Combining MemoryCard and SdFat libraries into SD library.

Defaulting to CS pin 4 (for Arduino Ethernet Shield).  Holding the SS pin high (for disabling W5100 on the Ethernet Shield).

libraries/SD/utility/examples/SdFatRemove/SdFatRemove.pde

@@ -0,0 +1,58 @@
+/*
+ * Remove Example
+ *
+ * This sketch shows how to use remove() to delete
+ * the file created by the SdFatAppend.pde example.
+ */
+#include <SdFat.h>
+#include <SdFatUtil.h> // use functions to print strings from flash memory
+
+Sd2Card card;
+SdVolume volume;
+SdFile root;
+SdFile file;
+
+// store error strings in flash to save RAM
+#define error(s) error_P(PSTR(s))
+
+void error_P(const char* str) {
+  PgmPrint("error: ");
+  SerialPrintln_P(str);
+  if (card.errorCode()) {
+    PgmPrint("SD error: ");
+    Serial.print(card.errorCode(), HEX);
+    Serial.print(',');
+    Serial.println(card.errorData(), HEX);
+  }
+  while(1);
+}
+
+void setup(void) {
+  Serial.begin(9600);
+  Serial.println();
+  PgmPrintln("Type any character to start");
+  while (!Serial.available());
+  
+  // initialize the SD card at SPI_HALF_SPEED to avoid bus errors with
+  // breadboards.  use SPI_FULL_SPEED for better performance.
+  if (!card.init(SPI_HALF_SPEED)) error("card.init failed");
+  
+  // initialize a FAT volume
+  if (!volume.init(&card)) error("volume.init failed");
+
+  // open the root directory
+  if (!root.openRoot(&volume)) error("openRoot failed");
+  
+  char name[] = "APPEND.TXT";
+  if (!file.open(&root, name, O_WRITE)) {
+    PgmPrint("Can't open "); 
+    Serial.println(name);
+    PgmPrintln("Run the append example to create the file.");
+    error("file.open failed");
+  }
+  if (!file.remove()) error("file.remove failed");
+  Serial.print(name);
+  PgmPrintln(" deleted.");
+}
+
+void loop(void) {}