCode = choreo.run();
+
+  // return code of zero (0) means success
+  if (returnCode == 0) {
+
+    // print the raw output if requested.
+    if (showOutput) {
+      while (choreo.available()) {
+        char c = choreo.read();
+        Serial.print(c);
+      }
+    }
+  } else {
+    // return code of anything other than zero means failure  
+    // read and display any error messages
+    while (choreo.available()) {
+      char c = choreo.read();
+      Serial.print(c);
+    }
+    Serial.println("");
+  }
+
+  choreo.close();
+
+  return returnCode;
+}
+
+/*
+ * getSensorValue is a function to simulates reading the value of a sensor
+ */
+int getSensorValue() {
+  Serial.print("Reading sensor value...");
+  int value = analogRead(A0);
+  Serial.println("OK");
+  return value;
+}
+
+/*
+  IMPORTANT NOTE: TembooAccount.h:
+
+  TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
+  You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
+  by inserting your own Temboo account name and app key information. The contents of the file should
+  look like:
+
+  #define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
+  #define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
+  #define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
+
+  You can find your Temboo App Key information on the Temboo website, 
+  under My Account > Application Keys
+
+  The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
+
+  Keeping your account information in a separate file means you can share the main .ino file without worrying 
+  that you forgot to delete your credentials.
+*/
+

libraries/Bridge/examples/Temboo/SendDataToMySQL/TembooAccount.h

@@ -0,0 +1,4 @@
+#define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
+#define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
+#define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
+

libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/ToxicFacilitiesSearch.ino

@@ -22,7 +22,7 @@
 #include <Bridge.h>
 #include <Temboo.h>
 #include "TembooAccount.h" // contains Temboo account information
-// as described in the footer comment below
+                           // as described in the footer comment below
 
 // the zip code to search for toxin-emitting facilities
 String US_ZIP_CODE = "11215";
@@ -35,7 +35,7 @@ void setup() {
     
   // for debugging, wait until a serial console is connected
   delay(4000);
-  while (!Serial);
+  while(!Serial);
   Bridge.begin();
 }
 
@@ -83,7 +83,7 @@ void loop()
       // the output filters we specified will return comma delimited
       // lists containing the name and street address of the facilities
       // located in the specified zip code.
-      while (FacilitiesSearchByZipChoreo.available()) {
+      while(FacilitiesSearchByZipChoreo.available()) {
         String name = FacilitiesSearchByZipChoreo.readStringUntil('\x1F');
         name.trim();
 
@@ -123,7 +123,7 @@ void loop()
             printResult(facility, address);
           }
 
-        } while (i >= 0);
+        }while (i >= 0);
         facility = facilities.substring(facilityStart);
         address = addresses.substring(addressStart);
         printResult(facility, address);
@@ -131,7 +131,7 @@ void loop()
         Serial.println("No facilities found in zip code " + US_ZIP_CODE);
       }
     } else {
-      while (FacilitiesSearchByZipChoreo.available()) {
+      while(FacilitiesSearchByZipChoreo.available()) {
         char c = FacilitiesSearchByZipChoreo.read();
         Serial.print(c);
       }

libraries/Bridge/examples/Temboo/UpdateFacebookStatus/UpdateFacebookStatus.ino

@@ -27,7 +27,7 @@
 #include <Bridge.h>
 #include <Temboo.h>
 #include "TembooAccount.h" // contains Temboo account information, 
-// as described in the footer comment below
+                           // as described in the footer comment below
 
 /*** SUBSTITUTE YOUR VALUES BELOW: ***/
 
@@ -46,7 +46,7 @@ void setup() {
   
   // For debugging, wait until a serial console is connected.
   delay(4000);
-  while (!Serial);
+  while(!Serial);
   Bridge.begin();
 }
 
@@ -96,7 +96,7 @@ void loop() {
     // note that in this case, we're just printing the raw response from Facebook.
     // see the examples on using Temboo SDK output filters at http://www.temboo.com/arduino
     // for information on how to filter this data    
-    while (SetStatusChoreo.available()) {
+    while(SetStatusChoreo.available()) {
       char c = SetStatusChoreo.read();
       Serial.print(c);
     }

libraries/Bridge/examples/Temboo/UploadToDropbox/UploadToDropbox.ino

@@ -32,7 +32,7 @@
 #include <Bridge.h>
 #include <Temboo.h>
 #include "TembooAccount.h" // contains Temboo account information
-// as described in the footer comment below
+                           // as described in the footer comment below
 
 
 /*** SUBSTITUTE YOUR VALUES BELOW: ***/
@@ -60,7 +60,7 @@ void setup() {
   
   // For debugging, wait until a serial console is connected.
   delay(4000);
-  while (!Serial);
+  while(!Serial);
   Bridge.begin();
 }
 
@@ -103,7 +103,7 @@ void loop()
     // next, the root folder on Dropbox relative to which the file path is specified.
     // to work with the Dropbox app you created earlier, this should be left as "sandbox"
     // if your Dropbox app has full access to your files, specify "dropbox"
-    UploadFileChoreo.addInput("Root", "sandbox");
+    UploadFileChoreo.addInput("Root","sandbox");
 
     // next, the Base64 encoded file data to upload
     UploadFileChoreo.addInput("FileContents", base64EncodedData);
@@ -171,7 +171,7 @@ String base64Encode(String toEncode) {
     
     // read in the choreo results, and return the "Base64EncodedText" output value.
     // see http://www.temboo.com/arduino for more details on using choreo outputs.
-  while (Base64EncodeChoreo.available()) {
+    while(Base64EncodeChoreo.available()) {
       // read the name of the output item
       String name = Base64EncodeChoreo.readStringUntil('\x1F');
       name.trim();
@@ -180,7 +180,7 @@ String base64Encode(String toEncode) {
       String data = Base64EncodeChoreo.readStringUntil('\x1E');
       data.trim();
 
-    if (name == "Base64EncodedText") {
+      if(name == "Base64EncodedText") {
         return data;
       }
     }

libraries/Temboo/library.properties

@@ -1,8 +1,10 @@
 name=Temboo
-version=1.0
 author=Temboo
-maintainer=Temboo <support@temboo.com>
+email=support@temboo.com
 sentence=This library enables calls to Temboo, a platform that connects the Yun to 100+ APIs.
 paragraph=Temboo is a platform that provides normalized access to 100+ APIs, databases, code utilities and more. This library enables the Yun to connect to Temboo, making it simple to interact with a vast array of web-based resources and services.
 url=http://www.temboo.com
-architectures=*
+architectures=avr
+version=1.0
+dependencies=
+core-dependencies=arduino (>=1.5.0)