arduino/esp8266
1
0
Fork 0
mirror of https://github.com/esp8266/Arduino.git synced 2025-06-23 19:21:59 +03:00
Code Activity

God I hate subversion.

Browse Source
This commit is contained in:
David A. Mellis
2008-01-22 23:52:02 +00:00
parent e5838c813f
commit 6b9d3ddb90
3 changed files with 0 additions and 246 deletions
Download Patch File Download Diff File Expand all files Collapse all files

95
hardware/libraries/Firmata/Firmata.h
View File

@ -1,95 +0,0 @@
/*
Firmata.h - Firmata library
Copyright (c) 2007 Free Software Foundation. All right reserved.
Written by Hans-Christoph Steiner <hans@at.or.at>
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef Firmata_h
#define Firmata_h
#include <inttypes.h>
class FirmataClass
{
private:
void systemReset(void);
public:
FirmataClass();
int available(void);
// serial receive actions
// send serial messages
void printVersion(void);
void sendAnalog(int, int);
void sendDigital(int, int);
void sendDigitalPortPair(int, int);
// internal actions
void loadState(void);
void saveState(void);
void resetState(void);
};
extern FirmataClass Firmata;
/*==============================================================================
* MACROS
*============================================================================*/
/* Version numbers for the protocol. The protocol is still changing, so these
* version numbers are important. This number can be queried so that host
* software can test whether it will be compatible with the currently
* installed firmware. */
#define FIRMATA_MAJOR_VERSION 1 // for non-compatible changes
#define FIRMATA_MINOR_VERSION 0 // for backwards compatible changes
// total number of pins currently supported
#define TOTAL_ANALOG_PINS 6
#define TOTAL_DIGITAL_PINS 14
// for comparing along with INPUT and OUTPUT
#define PWM 2
// for selecting digital inputs
#define PB 2 // digital input, pins 8-13
#define PC 3 // analog input port
#define PD 4 // digital input, pins 0-7
#define MAX_DATA_BYTES 2 // max number of data bytes in non-SysEx messages
// message command bytes
#define DIGITAL_MESSAGE 0x90 // send data for a digital pin
#define ANALOG_MESSAGE 0xE0 // send data for an analog pin (or PWM)
//#define PULSE_MESSAGE 0xA0 // proposed pulseIn/Out message (SysEx)
//#define SHIFTOUT_MESSAGE 0xB0 // proposed shiftOut message (SysEx)
#define REPORT_ANALOG_PIN 0xC0 // enable analog input by pin #
#define REPORT_DIGITAL_PORTS 0xD0 // enable digital input by port pair
#define START_SYSEX 0xF0 // start a MIDI SysEx message
#define SET_DIGITAL_PIN_MODE 0xF4 // set a digital pin to INPUT or OUTPUT
#define END_SYSEX 0xF7 // end a MIDI SysEx message
#define REPORT_VERSION 0xF9 // report firmware version
#define SYSTEM_RESET 0xFF // reset from MIDI
// these are used for EEPROM reading and writing
#define ANALOGINPUTSTOREPORT_LOW_BYTE 0x1F0 // analogInputsToReport is an int
#define ANALOGINPUTSTOREPORT_HIGH_BYTE 0x1F1 // analogInputsToReport is an int
#define REPORTDIGITALINPUTS_BYTE 0x1F2 //
#define DIGITALPINSTATUS_LOW_BYTE 0x1F3 // digitalPinStatus is an int
#define DIGITALPINSTATUS_HIGH_BYTE 0x1F4 // digitalPinStatus is an int
#define PWMSTATUS_LOW_BYTE 0x1F5 // pwmStatus is an int
#define PWMSTATUS_HIGH_BYTE 0x1F6 // pwmStatus is an int
#endif /* Firmata_h */