arduino/esp8266
1
0
Fork 0
mirror of https://github.com/esp8266/Arduino.git synced 2025-07-30 16:24:09 +03:00
Code Activity

Updated SoftwareSerial examples so that they work easier with Leonardo and Mega

Browse Source
This commit is contained in:
Tom Igoe
2012-05-25 09:38:44 -04:00
parent 6e8e13d7b3
commit a24999d5a5
2 changed files with 32 additions and 12 deletions
Download Patch File Download Diff File Expand all files Collapse all files

24
libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino
View File

@ -5,11 +5,20 @@
Receives from software serial, sends to hardware serial.
The circuit:
* RX is digital pin 2 (connect to TX of other device)
* TX is digital pin 3 (connect to RX of other device)
* RX is digital pin 10 (connect to TX of other device)
* TX is digital pin 11 (connect to RX of other device)
Note:
Not all pins on the Mega and Mega 2560 support change interrupts,
so only the following can be used for RX:
10, 11, 12, 13, 50, 51, 52, 53, 62, 63, 64, 65, 66, 67, 68, 69
Not all pins on the Leonardo support change interrupts,
so only the following can be used for RX:
8, 9, 10, 11, 14 (MISO), 15 (SCK), 16 (MOSI).
created back in the mists of time
modified 9 Apr 2012
modified 25 May 2012
by Tom Igoe
based on Mikal Hart's example
@ -18,17 +27,17 @@
*/
#include <SoftwareSerial.h>
SoftwareSerial mySerial(2, 3); // RX, TX
SoftwareSerial mySerial(10, 11); // RX, TX
void setup()
{
// Open serial communications and wait for port to open:
// Open serial communications and wait for port to open:
Serial.begin(57600);
while (!Serial) {
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo only
}
Serial.println("Goodnight moon!");
// set the data rate for the SoftwareSerial port
@ -43,3 +52,4 @@ void loop() // run over and over
if (Serial.available())
mySerial.write(Serial.read());
}