Initial Arduino IDE based on Processing.

build/shared/lib/avrlib/rsl/avrcore.h

@@ -0,0 +1,60 @@
+/*! \file avrcore.h \brief AVR-Core Board Driver Functions. */
+//*****************************************************************************
+//
+// File Name	: 'avrcore.h'
+// Title		: AVR-Core Board Driver Functions
+// Author		: Pascal Stang - Copyright (C) 2004
+// Created		: 2004.10.1
+// Revised		: 2004.10.1
+// Version		: 0.1
+// Target MCU	: Atmel AVR series
+// Editor Tabs	: 4
+//
+// This code is distributed under the GNU Public License
+//		which can be found at http://www.gnu.org/licenses/gpl.txt
+//
+//*****************************************************************************
+
+#ifndef AVRCORE_H
+#define AVRCORE_H
+
+// defines and typedefs
+#define AVRCORELATCH	(*((unsigned char*)0x4000))
+#define AVRCORELATCH_ADDRMASK	0x0F
+#define AVRCORELATCH_LEDMASK	0xF0
+
+// functions
+
+//! Initialize AVRCore hardware
+void avrcoreInit(void);
+
+//! Set the current external RAM page
+//  The AVRCore on-board external RAM is typically 512KBytes.
+//  The RAM is memory-mapped into the 32KByte address space from
+//  0x8000-0xFFFF, and must therefore be accessed in pages (32KB chunks).
+//  Use this function to select which of the 16 (0-15) 32KByte pages
+//  you wish to access.
+void avrcoreSetRamPage(u08 page);
+
+//! Set the state of the four LEDs on AVRCore
+//  leds bit0 => LED1 (0=off, 1=on)
+//  leds bit1 => LED2 (0=off, 1=on)
+//  leds bit2 => LED3 (0=off, 1=on)
+//  leds bit3 => LED4 (0=off, 1=on)
+void avrcoreSetLeds(u08 leds);
+
+//! Turn on selected LEDs
+//  '0' bit = no change
+//  '1' bit = turn on
+void avrcoreSetLedsOn(u08 leds);
+
+//! Turn off selected LEDs
+//  '0' bit = no change
+//  '1' bit = turn off
+void avrcoreSetLedsOff(u08 leds);
+
+//! Set on/off power setting of AVRCore serial port
+//  (0=off, 1=on)
+void avrcoreSetSerialPortPower(u08 on);
+
+#endif