arduino/esp8266
1
0
Fork 0
mirror of https://github.com/esp8266/Arduino.git synced 2025-04-21 10:26:06 +03:00
Code

Removed Classic OTA

Browse Source
This commit is contained in:
krzychb 2016-03-08 20:45:43 +01:00
parent d2d1ca2fd2
commit 8fc6aefbb2
1 changed files with 4 additions and 84 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

84
doc/ota_updates/ota_updates.md
View File

@ -10,8 +10,6 @@ title: OTA Update
* [Arduino IDE](#arduino-ide) * [Arduino IDE](#arduino-ide)
* [Requirements](#requirements) * [Requirements](#requirements)
* [Application Example](#application-example) * [Application Example](#application-example)
* [Classic OTA](#classic-ota)
* [ArduinoOTA](#arduinoota)
* [Password Protection](#password-protection) * [Password Protection](#password-protection)
* [Troubleshooting](#troubleshooting) * [Troubleshooting](#troubleshooting)
* [Web Browser](#web-browser) * [Web Browser](#web-browser)
@ -108,88 +106,10 @@ Uploading modules wirelessly from Arduino IDE is intended for the following typi
### Application Example ### Application Example
Currently there are two software configurations that support OTA updates. Instructions below demonstrate configuration of OTA on NodeMCU 1.0 (ESP-12E Module) board. You can use any other board assuming that it meets [requirements](#basic-requirements) described above. Screen captures have been made on Windows 7 and this instruction is valid for all operating systems supported by Arduino IDE. Differnces are minor like for instance name of serial port on Linux and MacOS.
- [Classic OTA](#classic-ota-configuration): Arduino IDE 1.6.5 and 1.6.5-947-g39819f0 (of July 23, 2015) version of ESP8266 board support platform package that provides first OTA implementation, yet without support for [ArduinoOTA](https://github.com/esp8266/Arduino/tree/master/libraries/ArduinoOTA) library. This particular configuration soon will be depreciated in favor of new implementation described below.
- [ArduinoOTA](#arduinoota-configuration): Arduino IDE 1.6.7 and 2.0.0 version of platform package. Arduino IDE 1.6.7 is the first release that provides support for [ArduinoOTA](https://github.com/esp8266/Arduino/tree/master/libraries/ArduinoOTA) library.
For information how to install ESP8266 board support in Arduino IDE please refer to https://github.com/esp8266/Arduino#installing-with-boards-manager. Once installed, it is possible to switch between available versions of platform package using Boards Manager:
![Selecion of ESP8266 package version](selection-of-package-version.png)
Instructions below demonstrate how to configure both [Classic OTA](#classic-ota-configuration) and [ArduinoOTA](#arduinoota-configuration) using NodeMCU 1.0 (ESP-12E Module) board. You can use other boards assuming that they meet [requirements](#basic-requirements) described above.
#### Classic OTA
1. Before you begin, please make sure that you have the following installed: 1. Before you begin, please make sure that you have the following installed:
- Arduino IDE 1.6.5 and 1.6.5-947-g39819f0 version of platform package, - Arduino IDE 1.6.7 or newer and 2.0.0 or newer version of platform package following the process described under https://github.com/esp8266/Arduino#installing-with-boards-manager
- [Python](https://www.python.org/) 2.7 (do not install Python 3.5 that is not supported).
2. Now prepare the sketch and configuration for the upload over a serial port.
- Start Arduino IDE and load sketch DNS_SD_Arduino_OTA.ino available under File > Examples > ESP8266mDNS
![OTA sketch selection](ota-ide-sketch-selection.png)
**Note:** This sketch is available only for 1.6.5-947-g39819f0 (of July 23, 2015) platform package. It was removed in [#980](https://github.com/esp8266/Arduino/pull/980) from GitHub repository.
- Update SSID and password in the sketch so the module can join your Wi-Fi network
![SSID and password entry](ota-ide-ssid-pass-entry.png)
- Configure upload parameters as below (you may need to adjust configuration if you are using a different module):
![configuration of serial upload](ota-ide-serial-upload-configuration.png)
3. Upload the sketch (Ctrl+U). Once done, open Serial Monitor (Ctrl+Shift+M) and check if module has joined your Wi-Fi network.
![check if module joined network](ota-ide-module-joined-wifi.png)
4. Only if module is connected to network, after a couple of seconds, the esp8266-ota port will show up in Arduino IDE:
![selection of OTA port](ota-ide-ota-port-selection.png)
5. Now get ready for your first OTA upload by changing configuration settings as follows:
![configuration of OTA upload](ota-ide-ota-upload-configuration.png)
**Note:** If you do not see “Upload Using: OTA” option available for “NodeMCU 1.0 (ESP-12E Module)” board, please upload the latest [boards.txt](https://github.com/esp8266/Arduino/blob/master/boards.txt) file from GitHub repository, replace existing file and restart Arduino IDE.
6. If you have successfully completed all the above steps, you can upload (Ctrl+U) the same (or any other) sketch over OTA:
![OTA upload complete](ota-ide-ota-upload-complete.png)
**Note:** To be able to upload your sketch over and over again using OTA, you need to embed OTA routines inside. Please use DNS_SD_Arduino_OTA.ino as an example.
In case of issues please refer to information provided in section [Troubleshooting](#troubleshooting). Successful OTA process looks like below on serial terminal:
```
Arduino OTA Test
Sketch size: 346664
Free size: 700416
IP address: 192.168.1.100
Update Start: ip:192.168.1.10, port:48266, size:346672
Update Success: 6113
Rebooting...
ets Jan 8 2013,rst cause:1, boot mode:(3,7)
load 0x4010f000, len 1264, room 16
tail 0
chksum 0x42
csum 0x42
@cp:0
ld
Arduino OTA Test
Sketch size: 346664
Free size: 700416
IP address: 192.168.1.100
```
**Note:** Sketch and free memory sizes as well as IP addresses depend on your particular s/w and h/w configuration.
#### ArduinoOTA
1. Before you begin, please make sure that you have the following installed:
- Arduino IDE 1.6.7 and 2.0.0 version of platform package following the process described under https://github.com/esp8266/Arduino#installing-with-boards-manager
- [Python](https://www.python.org/) 2.7 (do not install Python 3.5 that is not supported): - [Python](https://www.python.org/) 2.7 (do not install Python 3.5 that is not supported):
**Note:** Windows users should select “Add python.exe to Path” (see below – this option is not selected by default). **Note:** Windows users should select “Add python.exe to Path” (see below – this option is not selected by default).