arduino/esp8266
1
0
Fork 0
mirror of https://github.com/esp8266/Arduino.git synced 2025-07-30 16:24:09 +03:00
Code Activity

Moving sam3s peripheral library to more global sam library

Browse Source
This commit is contained in:
Thibaut VIARD
2011-06-21 00:42:25 +02:00
parent 61c55be1cb
commit 7c708132c1
107 changed files with 0 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

167
hardware/sam/system/libsam/source/pmc.c Normal file
View File

@ -0,0 +1,167 @@
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "chip.h"
#include <assert.h>
/*----------------------------------------------------------------------------
* Local definitions
*----------------------------------------------------------------------------*/
#define MASK_STATUS0 0xFFFFFFFC
#define MASK_STATUS1 0xFFFFFFFF
/*----------------------------------------------------------------------------
* Exported functions
*----------------------------------------------------------------------------*/
/**
* \brief Enables the clock of a peripheral. The peripheral ID is used
* to identify which peripheral is targetted.
*
* \note The ID must NOT be shifted (i.e. 1 << ID_xxx).
*
* \param id Peripheral ID (ID_xxx).
*/
extern void PMC_EnablePeripheral( uint32_t dwId )
{
assert( dwId < 35 ) ;
if ( dwId < 32 )
{
if ( (PMC->PMC_PCSR0 & ((uint32_t)1 << dwId)) == ((uint32_t)1 << dwId) )
{
// TRACE_DEBUG( "PMC_EnablePeripheral: clock of peripheral" " %u is already enabled\n\r", dwId ) ;
}
else
{
PMC->PMC_PCER0 = 1 << dwId ;
}
}
else
{
dwId -= 32;
if ((PMC->PMC_PCSR1 & ((uint32_t)1 << dwId)) == ((uint32_t)1 << dwId))
{
// TRACE_DEBUG( "PMC_EnablePeripheral: clock of peripheral" " %u is already enabled\n\r", dwId + 32 ) ;
}
else
{
PMC->PMC_PCER1 = 1 << dwId ;
}
}
}
/**
* \brief Disables the clock of a peripheral. The peripheral ID is used
* to identify which peripheral is targetted.
*
* \note The ID must NOT be shifted (i.e. 1 << ID_xxx).
*
* \param id Peripheral ID (ID_xxx).
*/
extern void PMC_DisablePeripheral( uint32_t dwId )
{
assert( dwId < 35 ) ;
if ( dwId < 32 )
{
if ( (PMC->PMC_PCSR0 & ((uint32_t)1 << dwId)) != ((uint32_t)1 << dwId) )
{
// TRACE_DEBUG("PMC_DisablePeripheral: clock of peripheral" " %u is not enabled\n\r", dwId ) ;
}
else
{
PMC->PMC_PCDR0 = 1 << dwId ;
}
}
else
{
dwId -= 32 ;
if ( (PMC->PMC_PCSR1 & ((uint32_t)1 << dwId)) != ((uint32_t)1 << dwId) )
{
// TRACE_DEBUG( "PMC_DisablePeripheral: clock of peripheral" " %u is not enabled\n\r", dwId + 32 ) ;
}
else
{
PMC->PMC_PCDR1 = 1 << dwId ;
}
}
}
/**
* \brief Enable all the periph clock via PMC.
*/
extern void PMC_EnableAllPeripherals( void )
{
PMC->PMC_PCER0 = MASK_STATUS0 ;
while ( (PMC->PMC_PCSR0 & MASK_STATUS0) != MASK_STATUS0 ) ;
PMC->PMC_PCER1 = MASK_STATUS1 ;
while ( (PMC->PMC_PCSR1 & MASK_STATUS1) != MASK_STATUS1 ) ;
// TRACE_DEBUG( "Enable all periph clocks\n\r" ) ;
}
/**
* \brief Disable all the periph clock via PMC.
*/
extern void PMC_DisableAllPeripherals( void )
{
PMC->PMC_PCDR0 = MASK_STATUS0 ;
while ( (PMC->PMC_PCSR0 & MASK_STATUS0) != 0 ) ;
PMC->PMC_PCDR1 = MASK_STATUS1 ;
while ( (PMC->PMC_PCSR1 & MASK_STATUS1) != 0 ) ;
// TRACE_DEBUG( "Disable all periph clocks\n\r" ) ;
}
/**
* \brief Get Periph Status for the given peripheral ID.
*
* \param id Peripheral ID (ID_xxx).
*/
extern uint32_t PMC_IsPeriphEnabled( uint32_t dwId )
{
assert( dwId < 35 ) ;
if ( dwId < 32 )
{
return ( PMC->PMC_PCSR0 & (1 << dwId) ) ;
}
else {
return ( PMC->PMC_PCSR1 & (1 << (dwId - 32)) ) ;
}
}