mirror of
https://github.com/esp8266/Arduino.git
synced 2025-07-30 16:24:09 +03:00
Moving sam3s peripheral library to more global sam library
This commit is contained in:
Thibaut VIARD
356
hardware/sam/system/libsam/source/pio.c
Normal file
356
hardware/sam/system/libsam/source/pio.c
Normal file
@ -0,0 +1,356 @@
|
||||
/* ----------------------------------------------------------------------------
|
||||
* ATMEL Microcontroller Software Support
|
||||
* ----------------------------------------------------------------------------
|
||||
* Copyright (c) 2010, Atmel Corporation
|
||||
*
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* - Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the disclaimer below.
|
||||
*
|
||||
* Atmel's name may not be used to endorse or promote products derived from
|
||||
* this software without specific prior written permission.
|
||||
*
|
||||
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
/** \file */
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
#include "chip.h"
|
||||
|
||||
/**
|
||||
* \brief Configures Pio pin internal pull-up.
|
||||
*
|
||||
* \param pPio Pointer to a PIO controller.
|
||||
* \param dwMask Bitmask of one or more pin(s) to configure.
|
||||
* \param dwPullUpEnable Indicates if the pin(s) internal pull-up shall be configured.
|
||||
*/
|
||||
extern void PIO_DisableInterrupt( Pio *pPio, const uint32_t dwMask )
|
||||
{
|
||||
/* Disable interrupts on the pin */
|
||||
pPio->PIO_IDR = dwMask ;
|
||||
}
|
||||
|
||||
/**
|
||||
* \brief Configures Pio pin internal pull-up.
|
||||
*
|
||||
* \param pPio Pointer to a PIO controller.
|
||||
* \param dwMask Bitmask of one or more pin(s) to configure.
|
||||
* \param dwPullUpEnable Indicates if the pin(s) internal pull-up shall be configured.
|
||||
*/
|
||||
extern void PIO_PullUp( Pio *pPio, const uint32_t dwMask, const uint32_t dwPullUpEnable )
|
||||
{
|
||||
/* Disable interrupts on the pin(s) */
|
||||
pPio->PIO_IDR = dwMask ;
|
||||
|
||||
/* Enable the pull-up(s) if necessary */
|
||||
if ( dwPullUpEnable )
|
||||
{
|
||||
pPio->PIO_PUER = dwMask ;
|
||||
}
|
||||
else
|
||||
{
|
||||
pPio->PIO_PUDR = dwMask ;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* \brief Configures Glitch or Debouncing filter for input.
|
||||
*
|
||||
* \param pin Pointer to a Pin instance describing one or more pins.
|
||||
* \param cuttoff Cutt off frequency for debounce filter.
|
||||
*/
|
||||
extern void PIO_SetDebounceFilter( Pio* pPio, const uint32_t dwMask, const uint32_t dwCuttOff )
|
||||
{
|
||||
pPio->PIO_IFSCER = dwMask ; /* set Debouncing, 0 bit field no effect */
|
||||
pPio->PIO_SCDR = ((32678/(2*(dwCuttOff))) - 1) & 0x3FFF; /* the lowest 14 bits work */
|
||||
}
|
||||
|
||||
/**
|
||||
* \brief Sets a high output level on all the PIOs defined in the given Pin instance.
|
||||
* This has no immediate effects on PIOs that are not output, but the PIO
|
||||
* controller will memorize the value they are changed to outputs.
|
||||
*
|
||||
* \param pin Pointer to a Pin instance describing one or more pins.
|
||||
*/
|
||||
extern void PIO_Set( Pio* pPio, const uint32_t dwMask )
|
||||
{
|
||||
pPio->PIO_SODR = dwMask ;
|
||||
}
|
||||
|
||||
/**
|
||||
* \brief Returns 1 if one or more PIO of the given Pin instance currently have
|
||||
* a high level; otherwise returns 0. This method returns the actual value that
|
||||
* is being read on the pin. To return the supposed output value of a pin, use
|
||||
* PIO_GetOutputDataStatus() instead.
|
||||
*
|
||||
* \param pin Pointer to a Pin instance describing one or more pins.
|
||||
*
|
||||
* \return 1 if the Pin instance contains at least one PIO that currently has
|
||||
* a high level; otherwise 0.
|
||||
*/
|
||||
extern uint32_t PIO_Get( Pio* pPio, const EPioType dwType, const uint32_t dwMask )
|
||||
{
|
||||
uint32_t dwReg ;
|
||||
|
||||
if ( (dwType == PIO_OUTPUT_0) || (dwType == PIO_OUTPUT_1) )
|
||||
{
|
||||
dwReg = pPio->PIO_ODSR ;
|
||||
}
|
||||
else
|
||||
{
|
||||
dwReg = pPio->PIO_PDSR ;
|
||||
}
|
||||
|
||||
if ( (dwReg & dwMask) == 0 )
|
||||
{
|
||||
return 0 ;
|
||||
}
|
||||
else
|
||||
{
|
||||
return 1 ;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* \brief Sets a low output level on all the PIOs defined in the given Pin instance.
|
||||
* This has no immediate effects on PIOs that are not output, but the PIO
|
||||
* controller will memorize the value they are changed to outputs.
|
||||
*
|
||||
* \param pin Pointer to a Pin instance describing one or more pins.
|
||||
*/
|
||||
extern void PIO_Clear( Pio* pPio, const uint32_t dwMask )
|
||||
{
|
||||
pPio->PIO_CODR = dwMask ;
|
||||
}
|
||||
|
||||
/**
|
||||
* \brief Configures one pin of a PIO controller as being controlled by specific peripheral.
|
||||
*
|
||||
* \param pPio Pointer to a PIO controller.
|
||||
* \param dwType PIO type.
|
||||
* \param dwMask Bitmask of one or more pin(s) to configure.
|
||||
*/
|
||||
extern void PIO_SetPeripheral( Pio* pPio, EPioType dwType, uint32_t dwMask )
|
||||
{
|
||||
uint32_t dwABCDSR ;
|
||||
|
||||
/* Disable interrupts on the pin(s) */
|
||||
pPio->PIO_IDR = dwMask ;
|
||||
|
||||
switch ( dwType )
|
||||
{
|
||||
case PIO_PERIPH_A :
|
||||
dwABCDSR = pPio->PIO_ABCDSR[0] ;
|
||||
pPio->PIO_ABCDSR[0] &= (~dwMask & dwABCDSR) ;
|
||||
|
||||
dwABCDSR = pPio->PIO_ABCDSR[1];
|
||||
pPio->PIO_ABCDSR[1] &= (~dwMask & dwABCDSR) ;
|
||||
break ;
|
||||
|
||||
case PIO_PERIPH_B :
|
||||
dwABCDSR = pPio->PIO_ABCDSR[0] ;
|
||||
pPio->PIO_ABCDSR[0] = (dwMask | dwABCDSR) ;
|
||||
|
||||
dwABCDSR = pPio->PIO_ABCDSR[1] ;
|
||||
pPio->PIO_ABCDSR[1] &= (~dwMask & dwABCDSR) ;
|
||||
break ;
|
||||
|
||||
case PIO_PERIPH_C :
|
||||
dwABCDSR = pPio->PIO_ABCDSR[0] ;
|
||||
pPio->PIO_ABCDSR[0] &= (~dwMask & dwABCDSR) ;
|
||||
|
||||
dwABCDSR = pPio->PIO_ABCDSR[1] ;
|
||||
pPio->PIO_ABCDSR[1] = (dwMask | dwABCDSR) ;
|
||||
break ;
|
||||
|
||||
case PIO_PERIPH_D :
|
||||
dwABCDSR = pPio->PIO_ABCDSR[0] ;
|
||||
pPio->PIO_ABCDSR[0] = (dwMask | dwABCDSR) ;
|
||||
|
||||
dwABCDSR = pPio->PIO_ABCDSR[1] ;
|
||||
pPio->PIO_ABCDSR[1] = (dwMask | dwABCDSR) ;
|
||||
break ;
|
||||
|
||||
// other types are invalid in this function
|
||||
case PIO_INPUT :
|
||||
case PIO_OUTPUT_0 :
|
||||
case PIO_OUTPUT_1 :
|
||||
case PIO_NOT_A_PIN :
|
||||
return ;
|
||||
}
|
||||
|
||||
// Remove the pins from under the control of PIO
|
||||
pPio->PIO_PDR = dwMask ;
|
||||
}
|
||||
|
||||
/**
|
||||
* \brief Configures one or more pin(s) or a PIO controller as inputs. Optionally,
|
||||
* the corresponding internal pull-up(s) and glitch filter(s) can be enabled.
|
||||
*
|
||||
* \param pPio Pointer to a PIO controller.
|
||||
* \param dwMask Bitmask indicating which pin(s) to configure as input(s).
|
||||
* \param dwAttribute .
|
||||
*/
|
||||
extern void PIO_SetInput( Pio* pPio, uint32_t dwMask, uint32_t dwAttribute )
|
||||
{
|
||||
PIO_DisableInterrupt( pPio, dwMask ) ;
|
||||
PIO_PullUp( pPio, dwMask, dwAttribute & PIO_PULLUP ) ;
|
||||
|
||||
/* Enable Input Filter if necessary */
|
||||
if ( dwAttribute & (PIO_DEGLITCH | PIO_DEBOUNCE) )
|
||||
{
|
||||
pPio->PIO_IFER = dwMask ;
|
||||
}
|
||||
else
|
||||
{
|
||||
pPio->PIO_IFDR = dwMask ;
|
||||
}
|
||||
|
||||
/* Enable de-glitch or de-bounce if necessary */
|
||||
if ( dwAttribute & PIO_DEGLITCH )
|
||||
{
|
||||
pPio->PIO_IFSCDR = dwMask ;
|
||||
}
|
||||
else
|
||||
{
|
||||
if ( dwAttribute & PIO_DEBOUNCE )
|
||||
{
|
||||
pPio->PIO_IFSCER = dwMask ;
|
||||
}
|
||||
}
|
||||
|
||||
/* Configure pin as input */
|
||||
pPio->PIO_ODR = dwMask ;
|
||||
pPio->PIO_PER = dwMask ;
|
||||
}
|
||||
|
||||
/**
|
||||
* \brief Configures one or more pin(s) of a PIO controller as outputs, with the
|
||||
* given default value. Optionally, the multi-drive feature can be enabled
|
||||
* on the pin(s).
|
||||
*
|
||||
* \param pPio Pointer to a PIO controller.
|
||||
* \param dwMask Bitmask indicating which pin(s) to configure.
|
||||
* \param defaultValue Default level on the pin(s).
|
||||
* \param enableMultiDrive Indicates if the pin(s) shall be configured as open-drain.
|
||||
* \param enablePullUp Indicates if the pin shall have its pull-up activated.
|
||||
*/
|
||||
extern void PIO_SetOutput( Pio* pPio, uint32_t dwMask, uint32_t dwDefaultValue,
|
||||
uint32_t dwMultiDriveEnable, uint32_t dwPullUpEnable )
|
||||
{
|
||||
PIO_DisableInterrupt( pPio, dwMask ) ;
|
||||
PIO_PullUp( pPio, dwMask, dwPullUpEnable ) ;
|
||||
|
||||
/* Enable multi-drive if necessary */
|
||||
if ( dwMultiDriveEnable )
|
||||
{
|
||||
pPio->PIO_MDER = dwMask ;
|
||||
}
|
||||
else
|
||||
{
|
||||
pPio->PIO_MDDR = dwMask ;
|
||||
}
|
||||
|
||||
/* Set default value */
|
||||
if ( dwDefaultValue )
|
||||
{
|
||||
pPio->PIO_SODR = dwMask ;
|
||||
}
|
||||
else
|
||||
{
|
||||
pPio->PIO_CODR = dwMask ;
|
||||
}
|
||||
|
||||
/* Configure pin(s) as output(s) */
|
||||
pPio->PIO_OER = dwMask ;
|
||||
pPio->PIO_PER = dwMask ;
|
||||
}
|
||||
|
||||
/**
|
||||
*
|
||||
* \return 1 if the pins have been configured properly; otherwise 0.
|
||||
*/
|
||||
extern uint32_t PIO_Configure( Pio* pPio, const EPioType dwType, const uint32_t dwMask, const uint32_t dwAttribute )
|
||||
{
|
||||
/* Configure pins */
|
||||
switch ( dwType )
|
||||
{
|
||||
case PIO_PERIPH_A :
|
||||
case PIO_PERIPH_B :
|
||||
case PIO_PERIPH_C :
|
||||
case PIO_PERIPH_D :
|
||||
PIO_SetPeripheral( pPio, dwType, dwMask ) ;
|
||||
PIO_PullUp( pPio, dwMask, (dwAttribute & PIO_PULLUP) ) ;
|
||||
break;
|
||||
|
||||
case PIO_INPUT :
|
||||
switch ( (uint32_t)pPio )
|
||||
{
|
||||
case (uint32_t)PIOA :
|
||||
PMC_EnablePeripheral( ID_PIOA ) ;
|
||||
break ;
|
||||
|
||||
case (uint32_t)PIOB :
|
||||
PMC_EnablePeripheral( ID_PIOB ) ;
|
||||
break ;
|
||||
|
||||
case (uint32_t)PIOC :
|
||||
PMC_EnablePeripheral( ID_PIOC ) ;
|
||||
break ;
|
||||
}
|
||||
PIO_SetInput( pPio, dwMask, dwAttribute ) ;
|
||||
break;
|
||||
|
||||
case PIO_OUTPUT_0 :
|
||||
case PIO_OUTPUT_1 :
|
||||
PIO_SetOutput( pPio, dwMask, (dwType == PIO_OUTPUT_1),
|
||||
(dwAttribute & PIO_OPENDRAIN) ? 1 : 0,
|
||||
(dwAttribute & PIO_PULLUP) ? 1 : 0);
|
||||
break ;
|
||||
|
||||
default :
|
||||
return 0 ;
|
||||
}
|
||||
|
||||
return 1 ;
|
||||
}
|
||||
|
||||
/**
|
||||
* \brief Returns 1 if one or more PIO of the given Pin are configured to output a
|
||||
* high level (even if they are not output).
|
||||
* To get the actual value of the pin, use PIO_Get() instead.
|
||||
*
|
||||
* \param pPio Pointer to a Pin instance describing one or more pins.
|
||||
*
|
||||
* \return 1 if the Pin instance contains at least one PIO that is configured
|
||||
* to output a high level; otherwise 0.
|
||||
*/
|
||||
extern uint32_t PIO_GetOutputDataStatus( const Pio* pPio, const uint32_t dwMask )
|
||||
{
|
||||
if ( (pPio->PIO_ODSR & dwMask) == 0 )
|
||||
{
|
||||
return 0 ;
|
||||
}
|
||||
else
|
||||
{
|
||||
return 1 ;
|
||||
}
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user