arduino/esp8266
1
0
Fork 0
mirror of https://github.com/esp8266/Arduino.git synced 2025-04-21 10:26:06 +03:00
Code

Fixed broken links in ota_updates/readme.rst

Browse Source 
Replaced links to filesystem.md with filesystem.rst
This commit is contained in:
Michael 2017-11-15 18:57:09 +01:00 committed by Ivan Grokhotkov
parent 03f1a540ca
commit 7de58d9671
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
doc/ota_updates/readme.rst
View File

@ -57,7 +57,7 @@ Basic Requirements
Flash chip size should be able to hold the old sketch (currently running) and the new sketch (OTA) at the same time. Flash chip size should be able to hold the old sketch (currently running) and the new sketch (OTA) at the same time.
Keep in mind that the File system and EEPROM for example needs space too (one time) see `flash layout <../filesystem.md#flash-layout>`__. Keep in mind that the File system and EEPROM for example needs space too (one time) see `flash layout <../filesystem.rst#flash-layout>`__.
.. code:: cpp .. code:: cpp
@ -226,7 +226,7 @@ If this is the case, then most likely ESP module has not been reset after initia
The most common causes of OTA failure are as follows: \* not enough physical memory on the chip (e.g. ESP01 with 512K flash memory is not enough for OTA), \* too much memory declared for SPIFFS so new sketch will not fit between existing sketch and SPIFFS – see `Update process - memory view <#update-process---memory-view>`__, \* too little memory declared in Arduino IDE for your selected board (i.e. less than physical size), \* not resetting the ESP module after initial upload using serial port. The most common causes of OTA failure are as follows: \* not enough physical memory on the chip (e.g. ESP01 with 512K flash memory is not enough for OTA), \* too much memory declared for SPIFFS so new sketch will not fit between existing sketch and SPIFFS – see `Update process - memory view <#update-process---memory-view>`__, \* too little memory declared in Arduino IDE for your selected board (i.e. less than physical size), \* not resetting the ESP module after initial upload using serial port.
For more details regarding flash memory layout please check `File system <https://github.com/esp8266/Arduino/blob/master/doc/filesystem.md>`__. For overview where new sketch is stored, how it is copied and how memory is organized for the purpose of OTA see `Update process - memory view <#update-process---memory-view>`__. For more details regarding flash memory layout please check `File system <../filesystem.rst>`__. For overview where new sketch is stored, how it is copied and how memory is organized for the purpose of OTA see `Update process - memory view <#update-process---memory-view>`__.
Web Browser Web Browser
----------- -----------