arduino/esp8266
1
0
Fork 0
mirror of https://github.com/esp8266/Arduino.git synced 2025-04-27 21:16:50 +03:00
Code

Merge pull request #117 from thomasfla/esp8266

Browse Source 
HardwareSerial: add other configs than 8N1
This commit is contained in:
Ivan Grokhotkov 2015-04-26 07:04:00 +08:00
commit 646a94c4a3
3 changed files with 32 additions and 33 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@ -62,8 +62,6 @@ more than 20 milliseconds is not recommended.
```Serial``` object works much the same way as on a regular Arduino. Apart from hardware FIFO (128 bytes for TX and RX) HardwareSerial has additional 256-byte TX and RX buffers. Both transmit and receive is interrupt-driven. Write and read functions only block the sketch execution when the respective FIFO/buffers are full/empty.
Only 8n1 mode is supported right now.
By default the diagnostic output from WiFi libraries is disabled when you call ```Serial.begin```. To enable debug output again, call ```Serial.setDebugOutput(true);```
#### WiFi(ESP8266WiFi library) ####

10
cores/esp8266/HardwareSerial.cpp
View File

@ -19,7 +19,7 @@
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Modified 31 March 2015 by Markus Sattler (rewrite the code for UART0 + UART1 support in ESP8266)
Modified 25 April 2015 by Thomas Flayols (add configuration different from 8N1 in ESP8266)
*/
#include <stdlib.h>
@ -86,7 +86,7 @@ void uart_disarm_tx_interrupt(uart_t* uart);
void uart_set_baudrate(uart_t* uart, int baud_rate);
int uart_get_baudrate(uart_t* uart);
uart_t* uart_init(UARTnr_t uart_nr, int baudrate);
uart_t* uart_init(UARTnr_t uart_nr, int baudrate, byte config);
void uart_uninit(uart_t* uart);
void uart_swap(uart_t* uart);
@ -278,7 +278,7 @@ int ICACHE_FLASH_ATTR uart_get_baudrate(uart_t* uart) {
return uart->baud_rate;
}
uart_t* ICACHE_FLASH_ATTR uart_init(UARTnr_t uart_nr, int baudrate) {
uart_t* ICACHE_FLASH_ATTR uart_init(UARTnr_t uart_nr, int baudrate, byte config) {
uint32_t conf1 = 0x00000000;
uart_t* uart = (uart_t*) os_malloc(sizeof(uart_t));
@ -314,7 +314,7 @@ uart_t* ICACHE_FLASH_ATTR uart_init(UARTnr_t uart_nr, int baudrate) {
break;
}
uart_set_baudrate(uart, baudrate);
WRITE_PERI_REG(UART_CONF0(uart->uart_nr), 0x3 << UART_BIT_NUM_S); // 8n1
WRITE_PERI_REG(UART_CONF0(uart->uart_nr), config);
uart_flush(uart);
uart_interrupt_enable(uart);
@ -493,7 +493,7 @@ void ICACHE_FLASH_ATTR HardwareSerial::begin(unsigned long baud, byte config) {
uart_set_debug(UART_NO);
}
_uart = uart_init(_uart_nr, baud);
_uart = uart_init(_uart_nr, baud, config);
if(_uart == 0) {
return;

53
cores/esp8266/HardwareSerial.h
View File

@ -21,6 +21,7 @@
Modified 3 December 2013 by Matthijs Kooijman
Modified 18 December 2014 by Ivan Grokhotkov (esp8266 platform support)
Modified 31 March 2015 by Markus Sattler (rewrite the code for UART0 + UART1 support in ESP8266)
Modified 25 April 2015 by Thomas Flayols (add configuration different from 8N1 in ESP8266)
*/
#ifndef HardwareSerial_h
@ -33,31 +34,31 @@
#define SERIAL_TX_BUFFER_SIZE 256
#define SERIAL_RX_BUFFER_SIZE 256
// // Define config for Serial.begin(baud, config);
// #define SERIAL_5N1 0x00
// #define SERIAL_6N1 0x02
// #define SERIAL_7N1 0x04
// #define SERIAL_8N1 0x06
// #define SERIAL_5N2 0x08
// #define SERIAL_6N2 0x0A
// #define SERIAL_7N2 0x0C
// #define SERIAL_8N2 0x0E
// #define SERIAL_5E1 0x20
// #define SERIAL_6E1 0x22
// #define SERIAL_7E1 0x24
// #define SERIAL_8E1 0x26
// #define SERIAL_5E2 0x28
// #define SERIAL_6E2 0x2A
// #define SERIAL_7E2 0x2C
// #define SERIAL_8E2 0x2E
// #define SERIAL_5O1 0x30
// #define SERIAL_6O1 0x32
// #define SERIAL_7O1 0x34
// #define SERIAL_8O1 0x36
// #define SERIAL_5O2 0x38
// #define SERIAL_6O2 0x3A
// #define SERIAL_7O2 0x3C
// #define SERIAL_8O2 0x3E
// Define config for Serial.begin(baud, config);
#define SERIAL_5N1 0x10
#define SERIAL_6N1 0x14
#define SERIAL_7N1 0x18
#define SERIAL_8N1 0x1c
#define SERIAL_5N2 0x30
#define SERIAL_6N2 0x34
#define SERIAL_7N2 0x38
#define SERIAL_8N2 0x3c
#define SERIAL_5E1 0x12
#define SERIAL_6E1 0x16
#define SERIAL_7E1 0x1a
#define SERIAL_8E1 0x1e
#define SERIAL_5E2 0x32
#define SERIAL_6E2 0x36
#define SERIAL_7E2 0x3a
#define SERIAL_8E2 0x3e
#define SERIAL_5O1 0x13
#define SERIAL_6O1 0x17
#define SERIAL_7O1 0x1b
#define SERIAL_8O1 0x1f
#define SERIAL_5O2 0x33
#define SERIAL_6O2 0x37
#define SERIAL_7O2 0x3b
#define SERIAL_8O2 0x3f
class cbuf;
@ -79,7 +80,7 @@ class HardwareSerial: public Stream {
HardwareSerial(UARTnr_t uart_nr);
void begin(unsigned long baud) {
begin(baud, 0);
begin(baud, SERIAL_8N1);
}
void begin(unsigned long, uint8_t);
void end();