Format lists for readability (#5082)

Changed in-line style to bulleted lists for improved readability

doc/esp8266wifi/station-class.rst

@@ -73,7 +73,10 @@ The simplest overload of ``begin`` is as follows:
 
 Calling it will enable station mode and connect to the last used access point based on configuration saved in flash memory.
 
-Notes: \* It is possible that calling ``begin`` will result in the module being in STA + softAP mode if the module was previously placed into AP mode. \* If you notice strange behavior with DNS or other network functionality, check which mode your module is in (see ``WiFi.mode()`` in the `Generic Class Documentation <generic-class.rst#mode>`__).
+Notes:
+
+- It is possible that calling ``begin`` will result in the module being in STA + softAP mode if the module was previously placed into AP mode. 
+- If you notice strange behavior with DNS or other network functionality, check which mode your module is in (see ``WiFi.mode()`` in the `Generic Class Documentation <generic-class.rst#mode>`__).
 
 Below is the syntax of another overload of ``begin`` with the all possible parameters:
 
@@ -81,8 +84,13 @@ Below is the syntax of another overload of ``begin`` with the all possible param
 
     WiFi.begin(ssid, password, channel, bssid, connect)
 
-Meaning of parameters is as follows: \* ``ssid`` - a character string containing the SSID of Access Point we would like to connect to, may have up to 32 characters \* ``password`` to the access point, a character string that should be minimum 8 characters long and not longer than 64 characters \* ``channel`` of AP, if we like to operate using specific channel, otherwise this parameter may be omitted \* ``bssid`` -
+Meaning of parameters is as follows:
-mac address of AP, this parameter is also optional \* ``connect`` - a ``boolean`` parameter that if set to ``false``, will instruct module just to save the other parameters without actually establishing connection to the access point
+
+- ``ssid`` - a character string containing the SSID of Access Point we would like to connect to, may have up to 32 characters
+- ``password`` to the access point, a character string that should be minimum 8 characters long and not longer than 64 characters 
+- ``channel`` of AP, if we like to operate using specific channel, otherwise this parameter may be omitted 
+- ``bssid`` - mac address of AP, this parameter is also optional 
+- ``connect`` - a ``boolean`` parameter that if set to ``false``, will instruct module just to save the other parameters without actually establishing connection to the access point
 
 config
 ^^^^^^
@@ -239,7 +247,13 @@ Wait until module connects to the access point. This function is intended for mo
 
     WiFi.waitForConnectResult()
 
-Function returns one of the following connection statuses: \* ``WL_CONNECTED`` after successful connection is established \* ``WL_NO_SSID_AVAIL``\ in case configured SSID cannot be reached \* ``WL_CONNECT_FAILED`` if password is incorrect \* ``WL_IDLE_STATUS`` when Wi-Fi is in process of changing between statuses \* ``WL_DISCONNECTED`` if module is not configured in station mode
+Function returns one of the following connection statuses: 
+
+- ``WL_CONNECTED`` after successful connection is established 
+- ``WL_NO_SSID_AVAIL`` in case configured SSID cannot be reached 
+- ``WL_CONNECT_FAILED`` if password is incorrect 
+- ``WL_IDLE_STATUS`` when Wi-Fi is in process of changing between statuses 
+- ``WL_DISCONNECTED`` if module is not configured in station mode
 
 Configuration
 ~~~~~~~~~~~~~
@@ -428,6 +442,7 @@ Return the status of Wi-Fi connection.
 .. code:: cpp
 
     WiFi.status()
+::
 
 Function returns one of the following connection statuses: