Initial Arduino IDE based on Processing.

build/shared/lib/avrlib/megaio/megaio.h

@@ -0,0 +1,57 @@
+/*! \file megaio.h \brief MegaIO Control/Access function library. */
+//*****************************************************************************
+//
+// File Name	: 'megaio.h'
+// Title		: MegaIO Control/Access function library
+// Author		: Pascal Stang - Copyright (C) 2004
+// Created		: 5/18/2004
+// Revised		: 5/18/2004
+// Version		: 0.1
+// Target MCU	: Atmel AVR series
+// Editor Tabs	: 4
+//
+// This code is distributed under the GNU Public License
+//		which can be found at http://www.gnu.org/licenses/gpl.txt
+//
+//*****************************************************************************
+
+#ifndef MEGAIO_H
+#define MEGAIO_H
+
+#include "megaio/megaioreg.h"	// include MegaIO register definitions
+
+// defines
+
+// function prototypes
+
+//! initialize the MegaIO interface
+u08 megaioInit(void);
+//! write an 8-32 bit number to a MegaIO register
+void megaioWriteReg(unsigned char regnum, unsigned char nbytes, unsigned long data);
+//! read an 8-32 bit number from a MegaIO register
+unsigned long megaioReadReg(unsigned char regnum, unsigned char nbytes);
+
+//! set the baudrate of the MegaIO serial port
+void megaioSetBaudRate(u32 baudrate);
+//! send a byte out the MegaIO serial port
+void megaioSendByte(u08 data);
+//! get a byte from the MegaIO serial port
+int megaioGetByte(void);
+//! get a complete receive buffer with data from MegaIO serial port
+cBuffer* megaioGetRxBuffer(void);
+
+//! turn on MegaIO PWM and set for bitRes resolution
+void megaioPWMInit(u08 bitRes);
+//! turn off MegaIO PWM
+void megaioPWMOff(void);
+//! set MegaIO PWM1A duty cycle
+void megaioPWMASet(u16 pwmDuty);
+//! set MegaIO PWM1B duty cycle
+void megaioPWMBSet(u16 pwmDuty);
+//! set MegaIO prescaler division rate
+void megaioSetPrescaler(u08 prescaleDiv);
+
+//! do A/D conversion on channel [ch] and return result
+u16 megaioA2DConvert(u08 ch);
+
+#endif