Initial Arduino IDE based on Processing.

build/shared/lib/avrlib/rsl/satmb.h

@@ -0,0 +1,113 @@
+/*! \file satmb.h \brief Satellite Motherboard Driver Functions. */
+//*****************************************************************************
+//
+// File Name	: 'satmb.h'
+// Title		: Satellite Motherboard Driver Functions
+// Author		: Pascal Stang - Copyright (C) 2004
+// Created		: 2004.10.13
+// Revised		: 2004.10.13
+// Version		: 0.1
+// Target MCU	: Atmel AVR series
+// Editor Tabs	: 4
+//
+// This code is distributed under the GNU Public License
+//		which can be found at http://www.gnu.org/licenses/gpl.txt
+//
+//*****************************************************************************
+
+#ifndef SATMB_H
+#define SATMB_H
+
+#include "dallas.h"
+#include "dallasids.h"
+
+
+// defines and typedefs
+
+// SAT-MB serial port control
+// CTS is an output signal
+#define SATMB_SER_CTS_PORT			PORTB
+#define SATMB_SER_CTS_DDR			DDRB
+#define SATMB_SER_CTS_PORTIN		PINB
+#define SATMB_SER_CTS_PIN			PB5
+// RTS is an input signal
+#define SATMB_SER_RTS_PORT			PORTB
+#define SATMB_SER_RTS_DDR			DDRB
+#define SATMB_SER_RTS_PORTIN		PINB
+#define SATMB_SER_RTS_PIN			PB6
+// Serial Port Power Control (set low to turn off)
+#define SATMB_SER_PWR_PORT			PORTD
+#define SATMB_SER_PWR_DDR			DDRD
+#define SATMB_SER_PWR_PORTIN		PIND
+#define SATMB_SER_PWR_PIN			PD5
+
+// SAT-MB Linx Radio Transceiver
+// Non-UART RX line (receive)
+#define SATMB_LINX_IO_RX_PORT		PORTD
+#define SATMB_LINX_IO_RX_DDR		DDRD
+#define SATMB_LINX_IO_RX_PORTIN		PIND
+#define SATMB_LINX_IO_RX_PIN		PD4
+// Non-UART TX line (transmit)
+#define SATMB_LINX_IO_TX_PORT		PORTB
+#define SATMB_LINX_IO_TX_DDR		DDRB
+#define SATMB_LINX_IO_TX_PORTIN		PINB
+#define SATMB_LINX_IO_TX_PIN		PB7
+// Linx Radio Power Control (set low to turn off)
+#define SATMB_LINX_PWR_PORT			PORTD
+#define SATMB_LINX_PWR_DDR			DDRD
+#define SATMB_LINX_PWR_PORTIN		PIND
+#define SATMB_LINX_PWR_PIN			PD5
+// Radio Receive Signal Strength Indicator (RSSI)
+// this is an analog output
+#define SATMB_LINX_RSSI_PORT		PORTF
+#define SATMB_LINX_RSSI_DDR			DDRF
+#define SATMB_LINX_RSSI_PORTIN		PINF
+#define SATMB_LINX_RSSI_PIN			PF7
+
+// SAT-MB Direct Dallas Bus Driver
+// Dallas Line Pin
+#define SATMB_DALLAS_LINE_PORT		PORTE
+#define SATMB_DALLAS_LINE_DDR		DDRE
+#define SATMB_DALLAS_LINE_PORTIN	PINE
+#define SATMB_DALLAS_LINE_PIN		PE7
+// Dallas OC-Tx Pin
+#define SATMB_DALLAS_TX_PORT		PORTE
+#define SATMB_DALLAS_TX_DDR			DDRE
+#define SATMB_DALLAS_TX_PORTIN		PINE
+#define SATMB_DALLAS_TX_PIN			PE3
+// Dallas Strong-Pullup Pin
+#define SATMB_DALLAS_SPU_PORT		PORTE
+#define SATMB_DALLAS_SPU_DDR		DDRE
+#define SATMB_DALLAS_SPU_PORTIN		PINE
+#define SATMB_DALLAS_SPU_PIN		PE4
+
+// functions
+
+//! Initializes SAT-MB hardware
+void satmbInit(void);
+
+//! Controls power to the SAT-MB serial port
+//  TRUE = on
+//  FALSE = off
+void satmbSetSerialPortPower(u08 on);
+
+//! Initializes the SAT-MB serial port RTS/CTS lines
+void satmbSerialRtsCtsInit(void);
+
+//! Returns the current state of the SAT-MB serial port RTS line
+u08 satmbSerialRtsCheck(void);
+
+//! Sets the current state of the SAT-MB serial port CTS line
+void satmbSerialCtsSet(u08 state);
+
+// Power control commands (dallas bus)
+u16 satmbV1GetCurrent(DallasSubsysId* targetSubsysId);
+u16 satmbV2GetCurrent(DallasSubsysId* targetSubsysId);
+u08 satmbV1GetOverCurrent(DallasSubsysId* targetSubsysId);
+u08 satmbV2GetOverCurrent(DallasSubsysId* targetSubsysId);
+void satmbV1SetPowerState(DallasSubsysId* targetSubsysId, u08 state);
+void satmbV2SetPower(DallasSubsysId* targetSubsysId, u08 state);
+
+void satmbSetPowerState(dallas_rom_id_T* targetRomId, u08 state);
+
+#endif